Hunting Washington Forum
Community => Photo & Video => Topic started by: RIVERRAT on November 04, 2012, 01:48:11 PM
-
cam was working just fine and when I changed batteries (duracell) i now get no display. The only thing I get is the red LED comes on momentarily then goes out. ANY help would be appreciated.
-
Try opening the battery compartment door and reclosing it. try pulling the SD Card and reinserting it. I had trouble after changeing batteries, and one of those things worked. Can't remember which one, though.
-
cam was working just fine and when I changed batteries (duracell) i now get no display. The only thing I get is the red LED comes on momentarily then goes out. ANY help would be appreciated.
Call Primos and tell them what is going on. These guys have sent me parts for free when they weren't even part of the camrea I bought from them, the battery charging wire/clips. GREAT service and no B.S. They get my vote... :tup:
-
I had a somewhat identical problem with my Truth 60. Their customer service was great, I got a new blackout out of the deal. The truth series has a lot of problems like your describing if you start searching around, even on the Primos forums. IMO it's the weatherproofing on the camera that is at fault. At least that was the case with mine. After it had been in my nice warm house for a couple months and dried out, it started working again.
-
My Truth cam 40something gave me problems last night. I put fresh batteries and a different SD card in and it wouldn't work anymore. I ended up putting the old SD card back in and it seems to be workin again. The last couple of times I have used it I have had trouble with it. Last winter I hung it over a boned out elk with no pics for 10 days, and most of the bones were gone. I will be at Cabella's the week after x-mas shopping for a new camera at 40 - 50 % off.
