Post by: 92xj on December 18, 2013, 04:10:57 PM
I have a limited budget of 300-400 bucks and want to be able to grind and stuff snack sticks, and some brat size stuff.
Would I be better off getting a lower end grinder and a seperate stuffer, or spend the money on a cabelas 3/4 hp grinder and just use the sausage tubes to stuff with?
Also, depending on which way you suggest, what are your suggestions on pieces of equipment?
I have a few Cabelas cards to use so would like to stay that route, but would be open for the Northern tool route or any other suggestions.
This will be used on a small scale. 100lbs of duck and geese and year and 100 pounds of game/pork/beef a year.
Post by: MtnMuley on December 18, 2013, 04:15:57 PM
Post by: The Weazle on December 18, 2013, 07:24:02 PM
It's taken me a few years, but now I have a Bradley smoker, a cabelas 1 hp grinder, an 11lb vertical stuffer, a slicer, and several large stainless mixing bowls and plastic tubs. I started with a $59 cabelas grinder and a little chief smoker about 7 or 8 yrs ago and have upgraded everything over time. I don't have a mechanical mixer, but after borrowing one several times, and just doing it by hand, I like doing it by hand the best. I think I am now ahead of custom meat costs from the butcher from this years deer.
Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)
Post by: billythekidrock on December 18, 2013, 07:29:26 PM
I would get the best grinder you can afford, and use the tubes attached it it, then buy the biggest stuffer you can afford next year.
It's taken me a few years, but now I have a Bradley smoker, a cabelas 1 hp grinder, an 11lb vertical stuffer, a slicer, and several large stainless mixing bowls and plastic tubs. I started with a $59 cabelas grinder and a little chief smoker about 7 or 8 yrs ago and have upgraded everything over time. I don't have a mechanical mixer, but after borrowing one several times, and just doing it by hand, I like doing it by hand the best. I think I am now ahead of custom meat costs from the butcher from this years deer.
Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)
:yeah:
Get the 1hp at a minimum.
Post by: dogtuk on December 18, 2013, 07:59:25 PM
Post by: Heredoggydoggy on December 18, 2013, 08:26:03 PM
Post by: Hawgdawg on December 18, 2013, 09:58:30 PM
Post by: NW-GSP on December 18, 2013, 10:01:23 PM
Hope you all have seen my threads lately. Kind of have the same dilemma going on. My opinion is don't use a grinder to stuff meat. It's like using your lawn mower to rip plywood. It all sounds good but a all in one tool is a joke! And after grinding and then re grind to go through the stuffer attachment you have game baby food baloney. :twocents:
I agree, grinding is one thing, stuffing needs a different tool!
Post by: billythekidrock on December 19, 2013, 05:31:48 AM
Hope you all have seen my threads lately. Kind of have the same dilemma going on. My opinion is don't use a grinder to stuff meat. It's like using your lawn mower to rip plywood. It all sounds good but a all in one tool is a joke! And after grinding and then re grind to go through the stuffer attachment you have game baby food baloney. :twocents:
I agree, grinding is one thing, stuffing needs a different tool!
As someone who makes about 100 lbs of sausage a year, I. That said, I would discourage someone on a budget from buying a cheaper grinder because they wanted a separate stuffer.
Get the best grinder now and make due until you can afford a good stuffer.
Post by: billythekidrock on December 19, 2013, 05:38:26 AM
Hope you all have seen my threads lately. Kind of have the same dilemma going on. My opinion is don't use a grinder to stuff meat. It's like using your lawn mower to rip plywood. It all sounds good but a all in one tool is a joke! And after grinding and then re grind to go through the stuffer attachment you have game baby food baloney. :twocents:
If you use a kidney disc or adapter flanges without the grinder knife and you won't have that issue.
Post by: LndShrk on December 19, 2013, 06:07:23 AM
http://www.northerntool.com/shop/tools/product_200451267_200451267 (http://www.northerntool.com/shop/tools/product_200451267_200451267)
I own this grinder and have put well over 1000lbs of meat through it over the years. Never had any issue and the blades / plates are standard fit.
You want a separate stuffer using the grinder to stuff takes for ever and is a PIA
I say get the LEM because I know the gears are metal and will save you headaches in the long run. I run the 5lb stuffer it is a good unit and can be had for around $150.00
Post by: billythekidrock on December 19, 2013, 06:28:56 AM
Save cash on your grinder and get a lem stuffer.
http://www.northerntool.com/shop/tools/product_200451267_200451267 (http://www.northerntool.com/shop/tools/product_200451267_200451267)
I own this grinder and have put well over 1000lbs of meat through it over the years. Never had any issue and the blades / plates are standard fit.
You want a separate stuffer using the grinder to stuff takes for ever and is a PIA
I say get the LEM because I know the gears are metal and will save you headaches in the long run. I run the 5lb stuffer it is a good unit and can be had for around $150.00
If you are only doing a deer or maybe two a year this grinder would work, but if you do more than that I wouldn't recommend it.
Though they can last for years with moderate use, the motor will burn out if you do a lot of meat every year.
Post by: grundy53 on December 19, 2013, 06:41:51 AM
:yeah: the professional butchers I know use one machine. Granted they are very expensive commercial grade machines.Hope you all have seen my threads lately. Kind of have the same dilemma going on. My opinion is don't use a grinder to stuff meat. It's like using your lawn mower to rip plywood. It all sounds good but a all in one tool is a joke! And after grinding and then re grind to go through the stuffer attachment you have game baby food baloney. :twocents:
If you use a kidney disc or adapter flanges without the grinder knife and you won't have that issue.
sent from my typewriter
Post by: danderson on December 19, 2013, 06:56:06 AM