Suppressors

[dreadi]

What would you recommend for a 6.5 PRC?

Dedicated 6.5 PRC? I'm using a Magnus on my PH2 in 6.5 PRC. However I'd say nothing less than an Ultra 7, preferably in .264.
An Ultra 9 would be next.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[pickardjw]

Dead Air Nomad Ti, 5/8 direct mount. Has close to 1000 rounds of carbon build up so a little heavier than new.

9.7oz per DA.

[dreadi]

Dead Air Nomad Ti, 5/8 direct mount. Has close to 1000 rounds of carbon build up so a little heavier than new.

9.7oz per DA.

9.7oz is not accurate. I don't know where they came up with that number. Previously they published 9.8oz.

Here's an example of a new Nomad Ti with the same mount.

Here's an example of a Nomad Ti that has had rounds through it over the past 2+ years, with and without their direct thread mount plus weights of some of their Xeno pieces.



Their published weight of that direct thread mount is 1.62oz.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[pickardjw]

Just a little thumb under the scale I guess.

Nice to see the A-10 under published weight by a skosh 

[b23]

What would you recommend for a 6.5 PRC?

For a 1.5in diameter can the TBAC Ultra 7 or 9 are as good as it gets but if you don't mind a can that is a little larger in diameter the Dead Air Nomad Ti XC which is the newest version of the Nomad Ti, for its size, is crazy quiet.  I recently got their new Nomad LTi XC which is a little longer then the Ti XC and they are one seriously impressive can.  I put a direct thread end on my LTi XC and that dropped a few ounces off of it over using their HUB and Xeno setup and I think it is slightly quieter with the direct thread.

In the big suppressor shootout TBAC did with as many different suppressors as they could get their hands on, which was a lot, the new Nomad Ti XC metered the same as the Ultra 9 did but is over two inches shorter and .25 larger diameter.