Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: Tenkara on January 31, 2021, 03:32:37 PM

Title: H4350 for .223 reloading?
Post by: Tenkara on January 31, 2021, 03:32:37 PM: Anyone use it? Any info for starting point with this appreciated.
Title: Re: H4350 for .223 reloading?
Post by: Bill W on January 31, 2021, 04:43:03 PM: my thoughts are this powder is way too slow in a .223.
Title: Re: H4350 for .223 reloading?
Post by: b23 on January 31, 2021, 05:02:49 PM: Even with the heaviest for caliber bullets like the 90 grainers and stretched way out to give yourself as much usable case capacity as possible H4350 is just to slow for this application and I don't think you could get enough of it in the case to get up into usable operating pressures without causing yourself issue.
Title: Re: H4350 for .223 reloading?
Post by: NRA4LIFE on January 31, 2021, 05:05:03 PM: Same here, too slow. Hodgdon's site doesn't even have any load data for the .223. I don't know where you'd start.
Title: Re: H4350 for .223 reloading?
Post by: JimmyHoffa on January 31, 2021, 05:09:59 PM: probably start with a 48" barrel
Title: Re: H4350 for .223 reloading?
Post by: jrebel on January 31, 2021, 05:49:28 PM: If that is the only powder you have, I would start by offering it up for trade for another powder better suited for .223. H4350 is very sought after and you could likely get a 2 to one trade as it is usually more expensive and harder to find than .223 powders.

I would not load .223 with it though to answer your question.
Title: Re: H4350 for .223 reloading?
Post by: Hilltop123 on January 31, 2021, 05:51:10 PM: Quote from: jrebel on January 31, 2021, 05:49:28 PM
If that is the only powder you have, I would start by offering it up for trade for another powder better suited for .223. H4350 is very sought after and you could likely get a 2 to one trade as it is usually more expensive and harder to find than .223 powders.

I would not load .223 with it though to answer your question.
:yeah:
Title: Re: H4350 for .223 reloading?
Post by: Tenkara on January 31, 2021, 05:53:48 PM: Appreciate the answers, what is you guys preferable powder for this?
Title: Re: H4350 for .223 reloading?
Post by: JimmyHoffa on January 31, 2021, 05:56:49 PM: I like H322.
Title: Re: H4350 for .223 reloading?
Post by: jrebel on January 31, 2021, 06:05:30 PM: Quite a few to pick out of....here is a list off Hodgkin s site for 55 grain pills.
Title: Re: H4350 for .223 reloading?
Post by: yorketransport on January 31, 2021, 06:10:29 PM: 25gr of H4350 will work with almost any weight flat base bullet in a 223. The load will be pretty compressed and the velocity will be around 2500-2550 fps in a 20" barrel with every bullet weight. It's a very low pressure load and might not cycle in a gas gun. Works great in single shots and bolt guns though.
Title: Re: H4350 for .223 reloading?
Post by: Jingles on February 01, 2021, 05:29:35 AM: I like either H335 or RE 7, both provide excellent results. With both 55 grain and 62 grain (ss109) projectiles
Title: Re: H4350 for .223 reloading?
Post by: Bill W on February 01, 2021, 07:25:18 AM: Quote from: Tenkara on January 31, 2021, 05:53:48 PM
Appreciate the answers, what is you guys preferable powder for this?

I would ask "what does the book show for a range of suitable powders"? Usually there's a list in the book from fastest to slowest that will work for a given bullet weight.
Title: Re: H4350 for .223 reloading?
Post by: zwickeyman on February 01, 2021, 07:25:34 AM: I use A2230 and H4895 in my AR in 223 with 60 gr Vmax's
Title: Re: H4350 for .223 reloading?
Post by: b23 on February 01, 2021, 10:05:11 AM: I mostly shoot lighter to mid weight bullets in my 223's or 223AI and Benchmark or H322 are my "go to" powders but there is a ton of powders that work well for the 223.

There are some powders like Win748 or CFE223 that work well across the board from light to heavy bullets. The first AR I had back in the mid 80's Win748 was the only powder I used with a variety of different brand and weight bullets and that old AR with Win748 and about any bullet I put through it loaded to whatever the book suggested shot as well as any I've had. With all the new powders out and Win748 being an old ball powder it's not all that popular these days so it may be one of those powders you can find available and it does work very well in 223's with nearly all of the bullets weights. Just be mindful to maybe stay below max load if you're working up a load in 20 degree temps and plan to shoot the same load when it's 100 degrees out because Win748 isn't a temp stable powder but then again many of them aren't.
Title: Re: H4350 for .223 reloading?
Post by: Fl0und3rz on February 02, 2021, 03:55:22 AM: Lots of good recommendations in this thread.

Some other good info here.

http://www.natoreloading.com/556/