collapse

Author Topic: Round Ball accuracy?  (Read 457 times)

Offline JasonG

  • Virtual Campfire
  • Trade Count: (0)
  • Hunter
  • *
  • Join Date: Aug 2009
  • Posts: 178
  • Location: Issaquah Wa
Round Ball accuracy?
« on: November 08, 2017, 05:03:57 PM »
Just Curious, what kinda accuracy would I expect from a round ball at say , 50 yards? Im shooting a lyman trade rifle 54 cal. Im also wondering how many shots should I take before cleaning? Sorry just trying to get this figured out. Thanks Jason

Offline Dan-o

  • Site Sponsor
  • Trade Count: (+5)
  • Old Salt
  • *****
  • Join Date: Jul 2010
  • Posts: 8261
Re: Round Ball accuracy?
« Reply #1 on: November 08, 2017, 05:37:03 PM »
Do you know thee twist rate of your rifling?


Some barrels are rifled for round balls.... some for conicals... etc.   

For accuracy, you really want to shoot what the barrel was designed for. 
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Harleysboss

  • Trade Count: (+1)
  • Pilgrim
  • *
  • Join Date: Nov 2013
  • Posts: 37
  • Location: western wa
  • Groups: RMEF
Re: Round Ball accuracy?
« Reply #2 on: November 08, 2017, 05:39:53 PM »
I had your exact rifle. 50yds with good eyesight. should be small groups, like almost one large hole groups. I installed a peep sight on mine at the time and the groups really shrunk. 90 grns GoexFFG , .530 ball and a .018 prelubed patch. Off the bench accuracy should be excellent. Off Hand, well thats up to the shooter. Great gun you got there.

Offline JasonG

  • Virtual Campfire
  • Trade Count: (0)
  • Hunter
  • *
  • Join Date: Aug 2009
  • Posts: 178
  • Location: Issaquah Wa
Re: Round Ball accuracy?
« Reply #3 on: November 08, 2017, 05:48:39 PM »
Do you know thee twist rate of your rifling?


Some barrels are rifled for round balls.... some for conicals... etc.   

For accuracy, you really want to shoot what the barrel was designed for.
1-48

Offline JasonG

  • Virtual Campfire
  • Trade Count: (0)
  • Hunter
  • *
  • Join Date: Aug 2009
  • Posts: 178
  • Location: Issaquah Wa
Re: Round Ball accuracy?
« Reply #4 on: November 08, 2017, 05:52:14 PM »
I had your exact rifle. 50yds with good eyesight. should be small groups, like almost one large hole groups. I installed a peep sight on mine at the time and the groups really shrunk. 90 grns GoexFFG , .530 ball and a .018 prelubed patch. Off the bench accuracy should be excellent. Off Hand, well thats up to the shooter. Great gun you got there.
Did you mostly shoot round ball? What other options worked well. Im shooting .530 with .015 lubed patches , ffg. Im wondering if the patches need to be .018?

Offline jaymark6655

  • Off-Topics
  • Trade Count: (0)
  • Sourdough
  • *
  • Join Date: Aug 2009
  • Posts: 1671
  • Location: Bedford, IN
Re: Round Ball accuracy?
« Reply #5 on: November 09, 2017, 04:38:25 AM »
Round ball out of a 1-48 should be around .5" at 50 and 1.5" at 100 if its anything like my .50 cal.  I try to clean every 3 shoots or it gets too hard to load. I heard the maxi-hunters work well and have bought some, but have not tried them.
"That's the reason we pay $25 for a recoil lug made by a professional instead of one for $0.50 made by Micheal J Fox using a dremel!"

"Women should be treated the same as a French Rifle, dropped at the first sign of trouble."

Offline Harleysboss

  • Trade Count: (+1)
  • Pilgrim
  • *
  • Join Date: Nov 2013
  • Posts: 37
  • Location: western wa
  • Groups: RMEF
Re: Round Ball accuracy?
« Reply #6 on: November 09, 2017, 06:01:09 AM »
Believe it or no, I shot some sabots outta mine and they shot pretty good, My rifle seemed to have just a slightly over sized bore so conical fit was not great for me so the accuracy was not there. MMP Sabots sell a 54x50 purple sabot for the 54 cal. It takes a 50 cal bullet, like .499-.500. mine shot best at 100grn FFG Goex BP. I'm a shoot and swab guy. Meaning shoot once, then damp patch with windex , followed up by a dry patch once down and out flip the patch and down and back out. Keeps the bore very similar shot to shot. I did this with round ball shooting also. Probably a must if you try the sabot route. I shot a bullet that I bought from Midway USA rainer copper plated lead HP .500 335grns, cheap bullet but could easily be used as a hunting bullet. They really shoot great outta my Knight MK85 inline 54cal. I ordered my sabots right from MMP they have a website. Pretty cheap. There is a 300 grn 50 cal bullet I think by Hornady. Its pointed and looks similar to the SST that they sell for muzzy loaders. That would probably shoot good in a sabot and 1-48 twist. The twist dictates what will stabilize. 1-48 you have to keep the over all length and that means weight of your bullet on the short stubby side. 300grns will be shorter than lets say 350 grns and so on. Good luck. Keep on asking questions. One last thing, with round ball shooting, find your spent patches and look them over. If you see burn holes or excessive tearing then you need a thicker patch. Mine burnt holes with the .015 patch but that went away with the .018 size. Would think it matters that much but it does. .020 would load but it was very tight to push down the bore.

Offline MountainDevil54

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Aug 2012
  • Posts: 463
Re: Round Ball accuracy?
« Reply #7 on: November 09, 2017, 04:04:03 PM »
Accuracy depends on a lot of factors and the #1 factor is the shooter. I get mad when I go to the range and a friend shoots a 2" group with MY rifle. But guess what, they don't shoot all of the time, they don't know the sights, the loading pressure, the trigger pull. A ton of issues come into play with accuracy.

I would like to keep it at least 1" or less at 50, but again, if your sights are not comfortable to shoot with, its going to limit your accuracy.

Offline JasonG

  • Virtual Campfire
  • Trade Count: (0)
  • Hunter
  • *
  • Join Date: Aug 2009
  • Posts: 178
  • Location: Issaquah Wa
Re: Round Ball accuracy?
« Reply #8 on: November 09, 2017, 07:21:17 PM »
Thank you guys for all the info!! I really appeciate it!  Jason

Offline JasonG

  • Virtual Campfire
  • Trade Count: (0)
  • Hunter
  • *
  • Join Date: Aug 2009
  • Posts: 178
  • Location: Issaquah Wa
Re: Round Ball accuracy?
« Reply #9 on: November 10, 2017, 08:01:05 AM »
Do most people shoot and clean every other shot?

Offline Jim/WA

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Oct 2013
  • Posts: 32
  • Location: Vancouver
Re: Round Ball accuracy?
« Reply #10 on: November 13, 2017, 06:52:37 AM »
I'm getting fist size groups at 75yds which is more or less my effective range for elk. My elk gun is a 54 cal flintlock loaded with 110gr 2F and a .530 prb. I run a brush down the bore followed by a lightly lubed patch after every shot.

 

* Recent Topics

Bullwinkle by Romulus1297
[Today at 12:07:59 AM]


Salmon fishing/Not likley by hunthard
[Today at 12:03:25 AM]


Blacktail Second Estrus by TriggerMike
[Yesterday at 11:24:52 PM]


Can anyone help me identify what animal makes this sound? by KFhunter
[Yesterday at 11:22:44 PM]


Didnt check this cam for two months by greenhead_killer
[Yesterday at 11:00:34 PM]


Christmas Trees Maple Valley by tmike
[Yesterday at 10:57:13 PM]


Done with Nikon by wastickslinger
[Yesterday at 10:43:21 PM]


Backcountry with kiddos by Jpmiller
[Yesterday at 10:28:56 PM]


Body of missing woman found mauled by mountain lion, coroner says by KFhunter
[Yesterday at 10:20:08 PM]


FS: X-Caliber SS AR10 .308 barrel, 18", 10 twist, fluted. by Biggerhammer
[Yesterday at 10:14:03 PM]


6.5-284 Norma!! by JimmyHoffa
[Yesterday at 10:06:38 PM]


Just your Typical Muley by N7XW
[Yesterday at 10:06:05 PM]


Do you Kombucha? by KFhunter
[Yesterday at 10:05:53 PM]


Smoking cheese tomorrow. Any last minute tips? by KFhunter
[Yesterday at 10:00:57 PM]


BC Moose Hunt by steeleywhopper
[Yesterday at 09:57:35 PM]


GLUTEN FREE COOKING by Chase2008
[Yesterday at 09:57:11 PM]


The Guy Made $84K fishing in 5 months by WAcoueshunter
[Yesterday at 09:46:14 PM]


Idaho fighting order to destroy wilderness wolf, elk data by wolfbait
[Yesterday at 09:41:01 PM]


Fullcurl by nalley112
[Yesterday at 09:34:16 PM]


Skyline Kicker by quadrafire
[Yesterday at 09:26:34 PM]