Hunting Washington Forum
Community => Photo & Video => Topic started by: WASHBCBOOK on February 06, 2009, 07:11:27 PM
-
I HAVE ALL MY KIT FROM YETI FOR THE W80 AND W200 SAME KIT MY QUESTION IS WERE AND HOW DO I HOOK UP THE WIRES AND THE CORRECT SWITCHES TO USE IVE READ THE YETI SIGHT AND DOESNT MAKE SINCE IT WAY SAYING I NEED TO SOLDER A JUMP WIRE ON THE BACK OF THE BOARD PLEASE HELP PLEASE PLEASE IF ANY OF THE TOP TECH ON THIS HOMEBREW STUFF COULD CALL ME AND EXPLAIN IT I WOULS REALLY BE THANKFULTHANKS STEVE AKA WASHBCBOOK
-
The back of the board should have the jumpers done already. Turn all the switches but number 6 off. Turn on number 6. Then hook up the battery to the two pin battery connector. Red wire goes to the side with the white + on it. Then attach the camera to the 4 pin connector. This is clearly shown on the yeti site. Page 15 of this document shows the connections. Power is the red wire, Power Common is your ground wire, and the shutter wire is your shutter wire. Shutter common will not be used. Here is the manual for the boards.
http://yeticam.com/Manuals/YetiCamBoardVer13Manual14.pdf
-
I have read and re-read the post so many times my eyes are bleeding. But every time I do I pick up alittle more info. JUst don't try to read more onto it. Hope this helps!!
-
I HAVE ALL MY KIT FROM YETI FOR THE W80 AND W200 SAME KIT MY QUESTION IS WERE AND HOW DO I HOOK UP THE WIRES AND THE CORRECT SWITCHES TO USE IVE READ THE YETI SIGHT AND DOESNT MAKE SINCE IT WAY SAYING I NEED TO SOLDER A JUMP WIRE ON THE BACK OF THE BOARD PLEASE HELP PLEASE PLEASE IF ANY OF THE TOP TECH ON THIS HOMEBREW STUFF COULD CALL ME AND EXPLAIN IT I WOULS REALLY BE THANKFULTHANKS STEVE AKA WASHBCBOOK
Dude,
You really need to turn the CAPS off though. :tup: :tup:
-
SORRY oh no i did it again im learning but dont let the small things bug you
-
Did you get your questions answered? If so Perfect!
-
Thanks rick for your great help this site needs more people like you
