Post by: police women of America on July 20, 2016, 05:08:58 PM
Post by: Bob33 on July 20, 2016, 05:22:36 PM
Post by: hughjorgan on July 20, 2016, 05:26:35 PM
Post by: police women of America on July 20, 2016, 05:36:17 PM
Clicks? How many turns did you put in the limb bolts? The owners manual will give you a guesstimate of how many pounds a full turn will increase your draw weight for your particular bow.... What bow are you shooting?By clicks I meant turns. And like I said it was 5 then 8, so 13 in all. It's a Quest Radical and the manual is about 3 pages with only instructions, but no detail about how to know the draw weight.
Post by: tjthebest on July 20, 2016, 06:12:45 PM
Also, to check weight you use the scale but you check the highest poundage as you are pulling it back. Not the weight when it is all the way pulled back.
Post by: hughjorgan on July 20, 2016, 06:39:58 PM
Post by: police women of America on July 20, 2016, 06:40:37 PM
13 turns sounds incorrect. Are you sure you are turning the limb bolt and not something else? Just tighten the limb bolts all the way down and you should be at max weight.Yes it is the limb bolts I'm adjusting. I have about half left before it's at the max, I'm guessing 15-20 turns. The bow goes from 15-70 pounds so it takes a lot of turns I'm guessing, just not sure how much weight it is each turn. And my only problem with setting it to the max is I don't think I could handle that weight and I'd be in the same situation as I am now.
Also, to check weight you use the scale but you check the highest poundage as you are pulling it back. Not the weight when it is all the way pulled back.
Post by: police women of America on July 20, 2016, 06:43:54 PM
How much thread is showing between your riser and limbs, I would think you would be bottomed out with that many turns... Is there a pro shop you can visit and have them do it for you. Make sure your arrows are still spined correctly for your draw weight change as well.I've got about half left. I guess I could take it to Cabelas, but that would be another couple weeks before I could go. I just really wish they made this whole process a lot easier.
Post by: hughjorgan on July 20, 2016, 06:56:09 PM
How much thread is showing between your riser and limbs, I would think you would be bottomed out with that many turns... Is there a pro shop you can visit and have them do it for you. Make sure your arrows are still spined correctly for your draw weight change as well.I've got about half left. I guess I could take it to Cabelas, but that would be another couple weeks before I could go. I just really wish they made this whole process a lot easier.
Did you loosen the pocket screw before tightening down the limb bolt? And you tightened both limb bolts equally?
Post by: police women of America on July 20, 2016, 07:02:02 PM
Yes. But that was another question I was going to ask, do I tighten it right after adjusting the weight or do I tighten it after I weigh the draw? So fare I assume you tighten it back up after adjusting the weight.How much thread is showing between your riser and limbs, I would think you would be bottomed out with that many turns... Is there a pro shop you can visit and have them do it for you. Make sure your arrows are still spined correctly for your draw weight change as well.I've got about half left. I guess I could take it to Cabelas, but that would be another couple weeks before I could go. I just really wish they made this whole process a lot easier.
Did you loosen the pocket screw before tightening down the limb bolt?
Post by: hughjorgan on July 20, 2016, 07:04:52 PM
Post by: police women of America on July 20, 2016, 07:06:31 PM
Tighten the pocket screw before putting it on the scale.Thanks!
Post by: pianoman9701 on July 21, 2016, 08:12:03 AM
Post by: police women of America on July 21, 2016, 10:25:56 AM
You might PM Radsav. He's a Bear guru. And, find a pro shop and develop a relationship.Thanks! I'll do that
Post by: Redbeard on July 23, 2016, 08:58:16 PM
Post by: police women of America on July 26, 2016, 11:17:42 AM
Post by: police women of America on July 28, 2016, 01:23:54 PM
We couldn't figure out what the draw weight is set to. But I was able to return the scale to Cabelas. And now I guess I'll just have to get a big expensive one to figure out what it's set to.
The thing I don't get is why can't they have the weight marked by each turn? I mean if they can number the draw length why not the draw weight? :dunno: The first person to put that on a bow will be a millionaire.
Post by: HUNTINCOUPLE on July 28, 2016, 01:33:59 PM
UPDATE:
We couldn't figure out what the draw weight is set to. But I was able to return the scale to Cabelas. And now I guess I'll just have to get a big expensive one to figure out what it's set to.
The thing I don't get is why can't they have the weight marked by each turn? I mean if they can number the draw length why not the draw weight? :dunno: The first person to put that on a bow will be a millionaire.
Most bows spec out approx how many lbs per turn of the limb bolts in and out. Say one turn 2lbs and so on. A bow scale is a very important piece of equipment for your archery box.
Post by: tjthebest on July 28, 2016, 01:41:11 PM
13 turns sounds incorrect. Are you sure you are turning the limb bolt and not something else? Just tighten the limb bolts all the way down and you should be at max weight.
Also, to check weight you use the scale but you check the highest poundage as you are pulling it back. Not the weight when it is all the way pulled back.
Remember that you are not measuring the weight when you are at full draw. You need to measure the peak(highest) weight during the draw cycle.
Post by: theleo on July 28, 2016, 03:02:34 PM
UPDATE:Because if they did it would be a lie anyway. If you went to a shop and started pulling 70 pound bows off the wall and checking their max weight, I'd bet you money maybe only one out of ten really has a peak draw weight of 70 pounds. Most bows end up being a few pounds heavier than the draw weight they're supposed to be.
The thing I don't get is why can't they have the weight marked by each turn?
Post by: police women of America on July 28, 2016, 10:11:06 PM
Ohhh, interesting.UPDATE:Because if they did it would be a lie anyway. If you went to a shop and started pulling 70 pound bows off the wall and checking their max weight, I'd bet you money maybe only one out of ten really has a peak draw weight of 70 pounds. Most bows end up being a few pounds heavier than the draw weight they're supposed to be.
The thing I don't get is why can't they have the weight marked by each turn?
Post by: police women of America on July 28, 2016, 10:13:18 PM
Yeah I guess I'll have to get a really nice one this time.UPDATE:
We couldn't figure out what the draw weight is set to. But I was able to return the scale to Cabelas. And now I guess I'll just have to get a big expensive one to figure out what it's set to.
The thing I don't get is why can't they have the weight marked by each turn? I mean if they can number the draw length why not the draw weight? :dunno: The first person to put that on a bow will be a millionaire.
Most bows spec out approx how many lbs per turn of the limb bolts in and out. Say one turn 2lbs and so on. A bow scale is a very important piece of equipment for your archery box.
Post by: lamrith on July 29, 2016, 12:03:09 PM
Also realize some limbs may not have a clean linear curve. 1 turn from 70# max may be 68#, an additional turn might be 65#, one more 60#.
One turn off my bow was 68#, two was 63#.
Sent from my SAMSUNG-SM-G870A using Tapatalk