Hunting Washington Forum

Equipment & Gear => All Other Gear => Topic started by: Billy74 on October 02, 2020, 06:54:03 PM


Advertise Here
Title: Camp chef alpine and alaknak
Post by: Billy74 on October 02, 2020, 06:54:03 PM
I thought i researched enough but i just opened up my camp chef and measured the top pipe and its 6”. The base at the stove was 5”.  I never checked because ive read quite a few reviews with this stove being used in the alaknak (5”).  Can anyone confirm if the 6” camp chef chimney fits or not in the Alaknak 


Sent from my iPhone using Tapatalk
Title: Re: Camp chef alpine and alaknak
Post by: gutsnthegrass on October 05, 2020, 08:42:29 AM
This is a great question, I have the same setup that I'm going to be using for the first time this year.  I hope that the taper will fit at the roof penetration.
Title: Re: Camp chef alpine and alaknak
Post by: gutsnthegrass on October 05, 2020, 09:15:19 AM
Billy, I'm not sure if you have already done it or not, but make sure you do a pre burn to season the paint on the stove.  Mine smoked pretty good for quite awhile.
Title: Re: Camp chef alpine and alaknak
Post by: D-Rock425 on October 05, 2020, 09:58:11 AM
In ave same stove in my bighorn tent.  I imagine it's the same size.
Title: Re: Camp chef alpine and alaknak
Post by: Billy74 on October 05, 2020, 11:17:21 AM
Ill do a test fit this weekend.  Im thinking the hole is a lot lower than i thought initially.  Looks like it will be the 2nd or 3rd section of pipe


Sent from my iPhone using Tapatalk
Title: Re: Camp chef alpine and alaknak
Post by: predatormode on October 13, 2020, 01:07:29 PM
The pipe will fit just fine, I put the smallest/first section on my stove, then I put
The rest of the pipe together outside the tent and feed it from the top, it will fit nice and snug and keep rain/snow from dripping down your pipe. The pipe gets bigger in diameter as it goes up


Sent from my iPhone using Tapatalk
SimplePortal 2.3.7 © 2008-2025, SimplePortal