Hunting Washington Forum

Community => Photo & Video => Topic started by: Evoac05 on May 16, 2013, 09:38:52 PM

Title: Primos cams sensitivity
Post by: Evoac05 on May 16, 2013, 09:38:52 PM: What sensitivity level seems to work best for Primos cams?
Title: Re: Primos cams sensitivity
Post by: demontang on May 16, 2013, 09:43:31 PM: What one do you have. They have a lot of cameras out and from what ive seen a narrow field that they pick up.
Title: Re: Primos cams sensitivity
Post by: Evoac05 on May 16, 2013, 10:23:00 PM: I have the 35 and 46. I am putting them out tomorrow and wanted to see if anyone knew what sensitivity setting seems to work best.
Title: Re: Primos cams sensitivity
Post by: fishngamereaper on May 17, 2013, 07:25:50 AM: Depends on where you set them. Open country or thick timber. All my primos are set at different levels because of where they are set. Set your cams and play with the sensitivity level depending on how many false pics you get....ie dancing tree branches etc. Good luck.
Title: Re: Primos cams sensitivity
Post by: demontang on May 17, 2013, 07:49:06 AM: It does depend on where they are going. I start at high if theres not a lot around to move in the wind. I would look where your setting it and decide then go back and check it. Make sure you point it down a trail or some where the animals will stop.
Title: Re: Primos cams sensitivity
Post by: Nice Racks on May 18, 2013, 07:19:05 PM: I had my P 35 set on normal and got 147 pics of the wind! It works though. :)
Title: Re: Primos cams sensitivity
Post by: Evoac05 on May 18, 2013, 08:35:00 PM: I set out four cams yesterday. I set them at different sensitivity levels so I guess I'll see which works best.