collapse

Advertisement


Author Topic: Lost Pinwheel User  (Read 2432 times)

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Lost Pinwheel User
« on: January 31, 2010, 11:51:49 AM »
I am trying to find the fellow out there running Pinwheel software who was kind enough to run some numbers on my set-up. We were discussing shafts required to produce a FOC of 19%.

I seem to have forgotten what thread he was lurking about in.

Thanks for your prompt response!

Konrad


PS   
A: Easton Technical’s program gave me the 2413 shaft size for my current configuration (which works admirably).
B: To answer your question, Yes, I have read almost all of Dr. Ashby’s work and find it to be invaluable.



Thanks again,
KL
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline bonkellekter

  • Washington For Wildlife
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2009
  • Posts: 459
  • Location: Spokane, WA
Re: Lost Pinwheel User
« Reply #1 on: January 31, 2010, 11:59:03 AM »
It was TODD ID in the archery forum - I believe the thread was titled - An Offer to Help - Thanks to his post I purchased the software too so if you would like I can run numbers for you as well.

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50670
  • Location: Duvall, WA
  • Groups: jackelope
Re: Lost Pinwheel User
« Reply #2 on: January 31, 2010, 12:05:46 PM »
"Hate speech does not exist legally in America. There's ugly speech. There's gross speech. There's evil speech. And ALL of it is protected by the First Amendment."

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Lost Pinwheel User
« Reply #3 on: January 31, 2010, 10:14:18 PM »
Thanks Guys!

I'll be sure to contact him there.

My rig is an 07 Bear Truth, draw weight 60 pounds, draw length 27 inches and a 29 inch shaft using a mechanical release.

I wanted to know what arrow spine and tip weight would give me a 19% FOC balance point
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Lost Pinwheel User
« Reply #4 on: February 01, 2010, 07:52:51 AM »
http://hunting-washington.com/smf/index.php/topic,43087.msg521240.html#msg521240

Here's the info that the program spit out for you.  Let me know if there's anything else you are needing to know.
Bring a GPS!  It's awkward to have to eat your buddies!

Offline xXx Archery

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Dec 2007
  • Posts: 699
  • Location: longview Wa
  • Site Sponsors
    • www.xxxarchery.com
Re: Lost Pinwheel User
« Reply #5 on: February 01, 2010, 08:49:48 AM »
Thanks Guys!

I'll be sure to contact him there.

My rig is an 07 Bear Truth, draw weight 60 pounds, draw length 27 inches and a 29 inch shaft using a mechanical release.

I wanted to know what arrow spine and tip weight would give me a 19% FOC balance point

Are you sure about your Draw?     draw length is measured from the string at full draw to the deepest part of the grip and then ADD 1.75" ...27" is short in a other post you said you are shooting 240fps with 490grain arrow so I ran some #'s

Total Arrow Weight: 490
Bow IBO Speed: 317   
Adjustment for Draw Length: -30    at 27" of draw
Adjustment for Draw Weight: -20    At 60lbs
Adjustment for Arrow Weight: -47
Adjustment for Weight on String: -3

Calculated Speed: 217 fps
Kinetic Energy: 51.25

now at 29" of Draw

Total Arrow Weight: 490
Bow IBO Speed: 317
Adjustment for Draw Length: -10
Adjustment for Draw Weight: -20
Adjustment for Arrow Weight: -47
Adjustment for Weight on String: -3

Calculated Speed: 237 fps  This is more inline with what you said you are shooting
Kinetic Energy: 61.13

Co-Owner of xXx Archery and Maker of xXx G-Strings

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Lost Pinwheel User
« Reply #6 on: February 01, 2010, 08:01:05 PM »
I started with the 29 inch draw module and have dropped down two. The old Sportsman's Warehouse chrono said  236 to 241 over six shots.
Maybe they needed new batteries???
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Lost Pinwheel User
« Reply #7 on: February 02, 2010, 08:53:24 AM »
I'd say that their chrono is more accurate than the software predictions we're offering here.  Mabye the draw weight is a little more than 60#?  Maybe the draw length is a bit longer than the modules say (quite common for a 30" module to be 30.75" draw, for example).  If you were using the software and massaging the input to match your stuff exactly, then I think the numbers would be much more precise.
Bring a GPS!  It's awkward to have to eat your buddies!

 


* Advertisement

* Recent Topics

What happened to the Cowlitz by BigGoonTuna
[Today at 04:05:47 AM]


Turnbull elk hunt by Dan-o
[Yesterday at 09:37:37 PM]


49 DN Moose Success by deer_hnter
[Yesterday at 08:56:39 PM]


Steaming Euro Mounts by lewy
[Yesterday at 08:23:42 PM]


Grayback Youth Hunt by Deer slayer
[Yesterday at 07:56:31 PM]


Displaced Hunting Camps? by NOCK NOCK
[Yesterday at 07:55:32 PM]


SPIKE??? by NOCK NOCK
[Yesterday at 07:53:00 PM]


Bugs and bones by jackelope
[Yesterday at 07:38:55 PM]


Mountain View archery elk. by High Climber
[Yesterday at 04:48:52 PM]


WWF influence on Inslee's final commission appointments by Firstgenhunter
[Yesterday at 04:02:57 PM]


What's your favorite elk hunting cartridge? by Cougartail
[Yesterday at 03:25:46 PM]


Mill creek watershed by Hot Lunch
[Yesterday at 01:29:07 PM]


Wy Region A whitetail by jamesfromseattle
[Yesterday at 01:18:15 PM]


Sheep Ewe - Whitestone Sheep Unit 20 by X-Force
[Yesterday at 11:42:47 AM]


Plugging bighorn sheep? by EnglishSetter
[Yesterday at 10:30:48 AM]


Paper bee hive, worth anything?? by Ridgeratt
[Yesterday at 09:16:52 AM]


Multi Season leftovers by HntnFsh
[Yesterday at 05:34:54 AM]


MA-10 Coho by WAcoueshunter
[October 04, 2025, 10:32:46 PM]


49 Degrees North Early Bull Moose by Rigby416
[October 04, 2025, 09:13:12 PM]


Ok which one of you is this!? by JDArms1240
[October 04, 2025, 08:19:21 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal