Hunting Washington Forum

Equipment & Gear => Scopes and Optics => Topic started by: Boss .300 winmag on March 21, 2013, 06:48:29 PM

Advertise Here

Title: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: Boss .300 winmag on March 21, 2013, 06:48:29 PM

Has anybody used this software, if so was it worth it?


http://www.neconos.com/category/Software-2 (http://www.neconos.com/category/Software-2)

Title: Re: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: Boss .300 winmag on March 22, 2013, 05:29:29 PM

 :bumpin:

Title: Re: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: yorketransport on March 24, 2013, 10:33:37 AM

I use Load From A Disk, a similar program.

I've had great luck with it. That's how I came up with loads for both the 338/375 Ruger and my 375 BME wildcat. The velocity predictions were dead on with the 338/375 (within 10fps!) and very close on the 375 BME after making some adjustments to the internal case volumes.

Pretty useful programs and a ton of fun to play around with.

Andrew

Title: Re: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: Boss .300 winmag on March 24, 2013, 03:42:58 PM

Thanks for the info yorketransport.  :tup:

Title: Re: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: Boss .300 winmag on March 25, 2013, 08:59:18 AM

Quote from: yorketransport on March 24, 2013, 10:33:37 AM

I use Load From A Disk, a similar program.

I've had great luck with it. That's how I came up with loads for both the 338/375 Ruger and my 375 BME wildcat. The velocity predictions were dead on with the 338/375 (within 10fps!) and very close on the 375 BME after making some adjustments to the internal case volumes.

Pretty useful programs and a ton of fun to play around with.

Andrew

how did the trajectories turn out?

Title: Re: QuickLOAD/QuickTARGET Ballistic Prediction Software, V3.6
Post by: yorketransport on March 25, 2013, 07:10:03 PM

Trajectories were very close. Did a little tweaking to the BC, but as accurate as any other I've used.

Andrew