Hunting Washington Forum
Equipment & Gear => Archery Gear => Topic started by: Clark33 on March 24, 2009, 07:21:40 PM
-
I got my 08 bowtech general a few days ago. I really like how smooth and quiet it is, but i am a little confused by the fps I am getting. Here are my bow stats:
Draw Length: 29.5"
Draw Weight: 70#
Total arrow weight: 366 grains with 2" Blazer vanes
Rest: Vaportrail drop away rest
No limb suppressors or string suppressors.
Right now the chrono we have says i am shooting 265fps.
Shouldn't this bow be shooting in the mid 280s fps with this set up? May be the chrono we are using but I don't think it would be that off.
-
It sounds a little slow, have you checked the poundage on a scale and how far away from the crono are you?
My black ice with 29"/70lb draw will shot 420+gr arrows around 280fps and the general has about the same IBO speed. Make sure everything is tuned right and try shooting a different bow though the crono, I have seen them throw bad #'s and some times not even read :twocents:
Forgot
What mods does the bow have? if its the smooth mods then its about right.
-
Took my arrow in and had it weighed at grizzly archery, turns out it weighs 415 grains :DOH: It all makes more sense now lol
-
So your around Yakima I take then. :dunno:
-
I go to CWU but am home in Naches for spring break. So yep, basically Yakima
-
A friend of mine is shooting a general with about the same results you have. I shoot a Mathews Drenalin 29in draw at 70# chrony at 279. We also chronyed a Hoyt Katera @ 70#, it shot 290 with a carbon arrow, not sure on exact weight of the arrow.
-
My general is set at 28" draw, 71# with an arrow that is 420 grains. It also has the smooth mods on it and the chronograph said it was shooting right around 260 fps.
-
You have to go with speed mods, with speed mods you should hit 280- 290fps with 366gr arrow, my Allegiance is set at 72lbs has speed mods and shoots 468gr arrow at 284fps.
-
Is there any noticeable difference in noise or vibration between the two mods that you have noticed?