Post by: moosedrool on September 06, 2012, 02:42:22 PM
Thanks!
Post by: Sabotloader on September 06, 2012, 03:34:52 PM
Looking for a start up load for a. 50 Disc Extreme. I will be using 460 gr. conicals, #11 caps and T7 3f.
Thanks!
Couple of thoughts... T7-3f really does burn hot (hi Temperature) I might suggest the you consider a .510x.125 Shot card available from TOW. THis will protect the bottom of the bullet from melting on the way up the bore.
I shoot that bullet with 90 grs. of powder but most other will tell you 70-80 grains would do the job with that bullet and they are correct... I just got better groups with 90 + I like the extra velocity...
Post by: moosedrool on September 06, 2012, 04:38:12 PM
In what increments do you go up? I didn't know if I should dink around one grain at a time.
Post by: Sabotloader on September 06, 2012, 06:13:59 PM
Thanks Mike...
In what increments do you go up? I didn't know if I should dink around one grain at a time.
Oh heck! it takes 5 grains to see any real difference - I go in 10 grain increments by volume...
You might start at 60 just to get the feel of it... but you will not stay there long...
Here is a ballistic sheet for mine...
(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv130%2Fsabotloader%2FBallistic%2520Sheets%2F460NE-90Gr.jpg&hash=0b28a981cf42b78506fc92f3087d172d0dba04d8)
Post by: moosedrool on September 07, 2012, 12:30:23 PM