collapse
Banded Hunting Gear Double U Hunting Supply

Author Topic: Waterfowl Boats, blinds etc.  (Read 129767 times)

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #120 on: December 04, 2013, 09:04:07 PM »
Finished...well, almost. Its testing and improvement time. 18' G3.
I started this two years ago. I fabricated new pedestal mounts so i can quickly swap out between seasons without changing the boat permanently. I used 3/4" conduit and tent pole brackets from an awning place. The frame only cost about $125, the netting was $80, but the jute was another $100. And i still dont have enough.

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #121 on: December 04, 2013, 09:19:06 PM »
The starboard side is fixed because of the console, but uses push pins for ease and quickness. The port side drops, and is lower to peak over while sitting down.

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #122 on: December 04, 2013, 09:30:43 PM »
The drop side is controlled by gravity only, using an "L" hook on a rope attached to a rope that is pulled. I may convert this to a foot operation using a piece of wood.

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #123 on: December 04, 2013, 09:32:06 PM »
Pic

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #124 on: December 05, 2013, 12:54:47 AM »
Some more pics. I was trying to figure out a way to keep the dog warm...and my arse....

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #125 on: December 05, 2013, 08:45:48 PM »
Added the foot pedal today. I also installed two portholes so the dogs can peak out. Some more pics.

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #126 on: December 05, 2013, 08:58:47 PM »
Last three...
Port side you can see the two portholes fore and aft. Missing is the beavertail dog ladder ( it was frozen to the deck and the outboard cover) and the outboard cover i made from two burlap bags sewn together. The jute ghillie strings were frozen, so it looks like a bad hair day, but really looks good. Time for a spray bottle of salt water...

Starboard (the fixed side) is not totally "ghillied out" yet. I still need a cover for the trolling motor.

Offline pens fan

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2011
  • Posts: 515
  • Location: eatonville
Re: Waterfowl Boats, blinds etc.
« Reply #127 on: December 05, 2013, 09:02:26 PM »
I found one safety issue on out test trip. My dog, Mace, likes to look right through the scissor framework that drops down....that could hurt. I'm thinking of some kind of netting.

Offline Brad Harshman

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2013
  • Posts: 556
  • Location: central WA
Re: Waterfowl Boats, blinds etc.
« Reply #128 on: December 13, 2013, 01:00:45 PM »
Hey Brad, how do you keep all of your grass etc from blowing off when trailering to the water? I'm in the process of building a frame for my 15' john boat and not quite sure what to do about covering it. Thanks.
When I'm towing my boat down the highway everything is rolled up.  The grass/foilage isn't really affected.  Here is my boat with the blind in the down position. I tuck everything inside the backing material and tie it up with small lengths of cord so it wont be torn apart by the wind.

Offline Badhabit

  • Off-Topics
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2007
  • Posts: 784
Re: Waterfowl Boats, blinds etc.
« Reply #129 on: December 30, 2013, 01:56:54 PM »
My duck and fishing machine.

Offline LndShrk

  • Cnut the Great
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Apr 2011
  • Posts: 354
  • Location: Stanwood
Re: Waterfowl Boats, blinds etc.
« Reply #130 on: December 30, 2013, 02:11:56 PM »
My duck and fishing machine.

The Hendrix Turf..  :rockin:

That boat gets it done..  :tup:

Offline Badhabit

  • Off-Topics
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: May 2007
  • Posts: 784
Re: Waterfowl Boats, blinds etc.
« Reply #131 on: December 30, 2013, 02:45:24 PM »
Sharkey, I'm working on putting together one of those Pvc pipe stereo's. 6.5" speakers, bluetooth and mp3 attachment with volume control powered by a 12-volt hookup.

Offline irishevox

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1495
  • Location: Whidbey Isalnd
  • Groups: n/a
Re: Waterfowl Boats, blinds etc.
« Reply #132 on: June 01, 2014, 08:20:29 PM »
Just did mine today got a free 10 ft and it was in rough shape.  Still need to build something to hold up camo on the sides.  All I had to do was paint the whole thing

Sent from my SAMSUNG-SM-G900A using Tapatalk

Member:  YKWTSASFFRO (The young Buck)

Offline cliffordingles

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2012
  • Posts: 134
  • Location: Galvin, WA
  • Groups: U.S. Army
Re: Waterfowl Boats, blinds etc.
« Reply #133 on: October 05, 2014, 09:33:29 PM »
Here my work in progress blind! should be done with the construction tomorrow.

Offline irishevox

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1495
  • Location: Whidbey Isalnd
  • Groups: n/a
Re: Waterfowl Boats, blinds etc.
« Reply #134 on: October 06, 2014, 07:15:04 AM »
nice keep'em comin ya;ll
Member:  YKWTSASFFRO (The young Buck)

 

* Recent Topics

WTS 28 gauge Stevens model 550/555 by stringer
[Today at 02:45:30 AM]


Youth weekend success 2018 by redi
[Yesterday at 11:47:49 PM]


Clamp on or threaded muzzle brakes? by Goshawk
[Yesterday at 11:22:25 PM]


For Sale- Winchester Extreme Weather 300 WM by BigGoonTuna
[Yesterday at 11:16:26 PM]


Polymer 80 lowers by Goshawk
[Yesterday at 11:04:10 PM]


Cow tags remain-Colockum by greenhead_killer
[Yesterday at 11:00:19 PM]


18 Bull points by dreamingbig
[Yesterday at 10:46:35 PM]


Out of the points game by dreamingbig
[Yesterday at 10:42:47 PM]


WTB - Taking Wife Turkey Hunting, Looking for Gear by hookr88
[Yesterday at 10:33:26 PM]


338 375 ruger build by Goshawk
[Yesterday at 10:27:25 PM]


WTB 30cal 200grn accubonds by Mulie87
[Yesterday at 10:17:41 PM]


6.5 creedmoor reviews?? by Biggerhammer
[Yesterday at 10:07:01 PM]


For Sale- Nosler Patriot.308 by Mulie87
[Yesterday at 10:02:35 PM]


AKC Chocolate Labs by Clark33
[Yesterday at 09:53:45 PM]


WTB wall tent package by asmith
[Yesterday at 09:38:51 PM]


Moa turret mil reticle? by dmoua
[Yesterday at 09:32:30 PM]


Read 'em and weep - 2017 Game harvest reports are out. by dscubame
[Yesterday at 09:30:59 PM]


FS; Spring cleaning by Cylvertip
[Yesterday at 09:23:06 PM]


Eastside Mule Deer Survival Study Update by ElaphusElatus
[Yesterday at 09:22:11 PM]


New Bow by demontang
[Yesterday at 09:18:32 PM]