Post by: ghosthunter on December 10, 2017, 08:13:13 PM
Thinking about using one to power my kayak.
Lots of YouTube videos ,but I have questions if anyone has done this.
Post by: Reidus on December 10, 2017, 10:45:58 PM
Post by: Reidus on December 10, 2017, 10:49:43 PM
Post by: ghosthunter on December 10, 2017, 11:13:37 PM
I'm pretty sure they're not a deep cycle battery. They're made for short quick starting bursts. Probably work to some extent but definitely not Ideal.
Yeah, but I don't think I would be running down dead. 10 min run to end of the lake and back end of day. I could paddle, just thought would be easier in the wind.
Post by: ghosthunter on December 10, 2017, 11:20:05 PM
google "small deep cycle battery". All kinds of options. Compare amp hours to full size ones and you can probably guessitmate battery life.
I did google them. I am trying to save on weight. Even the small ones weight is 20 lbs.
Been running regular car batteries for years in my aluminum 12 ft boat with no problem. But only fishing and I don't troll so just in and out.
If I used the Jump Starter ,I was wondering if I had to protect the cable connections in any way.
One guy on you tube put a 12 volt plug on is motor and just plugged into the 12 volt outlet of the Jump Starter.
Post by: Alchase on December 12, 2017, 10:15:42 AM
Did that for many years before I got a "deep cycle" just for trolling.
Post by: Buckmark on December 12, 2017, 10:41:06 AM
If it does not work return it?
Post by: syoungs on December 12, 2017, 10:47:42 AM
google "small deep cycle battery". All kinds of options. Compare amp hours to full size ones and you can probably guessitmate battery life.
I did google them. I am trying to save on weight. Even the small ones weight is 20 lbs.
Been running regular car batteries for years in my aluminum 12 ft boat with no problem. But only fishing and I don't troll so just in and out.
If I used the Jump Starter ,I was wondering if I had to protect the cable connections in any way.
One guy on you tube put a 12 volt plug on is motor and just plugged into the 12 volt outlet of the Jump Starter.
The amperage draw will be above what the 12v plugs are designed to pass, could lead to issues and lower performance. I would go with something closer to whats in the link here, sized for whatever size cable you will be using. I have used bigger verisons of these on my winches, and made jumper cables with these on one end so I don't have to pop my hood to jump someone, and my cables are useless to most people. ( stops friends from "borrowing" them)
https://www.amazon.com/Battery-Connect-Disconnect-Connector-Recovery/dp/B01KHQR0K4/ref=sr_1_sc_1?ie=UTF8&qid=1513104346&sr=8-1-spell&keywords=forkift+connection
for a quick 10 min run I think you'll be ok with most battery jump starters, though using them in this fashion will limit the life of them for sure. I have seen small 12v deep cycle batteries for motorcycle use in the past, that may be a better option for longevity, though more expensive.