collapse

Advertisement


Author Topic: Gunsmith pricing???  (Read 1324 times)

Offline kukusya

  • Political & Covid-19 Topics
  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Nov 2014
  • Posts: 258
  • Location: Pierce Co, Washington
Gunsmith pricing???
« on: April 27, 2015, 08:15:07 AM »
What average price for installing iron sights on bolt rifle? job + parts
Thank you

Offline Woodhunter

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Jan 2014
  • Posts: 168
  • Location: Port Angeles
Re: Gunsmith pricing???
« Reply #1 on: April 27, 2015, 08:39:19 AM »
What average price for installing iron sights on bolt rifle? job + parts
Thank you

Open end question, you need to be more specific as to what type of sights.

The band type ramp, sight blade and hood in the photo cost more than $150 not including labor to install.   Silver soldered on, not an easy task, then requires a bluing job.        Installing a simple screw on ramp will not be as complex.      Rear sight depends on what you want also.   A good rear island type sight will be $150 or more.   Labor cost depends on the individual shop rates.   Installing high end sights may run $200 or more for the labor.  Less for simple sights.   

So you need to define what you want, then contact a shop with the capabilities to install.   








Not all shops have the equipment to "do it right".







No, I do not do gun work for hire.   Photos are of my personal guns.

BigHammer says:   "Bust out your wallet, it may rain Savages all day for 399.00 but when it comes to classy wood and quality stock work. You pay to play!"


I will add my thoughts:


"High Quality Metal Work On Guns Ain't Cheap"
« Last Edit: April 27, 2015, 08:57:11 AM by Woodhunter »

Offline kukusya

  • Political & Covid-19 Topics
  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Nov 2014
  • Posts: 258
  • Location: Pierce Co, Washington
Re: Gunsmith pricing???
« Reply #2 on: April 27, 2015, 09:31:27 AM »
Beautiful rifles  :tup:

Offline JimmyHoffa

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 14351
  • Location: 150 Years Too Late
Re: Gunsmith pricing???
« Reply #3 on: April 27, 2015, 09:37:29 AM »
I would think you could get a front sight drill/tap for $50-60 plus $25 front sight, then if the bolt gun has a standard pre-drilled receiver you could mount a peep on the receiver yourself for about $75.  If you have them drill the barrel for a rear sight, might be another $50.  Lots of sights to choose from.

Offline Woodhunter

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Jan 2014
  • Posts: 168
  • Location: Port Angeles
Re: Gunsmith pricing???
« Reply #4 on: April 27, 2015, 09:54:45 AM »
I would think you could get a front sight drill/tap for $50-60 plus $25 front sight, then if the bolt gun has a standard pre-drilled receiver you could mount a peep on the receiver yourself for about $75.  If you have them drill the barrel for a rear sight, might be another $50.  Lots of sights to choose from.

Correct this is why I stated the job needs to be defined.   Screw on sights are much cheaper to install than the barrel bands.

Lots of gun smiths in the Puget Sound area, do a little research.

Offline Woodhunter

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Jan 2014
  • Posts: 168
  • Location: Port Angeles
Re: Gunsmith pricing???
« Reply #5 on: April 27, 2015, 09:57:39 AM »
"Rest of the Story" as Paul Harvey said:


 


* Advertisement

* Recent Topics

SimplePortal 2.3.7 © 2008-2024, SimplePortal