Hunting Washington Forum

Big Game Hunting => Muzzleloader Hunting => Topic started by: huntnfmly on August 10, 2013, 06:08:39 PM


Advertise Here
Title: tapping bullet with starter
Post by: huntnfmly on August 10, 2013, 06:08:39 PM
My daughters are using sst bullets with a t handle starter and was just wondering if there is anything wrong with tapping on starter or is it better to just apply pressure .Sometimes inbetween swabbing the barrel it gets a little tough.
Thanks
Title: Re: tapping bullet with starter
Post by: Jason on August 10, 2013, 06:45:44 PM
I'm not sure if tapping would be a good idea :dunno: I've always just always pushed them in with my bullet starter. One thing I do is lube up the outside of every sabot with bore butter and keep them in a speed loader to keep them clean while afield.
Title: Re: tapping bullet with starter
Post by: MountainDevil54 on August 10, 2013, 06:47:37 PM
worse thing you can do is lube a sabot, they are meant to go down with some force behind them.

I don't tap, just a good steady push with my range rod. Never needed a short starter unless I was shooting conicals that needed a good whack to get them past the band or for patched round balls.
Title: Re: tapping bullet with starter
Post by: kerrdog on August 14, 2013, 07:53:46 AM
Say "NO" to bore butter with sabots.  You want that rifling to cut into that sabot.  Get a range rod.  Easy loading is way over-rated.
Title: Re: tapping bullet with starter
Post by: CP on August 14, 2013, 08:04:27 AM
Swab more ofter, keep your bore and your sabots clean.
SimplePortal 2.3.7 © 2008-2025, SimplePortal