Hunting Washington Forum

Big Game Hunting => Bow Hunting => Topic started by: Dreaded Archer24 on June 12, 2024, 10:54:35 AM


Advertise Here
Title: Broadhead weight
Post by: Dreaded Archer24 on June 12, 2024, 10:54:35 AM
Hey guys I was wondering what grain  y’all use for broad heads when hunting deer.? And what brand y’all use?
Title: Re: Broadhead weight
Post by: High Climber on June 12, 2024, 11:05:22 AM
Lots of good heads out there. I use 100 grain fixed blades. Going to use QAD Exodus this season
Title: Re: Broadhead weight
Post by: mburrows on June 12, 2024, 11:27:08 AM
Gonna depend completely on your overall bow and arrow tuning program. I shoot 100gr iron wills with 75gr brass insert up front. Look up an arrow spine chart based on your draw weight, draw length and recommended point weight that will help tell you what you should shoot.
Title: Re: Broadhead weight
Post by: fowl smacker on June 12, 2024, 12:17:14 PM
I run 125 gr Slick Trick magnums.  Great broadheads and fly exactly like my field points.
Title: Re: Broadhead weight
Post by: pianoman9701 on June 12, 2024, 12:24:38 PM
@RadSav

Radical Archery broad heads, a sponsor on here, are exceptional products with devastating results. I've used them for well over a decade and have never had to track an animal for more than 20-30 yards. My last blood trail on a blackie looked like the Manson murders. I use the 125gr Rival.
Title: Re: Broadhead weight
Post by: MeepDog on June 12, 2024, 01:31:26 PM
If you want a heavier arrow set up with a normal weight broadhead, consider getting a heavy brass insert like was previously mentioned. I use a 125gr Magnus stinger with a 100 grain brass insert. All the magnus broadheads are great. They have a lifetime warranty and are designed well. I've seen one break a leg bone and continue to pass through.
Title: Re: Broadhead weight
Post by: Dreaded Archer24 on June 12, 2024, 01:35:27 PM
@RadSav

Radical Archery broad heads, a sponsor on here, are exceptional products with devastating results. I've used them for well over a decade and have never had to track an animal for more than 20-30 yards. My last blood trail on a blackie looked like the Manson murders. I use the 125gr Rival.
I’ll look them up for sure  I heard they were pretty good it’s nice to hear a second to that notion. Right on


Sent from my iPhone using Tapatalk
Title: Re: Broadhead weight
Post by: Dreaded Archer24 on June 12, 2024, 01:38:39 PM
If you want a heavier arrow set up with a normal weight broadhead, consider getting a heavy brass insert like was previously mentioned. I use a 125gr Magnus stinger with a 100 grain brass insert. All the magnus broadheads are great. They have a lifetime warranty and are designed well. I've seen one break a leg bone and continue to pass through.
I have a 75 grain inserts that I’m running I’m sure the 25 grain would make a difference as far as having 100 grain insert - 75 grain. I wouldn’t think the broadhead would break.


Sent from my iPhone using Tapatalk
Title: Re: Broadhead weight
Post by: Klickitatsteelie on June 12, 2024, 06:34:45 PM
I run a 50 grain insure with a 100 grain sevr 2.0” and it is wicked.
Title: Re: Broadhead weight
Post by: hollymaster on June 12, 2024, 07:33:21 PM
I run 125 gr Slick Trick magnums.  Great broadheads and fly exactly like my field points.
This :yeah:
Title: Re: Broadhead weight
Post by: kodiak06 on June 12, 2024, 09:58:55 PM
125gr BH's with a 42gr bras insert on both my setups. Slick Trick Magnums with one bow and Slick Trick Vipertricks with the other
Title: Re: Broadhead weight
Post by: Caveman123 on June 12, 2024, 10:03:23 PM
64 grain insert 100 grain montec g5
Title: Re: Broadhead weight
Post by: hughjorgan on June 12, 2024, 10:05:34 PM
100 grain, 50 grain brass insert and a slick trick magnum
Title: Re: Broadhead weight
Post by: Doublelunger on June 12, 2024, 10:36:09 PM
Get ready for 1000 different responses. If you shoot them in the heart with a field point they die.
Title: Re: Broadhead weight
Post by: Klickitatsteelie on June 13, 2024, 05:43:16 AM
Get ready for 1000 different responses. If you shoot them in the heart with a field point they die.
That is absolutely correct.
Title: Re: Broadhead weight
Post by: Tracker0721 on June 13, 2024, 09:04:37 PM
250 grain cutthroat with a 50 grain insert. Trad bow, falls like a rock out of the compound 😂
Title: Re: Broadhead weight
Post by: elksnout on June 16, 2024, 09:27:55 PM
Guess my heads been in the sand. Whats with weighted brass inserts? Always just purchased arrows and inserts to fit. So I’m assuming that they come in different weights and are used to gain arrow weight without the added cost of purchasing heavier broadheads?

elksnout
Title: Re: Broadhead weight
Post by: trophyhunt on June 17, 2024, 04:10:43 AM
Guess my heads been in the sand. Whats with weighted brass inserts? Always just purchased arrows and inserts to fit. So I’m assuming that they come in different weights and are used to gain arrow weight without the added cost of purchasing heavier broadheads?

elksnout
same w me, no clue what my inserts weigh?  I shoot 100 grn shuttle T’s and they are devastating, huge hole. 
Title: Re: Broadhead weight
Post by: blackveltbowhunter on June 17, 2024, 05:37:52 AM
Generally weighted inserts are used to add more overall weight to the arrow and specifically
to increase the weight in the arrow tip or front and find a sweet spot for arrow flight.

Depending on the arrow makes and models insert weight vary, but for most standard diameter aluminum inserts weigh around 20ish grains.

I mostly use 125 currently, but 100s have killed me lots of critters that don't know the difference
Title: Re: Broadhead weight
Post by: MIKEXRAY on June 17, 2024, 06:41:59 AM
I shoot the G5 Stryker V2 in 125 gr and would never change. Fly true and have held together perfectly after shooting animals. I've had great results , as stated lots of right answers just find what works best for ur setup. Good luck.
Title: Re: Broadhead weight
Post by: mburrows on June 17, 2024, 09:32:41 AM
Guess my heads been in the sand. Whats with weighted brass inserts? Always just purchased arrows and inserts to fit. So I’m assuming that they come in different weights and are used to gain arrow weight without the added cost of purchasing heavier broadheads?

elksnout

Weighted inserts can do a few things. Add overall arrow weight, weaken spine to help with arrow tuning if necessary and improve FOC or arrow flight.

The brass inserts will screw into the bottom of your normal aluminum insert and yeah theyll typically come in 25gr, 50gr and 75gr

Title: Re: Broadhead weight
Post by: Tracker0721 on June 17, 2024, 07:12:13 PM
For trad bows and stump shooting the brass inserts add more strength over the cheap aluminum ones that come with arrows.
Title: Re: Broadhead weight
Post by: kodiak06 on July 08, 2024, 08:19:39 AM
I run 125 gr Slick Trick magnums.  Great broadheads and fly exactly like my field points.

Same here...
Title: Re: Broadhead weight
Post by: elksnout on August 16, 2024, 09:46:54 PM
My total weight of my hunting arrow is 462 grains with broadhead. My F.O.C is 9.5%. Setup flies well. Is 9.5% too light? Hunt elk only.


elksnout
Title: Re: Broadhead weight
Post by: D-Rock425 on August 17, 2024, 08:28:28 AM
My total weight of my hunting arrow is 462 grains with broadhead. My F.O.C is 9.5%. Setup flies well. Is 9.5% too light? Hunt elk only.


elksnout
to light to kill an elk?  No.  I really think the sweet spot for most of my set ups is about 12-16%.  I shoot a lighter arrow shaft like an Eason sonic and shoot 50 grain brass insert with a 125 grain head.
Title: Re: Broadhead weight
Post by: Carwash on December 03, 2024, 09:13:53 PM
Recommend 125gr min broadhead. I run 125gr Radical Madmans with a 260gr collar + insert. Overall arrow weight is 502gr. I may swap to the magnus stinger buzzcuts just for science, but I have zero issue with the madmans so far.
SimplePortal 2.3.7 © 2008-2025, SimplePortal