collapse

Advertisement


Author Topic: DIY Euro  (Read 3520 times)

Offline Brushcrawler

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Mar 2016
  • Posts: 529
  • Location: West side
DIY Euro
« on: December 26, 2016, 04:15:13 PM »
This was an experiment, as much to see the process unfold and enjoy figuring out the steps with my son than for the final product.
We started by reading this several times:
http://hunting-washington.com/smf/index.php/topic,16008.msg181209.html#msg181209
Then we skinned and de-brained my blacktail skull which had been relaxing in the freezer..
Then we set up a 5 gallon bucket and aquarium heater.   
Three weeks later we had progress (1st picture).
Wife nearly ended the project due to the smell.  Even the dog wasn't interested.
Three more weeks and the skull was pretty clean (2nd picture).
Three weeks in a Dawn bath, changing the water every few days took out most of the grease. 
Project allowed inside the house for the first time.
Six hours in peroxide (not touching the antlers)
No smell and ready for the wall (3rd picture).
This turned out to be pretty easy to do, and a good learning experience!


There is not enough wilderness left in the world, or in the hearts of men.

Offline Mark251

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2015
  • Posts: 2608
  • Location: Spokane
Re: DIY Euro
« Reply #1 on: December 26, 2016, 04:21:27 PM »
Nice job  :tup:

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 8913
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: DIY Euro
« Reply #2 on: December 26, 2016, 05:05:44 PM »
Nice work right there,this is also my first year at it , yours looks a lot white than mine.did mine in one day with boiling, and presure washer.

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3533
  • Location: Pensacola, Florida
Re: DIY Euro
« Reply #3 on: December 26, 2016, 05:08:42 PM »
Looks good.  I also did mine with a little boiling and a pressure washer in one afternoon like the post above.

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 8913
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: DIY Euro
« Reply #4 on: December 26, 2016, 05:10:37 PM »
A lot more work than youtube let's on. Getting the teeth white seems.to take awhile.

Offline Milkman

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2016
  • Posts: 290
  • Location: Federal way
Re: DIY Euro
« Reply #5 on: December 26, 2016, 05:17:16 PM »
All look very good!

Offline blindluck

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1029
  • Location: Over yonder
Re: DIY Euro
« Reply #6 on: December 26, 2016, 05:31:46 PM »
If you crank your heater to run about 105 degrees it will usually only take 5-7 days to totally macerate, I spent a couple years doing them at temp a around 85 and taking 2 plus weeks to get all the meat free. Nice work

Offline lewy

  • Forum Sponsor
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 4003
  • Location: buckley
  • IBEW RMEF WSTA WCO NRA
Re: DIY Euro
« Reply #7 on: December 26, 2016, 06:34:04 PM »
Nice work! I've got a moose skull that's a bit crooked like that
Go hawks

Offline Brushcrawler

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Mar 2016
  • Posts: 529
  • Location: West side
Re: DIY Euro
« Reply #8 on: January 05, 2017, 04:24:45 PM »
Thanks blindluck, I've got a squirrel skull soaking at a higher temp now.
There is not enough wilderness left in the world, or in the hearts of men.

Offline O. hemionus

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 223
Re: DIY Euro
« Reply #9 on: January 07, 2017, 06:52:53 PM »
Keep a close eye on the squirrel skull. I had one macerating in a container outside during the fall (no additional heat) and in less than a week, the skull had fallen apart into several pieces. I was able to glue it back together, but it would have been easier if I had pulled out much earlier.

 


* Advertisement

* Recent Topics

“Frosty” 3 Year Story of my 2025 General WA Mule Deer Hunt by Boss .300 winmag
[Today at 05:51:48 AM]


As Promised, Another Washington Hunt VIDEO by DWAT
[Today at 05:19:41 AM]


Drew Pogue Quality by Transam2340
[Today at 01:55:55 AM]


Share your out of state experience by HighlandLofts
[Yesterday at 11:53:01 PM]


Softopper Canopies by jamesfromseattle
[Yesterday at 10:27:14 PM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by cem3434
[Yesterday at 09:43:44 PM]


Xlr element vs mdt hnt26 by Skunkedoutdoors
[Yesterday at 09:04:37 PM]


GL Late Tag holders by Schmalzfam
[Yesterday at 08:35:57 PM]


Upland bird carry options by EnglishSetter
[Yesterday at 07:43:26 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 07:16:19 PM]


2025 deer, let's see em! by Twispriver
[Yesterday at 06:24:01 PM]


328/329 reports by jstone
[Yesterday at 05:58:09 PM]


Swakane Deer by jstone
[Yesterday at 05:54:43 PM]


Any Luck With Used Dies ? by Rat44
[Yesterday at 05:06:50 PM]


2025 blacktail rut thread by lazydrifter
[Yesterday at 04:48:32 PM]


My Entiat Late tag thread by waoutdoorsman
[Yesterday at 04:26:45 PM]


Open seat thread (waterfowl) by Elk_Guapo
[Yesterday at 04:12:31 PM]


Late huckelberry bull by trophyhunt
[Yesterday at 03:33:35 PM]


Archery Deer late Nachez/Nile Dogs on Deer by Kingofthemountain83
[Yesterday at 03:01:04 PM]


Turkey Summer Sausage by Russ McDonald
[Yesterday at 12:20:20 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal