collapse

Advertisement


Author Topic: How to "safely" install/tighten/remove broad heads.....  (Read 5648 times)

Offline WapitiTalk1

  • Business Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 7902
  • Location: Wet Side, Rainier, WA
  • Groups: RMEF, NRA, US Army (R)
How to "safely" install/tighten/remove broad heads.....
« on: July 29, 2017, 08:51:27 PM »
Folks, broad heads are very sharp out of the package. Every single year since I can remember, I hear about or see where folks have hacked their fingers putting their broad heads on/off. Yes, the broad head wrenches are part of the equation for safe install/tighten but if you take it a step further and use the vise method, you won't have a need to count how many fingers are left on your hand. Simply put your broad head wrench in a vise, put the tip on your arrow, put it down in said broad head wrench... and tighten it down (or take it off as required) safely. I've used this method for many, many years due to having hacked my finger to the bone just screwing around with a less than effective method ;).

Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

Offline biggfish

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 754
  • Location: Spanaway
  • Groups: NRA
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #1 on: July 30, 2017, 12:48:10 AM »
I know I should and have a wrench but every time I just work slow and careful. I know it's going to bite me one of these times.

Sent from my LG-K425 using Tapatalk

Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.  Gen. 27:3

Offline WapitiTalk1

  • Business Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 7902
  • Location: Wet Side, Rainier, WA
  • Groups: RMEF, NRA, US Army (R)
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #2 on: July 31, 2017, 07:59:31 PM »
You'll shoot your eye out kid. :).
Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13261
  • Location: Lake stevens
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #3 on: August 14, 2017, 12:54:22 PM »
I missed this thread

Offline CoryTDF

  • Make it Rain!!!
  • Non-Hunting Topics
  • Trade Count: (+5)
  • Frontiersman
  • *****
  • Join Date: Feb 2009
  • Posts: 3184
  • Location: Walla Walla
  • Look at me I'm blowing a duck call!
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #4 on: August 14, 2017, 01:00:57 PM »
BWAHAHAAHAHHAHAHAHHAAHHAHA this brings up some really painful memories. I have some good scars/"teaching moments'' that keep me from doing this again.

Glad your not all bled out on the floor. Bet you don't do that again.
CoryTDF

"The only thing necessary for the triumph of evil is for good men to do nothing"
- Edmund Burke (1729-1797), British statesman and philosopher

Offline Jpmiller

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: May 2016
  • Posts: 4049
  • Location: Martin, ND
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #5 on: August 14, 2017, 05:18:12 PM »
Good idea! Broad heads probably scare me more than any other thing so I always work super slow and with the wrench but any little bit more helps. Good tip

Offline theleo

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1212
  • Location: Kennewick
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #6 on: August 15, 2017, 01:21:00 PM »
When I started archery hunting a family friend gave me his box of random broad heads. In it were a couple of wrenches out of made out of stamped tin (Rocky Mountain was the maker I believe) that fit on keychain. That's all I've ever used for messing with my broad heads.   

Offline J.Brower

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 364
  • Location: Snohomish
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #7 on: August 16, 2017, 11:28:45 AM »
My G5 DeadMeat expandables came with a broadhead wrench. Looks like it would fit all 2, 3, and 4 blade heads. Great little freebie!

Offline Seahawk12

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Sep 2014
  • Posts: 3046
  • Location: Kenmore
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #8 on: August 18, 2017, 03:42:11 PM »
So, you're saying I shouldn't use my teeth for installing and removing broadheads anymore?  :tup:
"I make up my opinions from facts and reasoning, and not to suit any body but myself. If people don't like my opinions, it makes little difference as I don't solicit their opinions or votes."
William Tecumseh Sherman

Offline WapitiTalk1

  • Business Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 7902
  • Location: Wet Side, Rainier, WA
  • Groups: RMEF, NRA, US Army (R)
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #9 on: August 18, 2017, 06:14:15 PM »
So, you're saying I shouldn't use my teeth for installing and removing broadheads anymore?  :tup:

Are they "notched" for both three and four blades?  :chuckle:
« Last Edit: August 18, 2017, 06:37:20 PM by WapitiTalk1 »
Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

Offline Seahawk12

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Sep 2014
  • Posts: 3046
  • Location: Kenmore
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #10 on: August 18, 2017, 06:30:14 PM »
3 blade or 4 blade, that problem theems to retholve itself.
 :chuckle:
"I make up my opinions from facts and reasoning, and not to suit any body but myself. If people don't like my opinions, it makes little difference as I don't solicit their opinions or votes."
William Tecumseh Sherman

Offline WapitiTalk1

  • Business Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 7902
  • Location: Wet Side, Rainier, WA
  • Groups: RMEF, NRA, US Army (R)
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #11 on: August 18, 2017, 06:34:06 PM »
3 blade or 4 blade, that problem theems to retholve itself.
 :chuckle:

Umm, post of the day.  Thanks, I needed that.  On to watch the Hawk's pre-season game.  Looks like the main cats will play a quarter or two. 
Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

Offline tbotts

  • Past Sponsor
  • Trade Count: (+4)
  • Hunter
  • *****
  • Join Date: Jul 2007
  • Posts: 129
Re: How to "safely" install/tighten/remove broad heads.....
« Reply #12 on: August 19, 2017, 08:21:35 AM »
Good idea!  Thanks for sharing.

 


* Advertisement

* Recent Topics

Palouse buck deer by 6haase6
[Today at 07:33:12 AM]


Vashon Island deer tag by swanderek
[Today at 07:28:29 AM]


Cowiche Cow Archery Tag - Group Hunt by buglebuster
[Today at 07:24:11 AM]


Awesome customer service by ASHQUACK
[Today at 07:08:10 AM]


Oregon results posted. by kselkhunter
[Today at 07:02:52 AM]


Flatlanders coming west in 2024, any WA mule deer outfitter recommendations by brew
[Today at 06:46:01 AM]


2025 OILS! by Farmer72
[Today at 06:43:47 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by JWBINX
[Today at 06:26:47 AM]


Boat registration by metlhead
[Today at 06:18:37 AM]


2025 Draw Results by JDArms1240
[Today at 01:55:11 AM]


Norway pass Elk by moocher97
[Today at 12:11:05 AM]


Toutle Quality Bull - Rifle by moocher97
[Today at 12:00:21 AM]


Mature bulls during late season? by Dark2Dark
[Yesterday at 10:53:27 PM]


Cowiche Unit 368 by Limhangerslayer
[Yesterday at 10:41:37 PM]


Put in for a tag I NEVER thought I would draw. by elkrack
[Yesterday at 10:15:14 PM]


Commercial crab pots going in today. by Stein
[Yesterday at 09:37:31 PM]


FFL preferences or warnings in Olympia or south Sound area? by ASHQUACK
[Yesterday at 09:34:36 PM]


2024 deer. Let’s see um! by Beastmonger1987
[Yesterday at 09:11:35 PM]


Muzzy Mission Quality!!! by crabcreekhunter
[Yesterday at 09:11:30 PM]


Unknown Suppressors - Whisper Pickle by xrangerx
[Yesterday at 09:06:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal