Post by: Sabotloader on August 10, 2017, 11:56:14 AM
It is aluminum jag with a Gold Iridite Anodized finish applied. With this finish the jag should not change colors as oxidation works on it. And just so you know the aluminum is 7075-T6 which is far better suited for the job than the normal 6061!
And if you might be wondering the ribbed middle section is to alleviate the potential of losing a patch on the up stroke as sometimes happens, these threads will grab the patch, not allowing it to roll down, bind up or fall off.
(https://s26.postimg.org/oeiv57c6x/Lehigh_Defense_ML_Jags.jpg)
This picture shows the older style jag with the oxidation working on the brass.
(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv130%2Fsabotloader%2FBH_Shoot1.jpg&hash=85041037f3a56b38d50e080eb6f0bc499e75fb21) (http://smg.photobucket.com/user/sabotloader/media/BH_Shoot1.jpg.html)
Not sure if it is on the web site yet but it should be should be shortly. And or they might show up on the Midway sight
I have used the older on many of my gun rods for hunting.
Post by: Sabotloader on August 29, 2017, 10:44:39 AM
https://www.lehighdefense.com/collections/muzzleloader/muzzleloader-rods
But check Midway first - they could be less expensive there...
Post by: grundy53 on August 29, 2017, 11:39:51 AM
Sent from my SM-G950U using Tapatalk