collapse
For when you only get one shot! FREE SHIPPING ON ORDERS OVER $99.00!

Poll

Do you do your own gunsmithing?

No, I just clean
Yes, but just light sanding and polishing replacing store bought parts
Yes, I cut, grind, file the shebang

Author Topic: Do you do your own gun smithing Poll?  (Read 1294 times)

Offline Special T

  • Truth the new Hate Speech.
  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • *
  • Join Date: Aug 2009
  • Posts: 18508
  • Location: Skagit Valley
  • Wake me when you need me.
    • Silver Arrow Bowmen
Do you do your own gun smithing Poll?
« on: November 10, 2017, 12:42:37 PM »
The comments about the perceived bad trigger on the savage axis thread got me thinking about this. I started of with a local Smith who has treated me right. Did a nice trigger job on my rem 700. The trigger on my 10-22 was kind of nasty but I didn't want to spend that kind of coin on a trigger job and thought it was kind of silly to buy a new one. So I hopped on you tube and there was several great DIY projects for the 10-22. That got me hooked. $40 in supplies, small files and sandpaper, and I'm hooked. I'm not sure I would by an upgrade for any component again that can be greatly improved by a little sanding and polishing. Nearly every family rifle has had a deep cleaning and some level of sanding and polishing. I've been amazed at how they now feel, and how much better I understand my firearms.

How about you guys?
The Truth is like Poetry, and most people hate Poetry

Offline Scheindogg

  • Off-Topics
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: Mar 2017
  • Posts: 546
  • Location: Redmond
Re: Do you do your own gun smithing Poll?
« Reply #1 on: November 10, 2017, 12:46:35 PM »
You should add an option for anyone who doesn't do anything, not even clean.
I am very new to firearms and have yet to clean one and when it needs to be done I will take it to wades to get it cleaned until I'm comfortable cleaning it correctly myself
I can do all things through Christ who strengthens me -Phillipians 4:13

Offline Evil_EdwardO

  • Virtual Campfire
  • Trade Count: (0)
  • Longhunter
  • *
  • Join Date: Oct 2012
  • Posts: 655
  • Location: Albion, WA
  • Groups: NRA, LPC, ASF
Re: Do you do your own gun smithing Poll?
« Reply #2 on: November 10, 2017, 12:59:50 PM »
I've done few trigger jobs. I started on Youtube and watched the videos for the 10/22. Took the trigger from 8lbs to 4lbs. After that I was hooked. From there I proceeded to take a part every gun I own to at least give them a polish.

Offline Special T

  • Truth the new Hate Speech.
  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • *
  • Join Date: Aug 2009
  • Posts: 18508
  • Location: Skagit Valley
  • Wake me when you need me.
    • Silver Arrow Bowmen
Re: Do you do your own gun smithing Poll?
« Reply #3 on: November 10, 2017, 01:05:26 PM »
You should add an option for anyone who doesn't do anything, not even clean.
I am very new to firearms and have yet to clean one and when it needs to be done I will take it to wades to get it cleaned until I'm comfortable cleaning it correctly myself
YouTube  is amazing for most weapons, especially any common ones. I would bet if you watched a couple not only would you feel good about cleaning your own gun, but   would have a much better understanding how everything works.

Sent from my SAMSUNG-SM-G930A using Tapatalk

The Truth is like Poetry, and most people hate Poetry

Offline Stein

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Sep 2013
  • Posts: 3287
Re: Do you do your own gun smithing Poll?
« Reply #4 on: November 10, 2017, 01:22:58 PM »
So far, I have done everything myself but it has been limited in scope.  I haven't done anything that requires a mill or the like.

Offline CP

  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 4551
  • Location: Everett
Re: Do you do your own gun smithing Poll?
« Reply #5 on: November 10, 2017, 03:08:19 PM »
I don't muck with the mechanisms much anymore but I mount my own scopes/sights - modify stocks - just repaired a cracked ML stock - sometimes add a piece of rail or two to hang accessories off of.

I changed the barrel on this guy, added the rail, the thread adapter - got a flashlight and laser for it somewhere  - I might do a trigger job on it if I get the urge.


Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1425
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: Do you do your own gun smithing Poll?
« Reply #6 on: November 10, 2017, 03:36:50 PM »
Held an FFL for 20 years on the basis of accurizing firearms.

Online runamuk

  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Jan 2008
  • Posts: 17702
  • Location: Dayton or somewhere in the Blues.
  • "I'm bored play with me"
Re: Do you do your own gun smithing Poll?
« Reply #7 on: November 10, 2017, 03:45:37 PM »
I have floated barrels, lapped varrels, have done a new trigger. I can tear down most my guns. I built an AR from a Mish mash of components. My most recent scope install and sight in, I cheat I know a guy I send him a text after a couple shots on paper, he dials me in. We did it in 6 shots.  Dude takes some if the fun out of a trip to the range :chuckle:

I also briefly shacked up with a gun smith a few years back, so picked up some stuff. 

I also have done reloading but haven't had a place to it the last couple years.

I miss tinkering on my guns I intend to change that this winter.
Sent from a fairy ring

benchleg

Online JimmyHoffa

  • Virtual Campfire
  • Trade Count: (+2)
  • Explorer
  • *
  • Join Date: Sep 2010
  • Posts: 10193
  • Location: 150 Years Too Late
Re: Do you do your own gun smithing Poll?
« Reply #8 on: November 10, 2017, 08:24:03 PM »
everything that doesn't require machine tools, only because I don't have machine tools or three phase 240 to run them even if I had them.

Offline HawkCreek

  • Virtual Campfire
  • Trade Count: (0)
  • Scout
  • *
  • Join Date: Mar 2013
  • Posts: 428
  • Location: Grant, Lincoln and Douglas
Re: Do you do your own gun smithing Poll?
« Reply #9 on: November 10, 2017, 08:41:52 PM »
everything that doesn't require machine tools, only because I don't have machine tools or three phase 240 to run them even if I had them.

^Ya pretty much this.

This was my last project. Mostly stock work but I had to drill and tap the pic rail section for the updated sling stud. It was blued after the bedding set up.


Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4899
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Do you do your own gun smithing Poll?
« Reply #10 on: November 10, 2017, 09:36:19 PM »
YouTube is amazing. I'm no mechanic!! I dropped the transfer case out of my 2500HD and completely rebuilt it myself with a cell phone in one hand with YouTube videos. You can find it all on there when it comes to rifle tweaks, bedding, up grades etc.
Embrace the hate.

A man with experience is not at the mercy of a man with an opinion.

Offline WapitiTalk1

  • Site Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 3212
  • Location: NW Washington
Re: Do you do your own gun smithing Poll?
« Reply #11 on: November 10, 2017, 09:48:01 PM »
Working on it ;).  Nothing over the top yet but working on it. This is Mrs Wapitis new rifle, Browning AB3 Hunter. I ended up correctly putting on/bore sighting the scope after the local box store jacked it up. Does that count?

Darton Archery Maverick II
"Sir, left side Sir!" "Are you sure Private Pyle?"
Elknut Field Staff

Offline Biggerhammer

  • Off-Topics
  • Trade Count: (0)
  • Frontiersman
  • *
  • Join Date: Jun 2011
  • Posts: 4899
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Do you do your own gun smithing Poll?
« Reply #12 on: November 10, 2017, 10:45:14 PM »
Only if you lapped the rings.👍
Embrace the hate.

A man with experience is not at the mercy of a man with an opinion.

Offline wadu1

  • Grumpy
  • Virtual Campfire
  • Trade Count: (+2)
  • Frontiersman
  • *
  • Join Date: Sep 2008
  • Posts: 2866
  • Location: Tacoma
  • RMEF, DU, NRA, PFE
Re: Do you do your own gun smithing Poll?
« Reply #13 on: November 10, 2017, 10:49:05 PM »
I have floated barrels, lapped varrels, have done a new trigger, like Run said. But on shotguns I've done firing pin replacement, lift gates on auto's, ejector work on O/U's manufactured odds and end parts for them as well. 
"a fronte praecipitium a tergo lupi"

Offline yorketransport

  • Business Sponsor
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Apr 2009
  • Posts: 2476
  • Location: Yelm
  • I'm sorry, it's my fault I'll try harder next time
    • https://www.facebook.com/scapegoatenterprises/
    • Scapegoat Enterprises
Re: Do you do your own gun smithing Poll?
« Reply #14 on: November 11, 2017, 07:51:31 AM »
Iíve done some unspeakable things to firearms over the years. My favorite tools are a dremel, the wrong sized screwdriver and a 3# mallet.  :chuckle:

Iíve hand reamered a bunch of barrels, done trigger jobs, inlet and bed rifle stocks, shortened barrels with a hacksaw then re crowned them by hand, drilled and tapped actions for scope mounts, blued barrels, modified feed rails, I can install a Savage prefit barrel faster than most people can tie heir shoes, and just about anything else that can be done without a mill or lathe. Iíve reached a point now where I need to just buy a lathe and be done with it.
Scapegoat Enterprises Custom Shirts and Decals

 

* Recent Topics

FS Duck Hunting Kayak plus decoys by asmith
[Today at 07:07:38 PM]


Trying to walk it off. by PastorJoel
[Today at 07:07:02 PM]


Dog Food by runamuk
[Today at 07:03:26 PM]


China illegal fishing salmon by trophyelk6x6
[Today at 07:02:16 PM]


Gunna make the .284(7mm) Hammer Hunter 177grains GO FAST! by rbros
[Today at 06:53:24 PM]


WTS Stone Glacier Evo Frame w/ Sky 5900 bag and accessories by TriggerMike
[Today at 06:50:53 PM]


Teanaway Coyote by cdriver
[Today at 06:46:29 PM]


2011 Palomino Puma Trailer for sale by Wanderer
[Today at 06:39:03 PM]


12 or 20 gauge for Wild birds by 87Ford
[Today at 06:33:58 PM]


Teanaway quality tag by wheels
[Today at 06:33:25 PM]


22-250 scope by Bofire
[Today at 06:29:39 PM]


Drew bumping river goat tag by Limhangerslayer
[Today at 06:23:29 PM]


Arrows, stabilizer and quiver for sale by fishngamereaper
[Today at 06:19:40 PM]


Drew unit 224 Quality by bowhunterforever
[Today at 06:13:39 PM]


Some Blacktails & Coyote by bowhunterforever
[Today at 06:10:53 PM]


Diamond M Ranch said open cow rate has risen since wolf migrationÖ by nwwanderer
[Today at 06:10:15 PM]


Laser eyes by bowhunterforever
[Today at 06:10:06 PM]


Good growth by Killmore
[Today at 05:57:34 PM]


For Sale- Summer BBQ Pork by Whitpirate
[Today at 05:55:51 PM]


Idaho results by carpsniperg2
[Today at 05:43:30 PM]