Big Game Hunting > Backcountry Hunting

Tipi Build, Design Help Needed

<< < (11/12) > >>

kselkhunter:
The smokey thing is common to many titanium backcountry stoves.  I have a different brand stove, and same issue.  It gets worse as they get older with more use as things don't fit as tightly over time.   Sometimes I get smoke coming out from around the bolts/nuts that hold it together, other times from the creases on the sides.  Typically opening the door of the stove a crack to increase airflow solves it.   Once the stove gets roaring the smoke usually stops.   I have more smoke issues if I have the rain cap on top the stove pipe as that causes more draft issues.   


Definitely get a spark arrestor.   Not sure what brand stove you have but most stove companies sell spares. 


Some of the smoke issues can also be exacerbated by lack of airflow.  I like to set mine up where the front of stove is facing the zipper of the tipi, and keep the zipper an inch or two open to make sure enough airflow gets in for the stove.   


The rock-stacking under and around the stove helps hold heat longer.   But unfortunately a titanium stove just doesn't hold heat.  I use mine to dry my clothes every night, melt snow if I'm snow camping, and to warm up the tipi a bit before climbing into my sleeping bag.   I don't get up during the night to keep it stoked....too much work and hampers my sleep cycle.

luvmystang67:

--- Quote from: kselkhunter on November 22, 2019, 12:19:27 PM ---The smokey thing is common to many titanium backcountry stoves.  I have a different brand stove, and same issue.  It gets worse as they get older with more use as things don't fit as tightly over time.   Sometimes I get smoke coming out from around the bolts/nuts that hold it together, other times from the creases on the sides.  Typically opening the door of the stove a crack to increase airflow solves it.   Once the stove gets roaring the smoke usually stops.   I have more smoke issues if I have the rain cap on top the stove pipe as that causes more draft issues.   


Definitely get a spark arrestor.   Not sure what brand stove you have but most stove companies sell spares. 


Some of the smoke issues can also be exacerbated by lack of airflow.  I like to set mine up where the front of stove is facing the zipper of the tipi, and keep the zipper an inch or two open to make sure enough airflow gets in for the stove.   


The rock-stacking under and around the stove helps hold heat longer.   But unfortunately a titanium stove just doesn't hold heat.  I use mine to dry my clothes every night, melt snow if I'm snow camping, and to warm up the tipi a bit before climbing into my sleeping bag.   I don't get up during the night to keep it stoked....too much work and hampers my sleep cycle.

--- End quote ---

I have the same issue at night.  If i cut larger pieces they'll burn for longer, but I have to constantly tend to the damper.  It needs a lot of air to get going, but I need to be there quickly to prevent it from "taking off".  When it gets going it sounds like a jet and it'll get red hot halfway up the stove pipe if you dont' pay attention to it.  Last thing I need is for that to happen mid-sleep.

Its a titanium goat wifi stove.  They don't have them posted on their website right now (not sure if they're still in business or just reorganizing or what).  I've meant to order a stove-side spark arrestor from them.

Still its a HUGE step up from no stove/heat.  Boils water easily.  I have found that I like to bring a small foldable handsaw now to cut larger pieces for it.

CoryTDF:

--- Quote from: luvmystang67 on November 22, 2019, 01:28:59 PM ---
--- Quote from: kselkhunter on November 22, 2019, 12:19:27 PM ---The smokey thing is common to many titanium backcountry stoves.  I have a different brand stove, and same issue.  It gets worse as they get older with more use as things don't fit as tightly over time.   Sometimes I get smoke coming out from around the bolts/nuts that hold it together, other times from the creases on the sides.  Typically opening the door of the stove a crack to increase airflow solves it.   Once the stove gets roaring the smoke usually stops.   I have more smoke issues if I have the rain cap on top the stove pipe as that causes more draft issues.   


Definitely get a spark arrestor.   Not sure what brand stove you have but most stove companies sell spares. 


Some of the smoke issues can also be exacerbated by lack of airflow.  I like to set mine up where the front of stove is facing the zipper of the tipi, and keep the zipper an inch or two open to make sure enough airflow gets in for the stove.   


The rock-stacking under and around the stove helps hold heat longer.   But unfortunately a titanium stove just doesn't hold heat.  I use mine to dry my clothes every night, melt snow if I'm snow camping, and to warm up the tipi a bit before climbing into my sleeping bag.   I don't get up during the night to keep it stoked....too much work and hampers my sleep cycle.

--- End quote ---

I have the same issue at night.  If i cut larger pieces they'll burn for longer, but I have to constantly tend to the damper.  It needs a lot of air to get going, but I need to be there quickly to prevent it from "taking off".  When it gets going it sounds like a jet and it'll get red hot halfway up the stove pipe if you dont' pay attention to it.  Last thing I need is for that to happen mid-sleep.

Its a titanium goat wifi stove.  They don't have them posted on their website right now (not sure if they're still in business or just reorganizing or what).  I've meant to order a stove-side spark arrestor from them.

Still its a HUGE step up from no stove/heat.  Boils water easily.  I have found that I like to bring a small foldable handsaw now to cut larger pieces for it.

--- End quote ---

Heard a rumor that the founder of Ti-Goat died. Not sure if it's true but I am guessing it is as he never returned my email after I reviewed that stove for him.

I am surprised that you had a warping issue with it? I burned it in really hot on it's first burn so it should have held shape nicely and been pretty easy to assemble after that. Look for "fat wood" if you can find it. Fat wood is the center of most trees and can be found by kicking apart rotten logs or often times it is the only standing part of a rotten tree. You will get much longer burn times out of "fat wood" than sticks or chopped wood.

I am heading up tonight to test out 3 different Tipi's and titanium stoves. Should be a cool weekend of camping.

Magnum_Willys:
Yes on the titanium stove but I'd ditch the propane stove with the 20# cylinder.  Besides not being certified for inside use with the cylinder they create a ton of condensation issues with the propane byproduct being water. 

luvmystang67:

--- Quote from: Magnum_Willys on November 26, 2019, 02:08:51 PM ---Yes on the titanium stove but I'd ditch the propane stove with the 20# cylinder.  Besides not being certified for inside use with the cylinder they create a ton of condensation issues with the propane byproduct being water. 



--- End quote ---

This was when I had it set up next to the car as more of a base camp (note the cot).  I have the propane heater in there for chilly mornings when i want a quick heat boost while I'm getting dressed.  In backpack/spike camp mode, I would not have that.

The propane heater works a treat on chilly mornings, especially when morale is low.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version