collapse

Advertisement


Author Topic: Vx-3 b&c or?  (Read 1613 times)

Offline T-Dozzer

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 868
  • Location: East and West
Vx-3 b&c or?
« on: October 03, 2017, 06:50:20 PM »
Anyone have experience with the Leopold vx-3 boone and Crocket 4.5x14x40/50? Seems like it would pretty fast go get on target if below 600yds, but I don't understand how it comes calibrated for all makes & calibers. A 200yd drop on a 300wm would be different than a 22-250.
Another consideration is going with something like a vortex viper & running a custom turret.

Thougts?
« Last Edit: October 03, 2017, 08:57:58 PM by T-Dozzer »

Offline HUNTNORTHWEST

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Aug 2013
  • Posts: 241
  • Location: Wenatchee
Re: Vx-3 b&c or?
« Reply #1 on: October 03, 2017, 06:52:54 PM »
I prefer Leupold optics. The glass seems to perform better in low light then Vortex.

They both have the same warranty.

I have had the BC reticle and I liked it. Leopold also can make custom turrets.

A remarkable experience is one where the pain is forgotten so quickly, the frustrations and struggles are forgotten the minute you’re done.

I can’t wait to do it the next time.

Offline T-Dozzer

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 868
  • Location: East and West
Re: Vx-3 b&c or?
« Reply #2 on: October 03, 2017, 06:59:06 PM »
Custom turrets with that reticle might be overkill. Its got elevation & crude windage built in, but i would consider a different reticle snd turret.
« Last Edit: October 03, 2017, 07:29:19 PM by T-Dozzer »

Offline Buzz2401

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1201
  • Location: Shelton
Re: Vx-3 b&c or?
« Reply #3 on: October 05, 2017, 08:23:11 PM »
The b&C isn't calibrated for all calibers.  It is close then you need to plug in ballistics and do a dope chart.  Being second focal plane you can usually lower scope power to get the B&C reticle to be very close to being on for the designated hash marks.  For the hash mark scopes to work you do need to know your actual MV and plug in a few numbers.  They are not as plug and play as they make it out to be but they do work very well and I prefer the hash marked scopes over turrets.

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 868
  • Location: Tri-Cities
Re: Vx-3 b&c or?
« Reply #4 on: October 05, 2017, 09:36:15 PM »
zeiss conquest hd5 with the rapid z 800 :tup:

Offline T-Dozzer

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 868
  • Location: East and West
Re: Vx-3 b&c or?
« Reply #5 on: October 09, 2017, 02:48:54 PM »
Decided to go  CDS.

 


* Advertisement

* Recent Topics

SimplePortal 2.3.7 © 2008-2024, SimplePortal