collapse

Advertisement


Author Topic: FOC question  (Read 3685 times)

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1238
FOC question
« on: July 26, 2016, 07:45:02 PM »
With 100 grain tips Im at 14.03%. With 125s, Im at 15.3%. Im shooting a 350 spine carbon express maxima at 28 1/2" at 62#. I think my arrow might be a little stiff with the 100s, but I like the 14% FOC. Is 15.3% to much? Am I over thinking this?

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #1 on: July 26, 2016, 07:56:51 PM »
You must have some heavy inserts!

Or some REALLY light fletching.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1238
Re: FOC question
« Reply #2 on: July 26, 2016, 08:06:16 PM »
I have 4 fletch blazers :dunno: Maybe I didn't figure it out right :dunno: My arrow length is 28.5" and my balance point was at 18.25" with 100s, and 18.63" with 125s. So, minus 14.25" from 18.25"=4, multiply by 100=400, divide by 28.5"=14.03% .....right?

Offline Gobble Gobble

  • Proud Daddy & Disabled Veteran
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1076
  • Location: Yakima, WA
  • B.O.H.I.C.A.
Re: FOC question
« Reply #3 on: July 26, 2016, 08:15:15 PM »
Since I shoot GT I like to use their calculator.


https://www.goldtip.com/calculators.aspx 
God Bless,
Scott

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #4 on: July 26, 2016, 08:18:20 PM »
Don't forget you need to add the length of point.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1238
Re: FOC question
« Reply #5 on: July 26, 2016, 09:09:13 PM »
Ok, so I figured out where I went wrong. I burned an inch when I measured to my balance point so my 18.25" is really 17.25" :chuckle:. Man its hard being a dumb ass sometime :bash: Looks like the 125s will put me at 11.84%. I think that should work.

Offline Torrent50

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 535
  • Location: Rochester
Re: FOC question
« Reply #6 on: July 26, 2016, 09:42:24 PM »
I'm at about 21% and they fly great.
"when you gaze long into the abyss, the abyss gazes also into you."  Friedrich Nietzsche

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #7 on: July 27, 2016, 06:05:20 AM »
Ok, so I figured out where I went wrong. I burned an inch when I measured to my balance point so my 18.25" is really 17.25" :chuckle:. Man its hard being a dumb ass sometime :bash: Looks like the 125s will put me at 11.84%. I think that should work.

If I were shooting my Maxima shafts at that length with factory inserts...I would be shooting a 125 grain head.  It is a great set-up!  One of my all time favorites :tup:
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1238
Re: FOC question
« Reply #8 on: July 27, 2016, 06:27:25 AM »
Sweet, thanks Rad.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #9 on: July 27, 2016, 06:39:21 AM »
I have found there are certain thresholds in archery that really make a difference. 55# draw weight, 12% FOC, 350 grain arrow...just to name a few.  But once you break that barrier the returns don't necessarily increase exponentially.   So while there are concerns about reaching numbers we can over think our equipment, for North American game, rather easily. 

IMO - The simple math is normally more than effective.  So I'll take an arrow with point that measures 28.5" and mark the mid point (14.25).  Then 28.5 x .12 = 3.42" so I make another mark forward of the center mark by 3.42".  If my arrow balances at that mark or forward of that mark...I'm good.  More than 12% is just minutia in my mind unless I'm questionable on fletching or excessive on broadhead surface.

Our efforts are often better focused toward accuracy, repeatability and choosing the right shot than on the trivial details within the minutia.  Even if those details can, at times, be fun!
« Last Edit: July 27, 2016, 07:35:48 AM by RadSav »
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3533
  • Location: Pensacola, Florida
Re: FOC question
« Reply #10 on: July 27, 2016, 07:14:31 AM »
I'm guessing you get fingered the 24.25 as it should be 14.25.

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 4021
  • Location: Out of Place
  • Kill 'em
Re: FOC question
« Reply #11 on: July 27, 2016, 07:28:09 AM »
I'm guessing you get fingered the 24.25 as it should be 14.25.

I'm guessing you fat fingered the "get" as it should be "fat". :chuckle:

Unless you meant "got" instead of "get" and we'll just leave that for another thread.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3533
  • Location: Pensacola, Florida
Re: FOC question
« Reply #12 on: July 27, 2016, 07:29:44 AM »
Lol, damn autocorrect.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #13 on: July 27, 2016, 07:36:11 AM »
 :chuckle: :chuckle:  Come on coffee...I need you!
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1238
Re: FOC question
« Reply #14 on: July 27, 2016, 10:03:12 AM »
 :chuckle: :chuckle:

 


* Advertisement

* Recent Topics

Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by addicted1
[Yesterday at 10:11:08 PM]


Upland Side by Side by TitusFord
[Yesterday at 08:54:19 PM]


Public Land Sale Senate Budget Reconciliation by JDArms1240
[Yesterday at 08:45:13 PM]


North Peninsula Salmon Fishing by metlhead
[Yesterday at 07:43:57 PM]


2025 Quality Chewuch Tag by MADMAX
[Yesterday at 07:08:53 PM]


3 days for Kings by Stein
[Yesterday at 06:45:11 PM]


Kinda fun LH rimfire rifle project by JDHasty
[Yesterday at 06:44:33 PM]


Can’t fish for pinks area 8-2? by WAcoueshunter
[Yesterday at 05:22:46 PM]


GMU 247 Entiat bear hunting by GeoSwan
[Yesterday at 03:02:21 PM]


Evergreen youth livestock show and sale by HUNTIN4SIX
[Yesterday at 02:24:03 PM]


2025 NWTF Jakes Day by wadu1
[Yesterday at 02:19:48 PM]


Dandy Bull by Buckhunter24
[Yesterday at 01:29:37 PM]


Tricer AD tripod by gee_unit360
[Yesterday at 12:40:45 PM]


How a Product That Changed Hunting FOREVER was invented in the 1980's by jrebel
[Yesterday at 11:28:44 AM]


Ten Years, and still plugging along by JWBINX
[Yesterday at 10:22:55 AM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 10:04:16 AM]


3BR Condo in Tacoma with views of the Narrows and Olympic Mountains by Gentrys
[Yesterday at 09:44:45 AM]


Nooksack Archery Tag by high_hunter
[Yesterday at 09:37:52 AM]


Selkirk bull moose. by greenhead_killer
[Yesterday at 07:04:22 AM]


HUNTNNW 2025 trail cam thread and photos by Turner89
[Yesterday at 06:47:37 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal