Hunting Washington Forum

Equipment & Gear => Archery Gear => Topic started by: Vo2max on July 03, 2018, 09:57:09 PM

Title: Archers advantage- need help
Post by: Vo2max on July 03, 2018, 09:57:09 PM: For my arrow length using archers advantage, do I use the length of the carbon shaft or the length of the arrow from tip to nock notch?

Thanks in advance.

Erik
Title: Re: Archers advantage- need help
Post by: shallowforks on July 03, 2018, 10:06:29 PM: pretty sure its shaft only
Title: Re: Archers advantage- need help
Post by: northwesthunter84 on July 03, 2018, 11:25:39 PM: Throat of the nock to the end of carbon, don’t include the outsert if used and leave the point off too. I’ve been messing with it for my fast Eddie sight so let me know if you have any ?s
Title: Re: Archers advantage- need help
Post by: shallowforks on July 04, 2018, 07:31:48 AM: Double checked, it says right in the help section to measure bare shaft only no part of nock or insert. (This is for plugging numbers into archers advantage only. When purchasing shafts or talking about arrow length with arrow manufacturers you would measure from valley of nock to end of shaft.
Title: Re: Archers advantage- need help
Post by: Vo2max on July 05, 2018, 11:41:50 PM: Man, I feel like an idiot... I should have seen that! So sorry to ask when it says it clearly in the help section

Erik
Title: Re: Archers advantage- need help
Post by: Vo2max on July 05, 2018, 11:43:40 PM: Now I can’t seem to get the spine meter to be dead center as I have in the last with the same arrow, weight, bow etc. I think I’ll have to monkey around some more!
Title: Re: Archers advantage- need help
Post by: shallowforks on July 09, 2018, 01:48:15 PM: Yea i always play around with tve arrow length to get the perfect spine
1/16” at a time