Equipment & Gear > All Other Gear

Foxpro remote help TX500

(1/2) > >>

KFhunter:
My push button on/off selector is going bad.

Has anyone replaced it before?

Foxpro wants the remote and the caller for 2 weeks,  I gotta pay to ship both ways, plus parts/labor.  I'd do that, but I wanna hunt and it still mostly kinda works.

I'd like to do it myself if I could just find that switch on the internet.

Thanks


CS24B custom shop

Ridgeratt:
You have a picture of the switch?

KFhunter:
#16

Rotary selector knob.  It's a push down to select, rotate either direction infanitly to scroll.

tank21:
The rotary type switches (knob in this case) are not typically easy to swap.  If you can take it apart and swab the contacts and wiper with isopropyl alcohol and a qtip that might do it...high probability I’d say.

KFhunter:

--- Quote from: tank21 on December 05, 2020, 04:55:14 PM ---The rotary type switches (knob in this case) are not typically easy to swap.  If you can take it apart and swab the contacts and wiper with isopropyl alcohol and a qtip that might do it...high probability I’d say.

--- End quote ---

Thanks for the advice,  I'll try that for sure.   

Navigation

[0] Message Index

[#] Next page