collapse

Advertisement


Author Topic: Fish Field Care Info for Mounting (Skin Mounts and Reproductions)  (Read 34757 times)

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Fish Field Care Information
(Skin Mounts & Reproductions)


Skin Mounts

1.  When you catch a fish make sure you avoid touching the body as much as possible.

2.  Don’t let your fish flop around as they will loose a lot of their scales this way and possibly cause themselves damage.  Making a skin mount harder to make look good.

3.  If you can keep your fish alive on a stringer that is great.  If it is Dead do not keep it in the water.  Water will speed up the decomposition process.

4.  Do not gut or scale the fish.

5.  Take an old towel and get it wet.  Lay the fish on the towel with all the fins laying up against the body and carefully roll it up in the towel.  Lay the fish in a cooler full of ice.  Until you can get it home and than freeze it immediately.

6.  Once you get the fish home go ahead and remove the towel and lay the fish in the bottom of a plastic bag with the fins laying flat up against the body.  Now roll the fish up in the bag squeezing out all the air to prevent freezer burn.  Now put him in the freezer where it will not get bumped.  Especially the tail and other fins because they will break. 

7. Once a fish comes out of the water the color of the fish begins to fade and it can happen quickly.  When you go fishing keep a camera handy and get lots of photo’s as soon as the fish is caught, from all angles.  The taxidermist can recreate the colors a lot more accurately if they have pictures to go by.
 
8.  Some species of fish are extremely oily and will require a fiberglass reproduction instead of an actuall skin mount.  Why?  Even though the skin is preserved some oil may in time ruin the airbrushing paint that is used to restore the color.  Some species are Catfish, Salmon, Saltwater Fish, etc.



Reproductions

Reproductions (Repro) are just that a fiberglass or resin reproduction of a once live fish.  They are an alternative to skin mounts.  Nothing of the original fish is used in the Repro.  Thin skinned and oily fish that would otherwise have a limited life span after mounting are better suited as a reproduction.

Also if you are fishing a Tournament and it is mandatory catch and release there is no way of having a skin mount done.  A reproduction also comes in handy if you are going on a remote or a week long fishing trip with no access to a freezer.
 
All you need are the measurements off of the fish and pictures. Their are only 2 measurements that are required to find a Repo for your fish. 

*The Length Measurment (tip of nose to tip of tail)
*Girth Measurment (fattest circumfrence of the fish).



If you catch a new state record or a fish realy close than a reproduction is probably not going to be available.  However one can be made from your fish.  So if you release it than you may not have the opportunity to have one made.

If you plan on getting a reproduction done instead of a Skin Mount than make sure to get lots of pictures.  Close ups and pictures of the entire fish.  Also make sure to get pictures of any special marking on your fish.  They can be reproduced on the reproduction.  Pictures help us to get the colors as close as possible on your fish.  It helps us with the color shades, etc, etc. 

Their are some Plus's and some Negative's to using a Repo instead of a skin mount.

PLUS's
1. You don't have to worry about the fish attracting bugs after it was mounted.
2. Their is no fish smell.
3. Repos will last forever.
4. You can realease your fish so others can have an opertunity to catch it and also allow the fish to keep spawning.
5. You can eat your fish


NEGATIVE's
1. It's not "your" fish....it's a fiberglass repo
2. A reproduction maynot be the exact size as your fish (off by an inch or more depending on type of fish). Their are a dozen or more companies that sell repos so more often than not a repo can be found to fit your fish's measurments.

Offline MatthewHunter98

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Aug 2012
  • Posts: 257
  • Location: Poulsbo
  • Love life for the Little things, thats what counts
  • Groups: Outdoor life
Re: Fish Field Care Info for Mounting (Skin Mounts and Reproductions)
« Reply #1 on: March 22, 2014, 11:44:13 AM »
Im interested in trying to do a skin mount on a fish that i would catch in thee future more like a bass for this situation, What do you think of this link and how they say to do it compared to your techniques, what tips do you have to share, and could you tell me how i can preserve the head? theres the link
http://www.trails.com/how_2379_mount-a-fish.html
Lets go, we got fish to catch on the boondocks!!!

 


* Advertisement

* Recent Topics

Walked a cougar down by Woodchuck
[Today at 07:05:51 AM]


Bearpaw Season - Spring 2024 by duckmen1
[Today at 06:52:09 AM]


Let’s see your best Washington buck by gramps
[Today at 06:50:22 AM]


CVA optima V2 LR tapped hole for front sight by jrebel
[Today at 06:27:01 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]


Long Beach Clamming Tides by Encore 280
[Yesterday at 05:16:00 PM]


WTS Suppressors I Can Get by dreadi
[Yesterday at 03:30:33 PM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by Longfield1
[Yesterday at 03:27:51 PM]


Straight on by kentrek
[Yesterday at 03:04:53 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal