Hunting Washington Forum

Big Game Hunting => Bow Hunting => Topic started by: bowtechian on March 10, 2015, 02:39:56 PM


Advertise Here
Title: Shooting tips on stabilizer selection
Post by: bowtechian on March 10, 2015, 02:39:56 PM
I was curious about the proper way on determining how much weight you should be using? This is for a hunting set up. It seems most stabs are more vibration dampening than stabilizing 
Title: Re: Shooting tips on stabilizer selection
Post by: JJD on March 10, 2015, 05:00:09 PM
I'm a hunter, not a target competator.
I know several guys who don't use stabilizers at all.
I'm sure a long way from being knowledgeable, but my stabilizer is small and does little more than keep my wrist sling in place.  Can't say for sure that it dampens anything.
The sling doesn't do much either (unlike a rifle sling) Bow sling does little more than keep me from thinking my bow will fall to the ground when I shoot and follow through correctly. 
Title: Re: Shooting tips on stabilizer selection
Post by: bowtechian on March 10, 2015, 05:18:00 PM
I've tested a few out found some that help with pin float, just getting some more info before I pull the trigger on a stab 
Title: Re: Shooting tips on stabilizer selection
Post by: Lucky1 on March 10, 2015, 05:34:07 PM
A long heavy stabilizer tightens up my groups. It's not convenient for hunting though. Sometimes I hunt without one.
Title: Re: Shooting tips on stabilizer selection
Post by: pianoman9701 on March 11, 2015, 06:43:21 AM
Stabilizers are different for each person. It has a lot to do with your set-up, your specific form, and the bow you use. The only way to tell which stabilizer is right for you is to try out several. Some people need very little , if any weight added out front. Some need a lot. Some need front and back. I started with a small stabilizer and eventually went with a 10" Stinger.
Title: Re: Shooting tips on stabilizer selection
Post by: coachcw on March 11, 2015, 06:55:18 AM
I like to add weight to a carbon bow ! :chuckle:. I really don't have much use for one but I guess if you a target shooter you need one since every buddy else has them .
Title: Re: Shooting tips on stabilizer selection
Post by: nanserbe on March 11, 2015, 10:52:15 AM
Some people say that 8-10" is the minimum before you start seeing the benefits of tighter groups/less pin float. As for weight, it's kind of preference. You're best trying a few different ones out if you can. I wouldn't go more than 11" around here for hunting though, as it can get snagged on brush pretty easily. There are quick connects you can get though, I think Bee Stinger makes them.
Title: Re: Shooting tips on stabilizer selection
Post by: pianoman9701 on March 11, 2015, 10:54:24 AM
  :yeah: I have a quick disconnect for my Bee Stinger.
Title: Re: Shooting tips on stabilizer selection
Post by: stromdiddily on March 11, 2015, 01:13:49 PM
I use a 12" with 6oz on my hunting stab...haven't run into any problems snagging on anything the last two years (spot and stalk and tree stand hunting)
Title: Re: Shooting tips on stabilizer selection
Post by: D-Rock425 on March 11, 2015, 03:45:26 PM
I run 10 inches on my hunting bow and 12 on my target.  Cant shoot s bow without a good stab trust me it helps.
Title: Re: Shooting tips on stabilizer selection
Post by: bowpredator on March 11, 2015, 05:13:49 PM
Run 12" on both my Hunting and Target rigs. Have more weight on my target rig than the hunting rig.
Title: Re: Shooting tips on stabilizer selection
Post by: BABackcountryBwhntr on March 14, 2015, 10:59:11 AM
I use  12 IN with 11 oz. I prefer my bows to be top heavy. There is a reason target shooters have long heavy stabilizers. They help stabilize the bow.
SimplePortal 2.3.7 © 2008-2025, SimplePortal