collapse
For all your AR 500 steel target needs and competitive shooting events! Advertise on Hunting-Washington

Author Topic: GA precision rifles anyone  (Read 4205 times)

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
GA precision rifles anyone
« on: June 17, 2017, 08:51:16 PM »
Been looking at these guys for one of their non typical rifles in 300 win. Also looking at their crusader. Anyone have experience? I've read lots of good things

Offline slm9s

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 195
  • Location: tacoma
Re: GA precision rifles anyone
« Reply #1 on: June 17, 2017, 08:54:41 PM »
Some builders may perhaps be their equal, but IMO no one makes a better rifle.

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4585
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: GA precision rifles anyone
« Reply #2 on: June 17, 2017, 09:25:19 PM »
Buy one! Once you have purchased another custom and another custom and another custom. You will figure it out, components only add up to so much. The rest is to the smith, funny how some claim to be premier builders at 4000.00 for a rifle when Krieger, Hart, Lilja, Pac-Nor and Bartlien have been here way longer and their record of performance is proven and charge less.🙃

Chambering a barrel isn't rocket science. You would be surprised at some of the old school lathes that are used to win world class matches but nobody talks about. 
Embrace the hate.....

Offline Reidus

  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 621
  • Location: Tri-Cities
Re: GA precision rifles anyone
« Reply #3 on: June 17, 2017, 10:12:31 PM »
Buy one! Once you have purchased another custom and another custom and another custom. You will figure it out, components only add up to so much. The rest is to the smith, funny how some claim to be premier builders at 4000.00 for a rifle when Krieger, Hart, Lilja, Pac-Nor and Bartlien have been here way longer and their record of performance is proven and charge less.🙃

Chambering a barrel isn't rocket science. You would be surprised at some of the old school lathes that are used to win world class matches but nobody talks about.
:yeah:

buy all the components you like and have a smith put 'em together.

Offline slm9s

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 195
  • Location: tacoma
Re: GA precision rifles anyone
« Reply #4 on: June 17, 2017, 10:59:25 PM »
Buy one! Once you have purchased another custom and another custom and another custom. You will figure it out, components only add up to so much. The rest is to the smith, funny how some claim to be premier builders at 4000.00 for a rifle when Krieger, Hart, Lilja, Pac-Nor and Bartlien have been here way longer and their record of performance is proven and charge less.🙃

Chambering a barrel isn't rocket science. You would be surprised at some of the old school lathes that are used to win world class matches but nobody talks about.
:yeah:

buy all the components you like and have a smith put 'em together.

That's something GAP does quite well...

Offline 257 Wby Mag

  • Virtual Campfire
  • Trade Count: (0)
  • Sourdough
  • *
  • Join Date: Sep 2007
  • Posts: 1880
  • Location: Chehalis
Re: GA precision rifles anyone
« Reply #5 on: June 17, 2017, 11:24:51 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..
Tod Riechert fan club.

Offline yorketransport

  • Off-Topics
  • Trade Count: (+1)
  • Sourdough
  • *
  • Join Date: Apr 2009
  • Posts: 2121
  • Location: Yelm
Re: GA precision rifles anyone
« Reply #6 on: June 18, 2017, 11:01:57 AM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.


The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.
 

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

Offline b23

  • Virtual Campfire
  • Trade Count: (+1)
  • Sourdough
  • *
  • Join Date: Jan 2010
  • Posts: 1501
  • Location: Spokane Wa.
Re: GA precision rifles anyone
« Reply #7 on: June 18, 2017, 11:32:27 AM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.

The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

There you go again with all that, spot on, reasonable talk.  :tup:

Offline yorketransport

  • Off-Topics
  • Trade Count: (+1)
  • Sourdough
  • *
  • Join Date: Apr 2009
  • Posts: 2121
  • Location: Yelm
Re: GA precision rifles anyone
« Reply #8 on: June 18, 2017, 02:32:38 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.

The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

There you go again with all that, spot on, reasonable talk.  :tup:

You're right, I must be off my game today. I normally condone more irrational and reckless spending! :chuckle:

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #9 on: June 19, 2017, 05:45:20 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.


The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.
 

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

Ya I don't really think of my guns as tools. Almost like a connection with them lol. What about the action and bolt you get from GA? Wouldn't that be impossible to find elsewhere? I know almost nothing when it comes to starting a custom build as I've never had a custom gun. I would like a McMillan stock I think painted by a guy that did one of my other guns for me it turned out really freakin sweet. I just want something that's insanely accurate and I want to get into long range shooting for fun but also a gun to use for elk hunting.

Very nice guns btw Yorke. I really like that snipetec very good looking

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #10 on: June 19, 2017, 05:46:58 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I already have all my out of state tags and I'm not really worried about sharing groups

Offline 257 Wby Mag

  • Virtual Campfire
  • Trade Count: (0)
  • Sourdough
  • *
  • Join Date: Sep 2007
  • Posts: 1880
  • Location: Chehalis
Re: GA precision rifles anyone
« Reply #11 on: June 19, 2017, 05:56:03 PM »
Copy get one then, sure you won't be disappointed. Where ya goin this year? Later
Tod Riechert fan club.

Offline 257 Wby Mag

  • Virtual Campfire
  • Trade Count: (0)
  • Sourdough
  • *
  • Join Date: Sep 2007
  • Posts: 1880
  • Location: Chehalis
Re: GA precision rifles anyone
« Reply #12 on: June 19, 2017, 06:02:55 PM »
Just looked spendy buggers.
Tod Riechert fan club.

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #13 on: June 19, 2017, 06:05:28 PM »
Copy get one then, sure you won't be disappointed. Where ya goin this year? Later

 Idaho Whitetail/Elk and Montana deer. Haven't made up my mind on the Montana tag if I'm going to keep it I might just buy a second Idaho deer tag and send it back in.

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #14 on: June 19, 2017, 06:06:02 PM »
Just looked spendy buggers.

I know why does everything fun and nice have to be expensive AF

Offline Taco280AI

  • Site Sponsor
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jan 2013
  • Posts: 1184
  • Location: In the mountains when able
Re: GA precision rifles anyone
« Reply #15 on: June 19, 2017, 06:11:43 PM »
Plane rentals aren't cheap either... Been doing that lately, but it's fun

Offline 257 Wby Mag

  • Virtual Campfire
  • Trade Count: (0)
  • Sourdough
  • *
  • Join Date: Sep 2007
  • Posts: 1880
  • Location: Chehalis
Re: GA precision rifles anyone
« Reply #16 on: June 19, 2017, 06:14:43 PM »
Dunno where your located but you might wanna check out Jeremy Laier down cosmopalis, he does some cool stuff...
Tod Riechert fan club.

Offline Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 10914
  • Location: Tinker AFB, OK
Re: GA precision rifles anyone
« Reply #17 on: June 19, 2017, 06:25:18 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.


The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.
 

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

Would it be wrong to admit I get all warm inside every time I see these :dunno:

 :chuckle:
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline yorketransport

  • Off-Topics
  • Trade Count: (+1)
  • Sourdough
  • *
  • Join Date: Apr 2009
  • Posts: 2121
  • Location: Yelm
Re: GA precision rifles anyone
« Reply #18 on: June 19, 2017, 10:41:13 PM »
Save some scratch and do it yourself, buy some non res tags with the $$$ you save and go kill some stuff... no one  cares what your groups your gun shoots via  www..... at least I don't... killin is fun..

I seem to remember a thread a while back about this very concept. :chuckle:

I have and appreciate both the full custom jobs done by well known smiths as well as some hacksaw jobs done by local nobodies or myself on the floor of my garage. Whenever I can get away with it I try to avoid paying for aesthetics or a name and focus just on actual performance. I have Savages that I've assembled on the tailgate of my truck  for less than $500 spent on parts that shot .25 MOA when a good barrel was used. I've also owned $4000 custom guns that couldn't crack the .25 MOA mark no matter how hard I tried.

If you think of the gun as just a tool to do a job then I don't know that I'd spend the money on a GA precision. But if you think of it as more than a tool I doubt you'd be disappointed with one. Here's my example:

284 Win Savage Stiker that I built for $750 including the McGowen barrel and the muzzle brake. This is a workhorse gun that gets beat up, shot in the rain and snow, thrown in my pack and rolled in the dirt. It's capable of shooting groups in the .5 MOA range out to around 1000 yards. It's not fancy, I spray painted the stock to cover up some sanding that I did on it, and it's all scratched and nicked up from getting abuse over the last couple of years.

The 338 SnipeTac pistol cost a bit over $4000 in total cost of parts and labor to have Alex Wheeler build the gun and Joel Russo make the bubinga stock for it. This gun is more than just a tool that gets used and abused, it's a display of skilled craftsmanship and attention to detail.

Both serve a very different purpose and I see the high dollar semi customs like a GA Precision as more of a display of skill than offering any practical advantage. You could probably buy a rifle that would perform just as well for 30% of the cost but sometimes that's not the goal. I have to say though, if I could have found a way to slap together a 338 SnipeTac pistol in my garage for $1000 I'd have been all over that!

Ya I don't really think of my guns as tools. Almost like a connection with them lol. What about the action and bolt you get from GA? Wouldn't that be impossible to find elsewhere? I know almost nothing when it comes to starting a custom build as I've never had a custom gun. I would like a McMillan stock I think painted by a guy that did one of my other guns for me it turned out really freakin sweet. I just want something that's insanely accurate and I want to get into long range shooting for fun but also a gun to use for elk hunting.

Very nice guns btw Yorke. I really like that snipetec very good looking

There are a ton of great custom actions out there to build off of. If I were going to build a repeater I'd take a long look at the Mausingfield. What's not to love about a controlled feed action with a Rem 700 foot print and savage barrel threads?

Offline Pnwrider

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2014
  • Posts: 215
  • Location: Snoho
Re: GA precision rifles anyone
« Reply #19 on: June 19, 2017, 11:42:53 PM »
Is resale a factor? If so, I'd go with a gap. Long wait at the moment unless you buy an In stock rifle.


Sent from my iPhone using Tapatalk

Offline rudysts

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Jun 2014
  • Posts: 197
  • Location: Graham
  • Groups: RMEF
Re: GA precision rifles anyone
« Reply #20 on: June 21, 2017, 08:39:49 AM »
If you decide to go custom be sure to order ahead of time. some actions you can buy right away if you go to the right source. a custom inlet stock can take up to 6 months some of the McMillan's up to 4 weeks. then there is the smith, you have to be careful when they tell you 4 to 6 months when they really mean one year. I know several people who this has happened to so it can be frustrating. for me I have been fortunate to never wait that long the longest wait for me was 6 weeks my last build was a Rem action that needed a new barrel that was previously blueprinted it took 3 weeks including shipping to and from Texas from a very reputable smith who does a lot of bench rest work. I am not sure what Alex Wheeler's lead time is but he is from the bench rest world who applies those techniques to even his hunting rifle builds,Yorke could chime in on his lead time he is one of the best smiths out there he would be a good option for a smith. https://www.wheeleraccuracy.com/services-

Bottom line if you are going to spend that kind of money on your first custom you may as well go to one of the best smith in the country. the wait will be worth it. another option is Ryan Pierce http://www.piercisionrifles.com/ he has built a rifle for me and it only took 6 weeks with all the parts in hand. for my next build I think I may consider  Emil Kovan http://www.matchrifles.com/about.html

Good luck

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #21 on: August 02, 2017, 11:43:11 AM »
Bump... really been thinking hard on pulling the trigger lately. Anyone have experience with manners carbon stock vs McMillan hunters edge?

Offline Magnum_Willys

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 2452
Re: GA precision rifles anyone
« Reply #22 on: August 03, 2017, 12:14:33 AM »
Bump... really been thinking hard on pulling the trigger lately. Anyone have experience with manners carbon stock vs McMillan hunters edge?
Toss up.  Manners will ship sample out to you,   I went manners eh1 but could of gone mcmillan a3.  Both great stocks.   
Figure 9 mo lead time. Stocks are running 6 mo as are some barrels and a tions. Hydrodip is 6 weeks lead time.  Add it all up = 9 mo.

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #23 on: August 03, 2017, 12:48:15 AM »
Bump... really been thinking hard on pulling the trigger lately. Anyone have experience with manners carbon stock vs McMillan hunters edge?
Toss up.  Manners will ship sample out to you,   I went manners eh1 but could of gone mcmillan a3.  Both great stocks.   
Figure 9 mo lead time. Stocks are running 6 mo as are some barrels and a tions. Hydrodip is 6 weeks lead time.  Add it all up = 9 mo.

Roger. What do you think about the hunters edge from McMillan? That a3 looks like it would be nice to shoot and so does the eh1.

Do you have a GAP magnumwillys?

Offline Magnum_Willys

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 2452
Re: GA precision rifles anyone
« Reply #24 on: August 03, 2017, 05:35:18 AM »
Dont have one . i think their actions are rebranded defiance ones - the best.
I like stocks with no drop at the top of buttplate so you can shoot prone and have a tall butt plate to soak up recoil.  Hunters edge fits that.  I like it .  Be my choice for an all around stock.   Would bump up to a 1" pad if shooting magnums.

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #25 on: August 03, 2017, 10:23:00 AM »
Dont have one . i think their actions are rebranded defiance ones - the best.
I like stocks with no drop at the top of buttplate so you can shoot prone and have a tall butt plate to soak up recoil.  Hunters edge fits that.  I like it .  Be my choice for an all around stock.   Would bump up to a 1" pad if shooting magnums.

What do you think about the rail options on an action? They have a screw on type on the Templar action but also one that is machined with it.

Offline Magnum_Willys

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 2452
Re: GA precision rifles anyone
« Reply #26 on: August 03, 2017, 08:35:52 PM »
I really like the machined in tho from a practical standpoint with pins and #8 screws  it wont matter. I went stiller with screwed in base vs deviant with machined base cuz it was $400 cheaper and available now instead  of 9 mo lead time.   

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #27 on: December 31, 2017, 08:09:12 PM »
Well should be here in about 4 months at the earliest and 8 months at the latest  :IBCOOL:

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4585
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: GA precision rifles anyone
« Reply #28 on: December 31, 2017, 08:31:24 PM »
GA is the PRIMIER rifle builder, with a non-disputable track record. You can't go wrong with a Non-Typical.
« Last Edit: January 01, 2018, 03:21:30 AM by Biggerhammer »
Embrace the hate.....

Offline mountainman

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Mar 2007
  • Posts: 2848
  • Location: Wenatchee, Wa
Re: GA precision rifles anyone
« Reply #29 on: December 31, 2017, 08:40:32 PM »
Well should be here in about 4 months at the earliest and 8 months at the latest  :IBCOOL:
awesome! You won't be disappointed!
That Sword is more important than the Shield!

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4585
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: GA precision rifles anyone
« Reply #30 on: December 31, 2017, 08:59:59 PM »
George (Owner of GA) is a world class shooter. Proven time and time agian in real world competition. Far above and beyond the self proclaimed  "Local legend" status. Today was a good day. 1st of the year and all the crap is in the past😊😊😊😊😊😊.! Trump is president and the crap bag Seachickens screwed themseleves out of the playoff's.

Couldn't ask for a better new year!!!👍👍👍👍
Embrace the hate.....

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #31 on: December 31, 2017, 09:09:15 PM »
GA is the PRIMIER rifle builder, with a non-disputable track record. You can't go wrong with a Non-Typical.

Hell... The the biggest, sell out, low budget salesmen for the so called "Other" primier rifle builder just took a extended vacation.

Lol who is the other premier builder? But thanks man I'm super stoked. Went with the Templar V2 hunter action, manners EH6A stock in molded elite swamp, Timney Calvin elite trigger 1.5 pounds, cerakoted black, 24 inch barrel 7mm Rem mag. Sounded good to me

I had a chance to handle the EH1, EH3, and EH6 and the EH6 felt the best in my hands with the palm swell and I wanted to option for the adjustable cheek.

I actually ordered in early November but was hesitant to post because people saying should have gone with this guy or this guy or overpriced blah blah but when I called around they were super competitive on pricing and I added all the parts up to buy myself and it wasn't to far off what they wanted!

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4585
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: GA precision rifles anyone
« Reply #32 on: December 31, 2017, 09:14:25 PM »
GA is the PRIMIER rifle builder, with a non-disputable track record. You can't go wrong with a Non-Typical.

Hell... The the biggest, sell out, low budget salesmen for the so called "Other" primier rifle builder just took a extended vacation.

Lol who is the other premier builder? But thanks man I'm super stoked. Went with the Templar V2 hunter action, manners EH6A stock in molded elite swamp, Timney Calvin elite trigger 1.5 pounds, cerakoted black, 24 inch barrel 7mm Rem mag. Sounded good to me

I had a chance to handle the EH1, EH3, and EH6 and the EH6 felt the best in my hands with the palm swell and I wanted to option for the adjustable cheek.

I actually ordered in early November but was hesitant to post because people saying should have gone with this guy or this guy or overpriced blah blah but when I called around they were super competitive on pricing and I added all the parts up to buy myself and it wasn't to far off what they wanted!

Great stock. I prefer the lighter Jewell trigger and if your chambering in 7mm Mag on a custom rig. Why the 24"? 2-4" inches more on a barrel makes no difference in the set up, other than Performance.

Your already in a middle class weight rig, people over rate weight. 2-4" more inches on the barrel means what? The weight of change in your pocket? The weight of half or less of the 16oz water bottle you drank?

Guess it goes back to those who have been there and done that.
« Last Edit: December 31, 2017, 09:24:03 PM by Biggerhammer »
Embrace the hate.....

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #33 on: December 31, 2017, 10:42:38 PM »
GA is the PRIMIER rifle builder, with a non-disputable track record. You can't go wrong with a Non-Typical.

Hell... The the biggest, sell out, low budget salesmen for the so called "Other" primier rifle builder just took a extended vacation.

Lol who is the other premier builder? But thanks man I'm super stoked. Went with the Templar V2 hunter action, manners EH6A stock in molded elite swamp, Timney Calvin elite trigger 1.5 pounds, cerakoted black, 24 inch barrel 7mm Rem mag. Sounded good to me

I had a chance to handle the EH1, EH3, and EH6 and the EH6 felt the best in my hands with the palm swell and I wanted to option for the adjustable cheek.

I actually ordered in early November but was hesitant to post because people saying should have gone with this guy or this guy or overpriced blah blah but when I called around they were super competitive on pricing and I added all the parts up to buy myself and it wasn't to far off what they wanted!

Great stock. I prefer the lighter Jewell trigger and if your chambering in 7mm Mag on a custom rig. Why the 24"? 2-4" inches more on a barrel makes no difference in the set up, other than Performance.

Your already in a middle class weight rig, people over rate weight. 2-4" more inches on the barrel means what? The weight of change in your pocket? The weight of half or less of the 16oz water bottle you drank?

Guess it goes back to those who have been there and done that.

I can change the length of barrel still on the build that's kind of why I posted about it, I really don't like long barrels though so to me 24 inches was about as long as I would like but I might need to rethink it?

I went with the Timney CE because the guys at GA suggested for a pure hunting rig it's not as sensitive to dirt and failures as the jewel. My buddy has a jewel though and he's had zero problems but he mostly road hunts for health reasons.
« Last Edit: January 01, 2018, 02:15:28 AM by Duckslayer89 »

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4585
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: GA precision rifles anyone
« Reply #34 on: January 01, 2018, 03:20:42 AM »
Your correct about the Jewell, having to keep them clean. As for barrel length, if you prefer a shorter barrel. Today's powder choices should cover you.
Embrace the hate.....

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #35 on: January 01, 2018, 03:33:12 AM »
Your correct about the Jewell, having to keep them clean. As for barrel length, if you prefer a shorter barrel. Today's powder choices should cover you.

Roger! That Calvin elite is suppose to be bad ass. I love my Timney at 2.5 on my ruger and the guy at GA said he has the Calvin elite at 1.5 on his gun so I'm trusting them. If I don't like it I'll change it out to the jewel for sure. I've heard the shorter stiffer barrels are more accurate? Not sure if that would matter at 24 vs 26 inch barrel.

Offline Magnum_Willys

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 2452
Re: GA precision rifles anyone
« Reply #36 on: January 01, 2018, 08:23:11 AM »
If you start reloading and/or target shooting as a hobby you always want more performance = longer, and gives more flexibility to speed up or soften loads for tuning without going too slow,  but if you can avoid that reloading addiction 24" is handy.

You can always shorten it but you can't make it longer.........

http://www.thefirearmblog.com/blog/2015/04/09/7mm-remington-magnum-velocity-versus-barrel-length/

Offline BULLBLASTER

  • Chris McCarthy
  • Virtual Campfire
  • Trade Count: (+10)
  • Old Salt
  • *
  • Join Date: Oct 2008
  • Posts: 5837
  • Volleyfire brigade
Re: GA precision rifles anyone
« Reply #37 on: January 01, 2018, 10:13:17 AM »
I agree with the comments to go with a 26 inch barrel. I havenít ever felt like the barrel held me up in any way while hunting. I have a 300 win with a 28.5 inch barrel or including the brake.

I also like the manners stocks. I have a eh1 in swamp color and ordered another for my next build too.

 :tup:
Any idea what bullets you will shoot?

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #38 on: January 03, 2018, 01:55:40 PM »
@bullblaster I want to shoot the Berger 180 hunting VLD or the ELD-X. I really like accubond performance on game to but I want to try the bergers after hearing all the reviews. Do you guys believe in the shorter barrel=better accuracy theory?

Offline BULLBLASTER

  • Chris McCarthy
  • Virtual Campfire
  • Trade Count: (+10)
  • Old Salt
  • *
  • Join Date: Oct 2008
  • Posts: 5837
  • Volleyfire brigade
Re: GA precision rifles anyone
« Reply #39 on: January 03, 2018, 02:05:07 PM »
Accuracy isnít a product of barrel length. This is the first custom I have had but I canít imagine it getting much better with a shorter barrel. Just less velocity.
Iíve shot some tiny groups with my 28.5 inch barreled 300. It is always under 1/2 moa and often much smaller.


This pic is 5 rounds and a fouler. The one out of the group was a clean bore then the group. This is probably the smallest group I have shot and sue isnít the norm but like I said with this set up I expect 1/2 moa when I line up and shoot at 100 and 200 yards

Offline BULLBLASTER

  • Chris McCarthy
  • Virtual Campfire
  • Trade Count: (+10)
  • Old Salt
  • *
  • Join Date: Oct 2008
  • Posts: 5837
  • Volleyfire brigade
Re: GA precision rifles anyone
« Reply #40 on: January 03, 2018, 02:08:06 PM »
I like both the Berger bullets and eld x. In my experience they perform very similar on game

Offline Duckslayer89

  • Off-Topics
  • Trade Count: (+1)
  • Frontiersman
  • *
  • Join Date: Oct 2014
  • Posts: 2698
  • Location: Orting
Re: GA precision rifles anyone
« Reply #41 on: January 03, 2018, 02:52:25 PM »
I like both the Berger bullets and eld x. In my experience they perform very similar on game

That's a nice group man. Hope my gun shoots like that. I like the accubonds but it just seems like the punch threw with my 308 and animals run pretty far. Maybe the 308 just doesn't have the knock down power of the bigger magnums

Offline BULLBLASTER

  • Chris McCarthy
  • Virtual Campfire
  • Trade Count: (+10)
  • Old Salt
  • *
  • Join Date: Oct 2008
  • Posts: 5837
  • Volleyfire brigade
Re: GA precision rifles anyone
« Reply #42 on: January 03, 2018, 02:56:40 PM »
I like accubonds a lot also, they hit hard and penetrate deep.
The Berger and eld x will shed a good bit more weight than the accubonds and dump more energy into the animal.
Iíd be confident using any of the 3 to the ranges I hunt at

Offline jackelope

  • Administrator
  • Trade Count: (+21)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 35923
  • Location: Duvall, WA
  • Groups: WSB RMGA NRA RMEF BHA
Re: GA precision rifles anyone
« Reply #43 on: January 03, 2018, 03:28:41 PM »
I can vouch for .300wm 180 grain Accubond performance on mountain goat sized animals!!
I had bergers and accubonds to choose from and went with the AB's. I guess I like the weight retention thing and I didn't plan on shooting at extended ranges.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

 

* Recent Topics

Wyoming antelope questions by Eric M
[Today at 05:09:18 PM]


high dollar cast iron by DoubleJ
[Today at 05:09:18 PM]


Whitetail European (The Shed Taxidermy Studio) by Ballance1
[Today at 05:09:04 PM]


Delete by 7mmlong
[Today at 05:08:12 PM]


Cougar Chills by bigmacc
[Today at 05:05:54 PM]


WTS. T/C ENCORE Stainless Frame only by 7mmlong
[Today at 05:05:01 PM]


Magpul Pro Rem700 Chassis. by huntandjeep
[Today at 04:56:20 PM]


New Sponsor, Elk Hunt Consulting by jackelope
[Today at 04:55:08 PM]


Some T-Shirts I thought this group might find funny... by Widgeondeke
[Today at 04:53:24 PM]


First coyote with my 204 Ruger by MHWASH
[Today at 04:47:23 PM]


Recurve tips by n_mathews13
[Today at 04:44:37 PM]


For Sale: Franchi Affinity Compact 12 gauge Max 5 26 inch barrel by bod
[Today at 04:35:20 PM]


Bacon cure? by Woodchuck
[Today at 04:27:30 PM]


feeding stations by huntnfmly
[Today at 04:16:06 PM]


WDFW Steelhead meeting Tonight 1/16 by Special T
[Today at 04:15:35 PM]


Heads up, Incoming BAD legislation, rattle the cages POLITELY in Olympia by Special T
[Today at 04:04:19 PM]


Big blacktail?? by jackmaster
[Today at 03:54:27 PM]


FS Savage/Stevens 200 30-06 200$ by kukusya
[Today at 03:43:12 PM]


WTS: Kifaru Mountain Rambler by davk
[Today at 03:33:55 PM]


F/S Deer horn lamp by Jermshooter
[Today at 03:32:57 PM]