collapse

Advertisement


Author Topic: Ruger Blackhawk single action cylinder won't rotate  (Read 6189 times)

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 616
  • Location: Monroe
Ruger Blackhawk single action cylinder won't rotate
« on: October 01, 2016, 05:35:28 AM »
Been slowly going thru my safe and have a ruger Blackhawk new model in 30 carbine. For some reason the cylinder will not rotate when the loading gate is open. Initiall thought that a pin or spring was missing but i Have the same gun in .357 and have taken both apart and compared and all parts apear to be present and assembled correctly.

Thoughts?

Sent from my SM-G900V using Tapatalk


Offline craigapphunt

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 151
  • Location: centralia, wa
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #1 on: October 01, 2016, 06:47:04 AM »
ive been told ruger has good customer service you might give them a call.

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1187
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #2 on: October 01, 2016, 08:17:24 AM »
Is it an "old model"? Try putting the hammer on half cock and try it.

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1947
  • Location: Poulsbo
  • Groups: Encore 280
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #3 on: October 01, 2016, 08:18:29 AM »
It's the "new model" and not the "3 screw"? The old 3 screw ya have to pull the hammer back to half cock other than that not sure what it would be.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 616
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #4 on: October 01, 2016, 09:05:17 AM »
Yeah it's the new model.

Sent from my SM-G900V using Tapatalk


Offline HawkCreek

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 527
  • Location: Grant, Lincoln and Douglas
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #5 on: October 01, 2016, 12:06:28 PM »
Check that the hammer plunger and/or the hammer plunger cross pin aren't damaged or binding up. Happened on my Vaquero. Disassembled they looked ok and seemed to move but when I removed them the cross pin was beginning to sheer and bend. I replaced them both and it's worked fine ever since.

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1187
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #6 on: October 01, 2016, 05:45:12 PM »
Try using the cross pin and spring from the 357.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 616
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #7 on: October 01, 2016, 05:51:17 PM »
Hmm good ideas will try and get some work in once our baby is down.

Sent from my SM-G900V using Tapatalk


Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #8 on: October 01, 2016, 06:42:38 PM »
cylinder pawl latch or spring, or both.
Ruger will give you the parts.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 616
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #9 on: October 03, 2016, 07:16:42 PM »
Finally got around to taking a 2nd look and discovered I'm an idiot... the 357 is a new model and the 30 carbine is the old... doh

Sent from my SM-G900V using Tapatalk


Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1187
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #10 on: October 03, 2016, 07:29:05 PM »
Can't beat a cheap easy fix.

 


* Advertisement

* Recent Topics

Let’s see your best Washington buck by high_hunter
[Yesterday at 10:31:08 PM]


Bearpaw Season - Spring 2024 by actionshooter
[Yesterday at 09:43:51 PM]


Walked a cougar down by MADMAX
[Yesterday at 08:31:53 PM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]


Long Beach Clamming Tides by Encore 280
[Yesterday at 05:16:00 PM]


WTS Suppressors I Can Get by dreadi
[Yesterday at 03:30:33 PM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by Longfield1
[Yesterday at 03:27:51 PM]


Straight on by kentrek
[Yesterday at 03:04:53 PM]


2024-2026 Hunting Season Proposals by trophyhunt
[Yesterday at 01:51:40 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal