Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: Karl Blanchard on June 25, 2014, 09:19:55 PM

Title: need assistance from someone with a nosler book
Post by: Karl Blanchard on June 25, 2014, 09:19:55 PM: Can someone tell me the min and max loads for a 165gr accubond and imr4350 for the 300wsm. Also the c.o.l. Thanks! Been a hornady guy for years but I can't find any interbonds for the life of me and am fed up with trying to find hornady components. Bimart has accubonds on the shelf at all times! -Karl
Title: Re: need assistance from someone with a nosler book
Post by: Fl0und3rz on June 25, 2014, 09:32:36 PM: http://www.nosler.com/s/300-WSM-165gr-version-7-0.pdf (http://www.nosler.com/s/300-WSM-165gr-version-7-0.pdf)
Title: Re: need assistance from someone with a nosler book
Post by: Heredoggydoggy on June 25, 2014, 09:36:09 PM: 300wsm IMR 4350 62.0* 64.0 66.0max. 2.830 col. tested. SAMMI Max.=2.860"

*= most accurate load tested.

From the Nosler #7 manual. Hope this helps...

The link Fl0und3rz gave is probably your best bet for up-to-date info. I've found that sometimes the manual is misprinted.
Title: Re: need assistance from someone with a nosler book
Post by: Karl Blanchard on June 25, 2014, 09:38:58 PM: Thanks guys! I need to get a bowler book but I am playing at the reloading bench now and am not patient! :chuckle: thanks again guys!!!!
Title: Re: need assistance from someone with a nosler book
Post by: porcupine on June 25, 2014, 09:42:16 PM: Nosler #6

300WSM
165 gr AccuBond

IMR 4350
Max 66.0 3151fps muzzle velocity 94% volume
64.0 3050fps 90%
Starting 62.0 2955fps 89% (most accurate load tested)

c.o.l. 2.860"
case Winchester
primer WLRM