Hunting Washington Forum
Other Activities => Shed Hunting => Topic started by: trophyhunt on May 10, 2013, 08:58:59 AM
-
Found this on Tuesday in the ellesburg area, my guess is around 330 to 340? I will be out to find his other side!
-
WOW!!! I wish I would have went that direction!!! :yike: :bash: :bash: :chuckle:
Congrats on a great find :tup:
-
Great looking rack. :chuckle:
-
:tup:
-
Holy bone man!! Good find right there!!!! :tup:
-
my buddy might have the other side to it!
-
Is that the atl on the log? Would be pretty cool if it was.
-
Is that the atl on the log? Would be pretty cool if it was.
yes!
-
Nice!!! I found one just like that in eastern OR a couple years back...only problem was most of the tines were chewed to within 2-3" of the main beam :bash:
-
my buddy might have the other side to it!
would your buddy send me a pic? If it looks like the other side I would love to talk with him.
-
Great find man!
-
-I like the sword on him! Thats a dandy!! Love the 7pts!!
-
Nice! That's a dandy! :tup:
-
Nice find! Now go match it up, they don't have it.
-
Only had a couple hours to look today, only thing I found was a ton of Mosquitos. I'll b back!
-
Scared me for a second! Thought that was the match to a big one I found and realized it was a left as well. Nice!
-
I did a score today and this is what I came up with, 107'' in antler points length, 27'' in total thickness, the main beam length is 47'' and of course the spread is an estimate at 40''. So I did 107x2 =214. 27x2=54. 214+54=268. 268+47+40=355. I did not measure the 7th point as that is included in the main beam length, so I think I did it right. Of course with the spread being a guess it could be a bit smaller within a few inches. If I missed something please let me know, sure with I had the other side!!!!!
-
That's nutz about the ATL! Good looking bone.
-
I did a score today and this is what I came up with, 107'' in antler points length, 27'' in total thickness, the main beam length is 47'' and of course the spread is an estimate at 40''. So I did 107x2 =214. 27x2=54. 214+54=268. 268+47+40=355. I did not measure the 7th point as that is included in the main beam length, so I think I did it right. Of course with the spread being a guess it could be a bit smaller within a few inches. If I missed something please let me know, sure with I had the other side!!!!!
I checked my score with the exact (as much as possible, with the other side being the exact same and guess's on the tip to tip spread, inside spread and greatest outside spread) steps from the Boone and Crockett internet scoring system. It's sounds a bit high to me, but that spread sheet they have gave me a total score of 359 4/8. I would not have guessed that high, I would probably take off 10'' in total width measurements for errors with not knowing the real widths. Yeah I couldn't believe how his antler landed on those logs, it was pretty easy to spot from 30 yards away.
-
Nice, 8)
-
Great find. :tup:
-
What were all the tine lengths ? G-1 through g-6 ?
-
. You said 107 in tine lengths, thats a 17.8n inch average , that doesnt add up , take the antler lengths plus the mass @ 27 thats 134 plus the main beam @47 thats a total of 181. That would be the whole antler total . Double that for the other side and you got 362 before the inside spread wich on average 40 so that would be 402. You must have had the main beam added into the point length total of 107? that would make him 308 with a 40 inch inside.
-
.... or else it really is a 402 bull :chuckle:
-
Nice find! Can't wait until I draw the Archery Peaches Ridge Tag!!!
-
Some numbers, 1st point 16 2/8, 2nd 17 3/8, 3rd 16 7/8, 4th 18, 5th 11 5/8, 6th 3 4/8. main beam is 48 4/8. The four diameter measurements are 7 7/8, 6 6/8, 6 4/8, and 6 4/8. I put all my measurements on the Boone and Crockett website for scoring, they had 3 width measurement to do, they must average them together to get a average width?
-
159 6/8 total on the antler , doubled with a 40 inch inside its a 359 4/8 gross bull. OINK!!!! Hell of a shed man!!
what threw me off was your total point length wich was actually 83 5/8 instead of 107. Thanks for putting up youur measurements .
-
Thanks bucklucky, I still think my width is off but still a great find for me. I appreciate the help! :tup:
-
Pig of a bull man! :drool: Again great find!! :tup:
-
pretty sure I have ur match I will pm u a pic and location
-
pretty sure I have ur match I will pm u a pic and location
if antlerking doesnt have it I prob do. Looks like the bull.
-
pretty sure I have ur match I will pm u a pic and location
if antlerking doesnt have it I prob do. Looks like the bull.
If you have it, give it to me :chuckle: :chuckle:. I would like to find out if it is, Pm me and we'll see if we were in the same area. I think your in a different spot than me, I found this by ellesburg on the watt canyon side.