Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: duckmen1 on November 30, 2013, 05:01:39 PM

Advertise Here

Title: Magtech 20 gauge single shot not ejecting.
Post by: duckmen1 on November 30, 2013, 05:01:39 PM

Not my luck on single shots I guess but after having the gun a few years and just loving it it quit auto ejecting when opening after shot. I can pull it out no problem with my fingers but it is suppose to ping and fly out when you break open the barrel. Any thoughts on this one.
It isn't the same problem as the other but similar

Title: Re: Magtech 20 gauge single shot not ejecting.
Post by: biggfish on December 04, 2013, 03:23:57 PM

My magtech .410 did that I took the barrel off and sprayed the ejector with carb cleaner it can get gummed up if you use it a lot.

Title: Re: Magtech 20 gauge single shot not ejecting.
Post by: duckmen1 on December 04, 2013, 08:05:10 PM

Found the problem the pin that holds the spring in place broke and is not holding it straight. Need to find out where to get it. Magtech has a weird website but I will get it done now that I know what the problem is.
Time to figure out the break action 12 gauge