Hunting Washington Forum

Equipment & Gear => Archery Gear => Topic started by: Lowedog on March 08, 2009, 08:37:29 PM

Title: Bohning Blazer Fletching Jig....
Post by: Lowedog on March 08, 2009, 08:37:29 PM: Bought the Bohning fletching jig for 2" Blazer vanes and just thought I would share how well it works. It puts a nice 3 degree helix on the Blazers and is super easy to use. Vanes turned out looking and flying really sweet.

(https://hunting-washington.com/cpg/albums/userpics/10258/IMG_7704.JPG)
(https://hunting-washington.com/cpg/albums/userpics/10258/IMG_7705.JPG)

-Lowedog
Title: Re: Bohning Blazer Fletching Jig....
Post by: archery288 on March 08, 2009, 09:54:26 PM: Nicely done! What type of glue are you using on your blazers?
Title: Re: Bohning Blazer Fletching Jig....
Post by: Lowedog on March 08, 2009, 10:18:45 PM: I'm using Maxi-Cure cyanoacrylate. It's really strong and sets up super fast. I haven't lost a vane because of the glue failing in the 2 years I have been using it.

-Mark
Title: Re: Bohning Blazer Fletching Jig....
Post by: firecrotch on March 09, 2009, 12:18:08 AM: are those cheetahs your shootin?
Title: Re: Bohning Blazer Fletching Jig....
Post by: Lowedog on March 09, 2009, 04:29:48 AM: Quote from: firecrotch on March 09, 2009, 12:18:08 AM
are those cheetahs your shootin?

No, they are CX Maxima Hunters
Title: Re: Bohning Blazer Fletching Jig....
Post by: firecrotch on March 09, 2009, 01:51:08 PM: o ok well looks like a good setup i like it
Title: Re: Bohning Blazer Fletching Jig....
Post by: fc2038 on March 11, 2009, 06:43:10 PM: Were did you get the jig? Looks like some nice work
Title: Re: Bohning Blazer Fletching Jig....
Post by: Ironhead on March 11, 2009, 07:22:18 PM: Those look sweet Lowedog, I have been wanting to buy that jig.
Title: Re: Bohning Blazer Fletching Jig....
Post by: Lowedog on March 12, 2009, 02:02:21 PM: Quote from: fc2038 on March 11, 2009, 06:43:10 PM
Were did you get the jig? Looks like some nice work

I got it off ebay. There are several ebay stores selling them.

-Lowedog
Title: Re: Bohning Blazer Fletching Jig....
Post by: fc2038 on March 16, 2009, 06:58:18 PM: Thanks for the info
Title: Re: Bohning Blazer Fletching Jig....
Post by: @RCHER on March 17, 2009, 02:35:15 PM: Good post, LD. I'm ready for a change myself. I've been using the same AZ EZ Fletch for almost 20 years. It's okay, but now that I'm shooting carbons and 2" blazers, I'd like an updated setup. I'll be at Cabela's over the next couple weeks. I'll check it out.