Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: fishingnut71 on December 13, 2009, 04:48:42 PM

Title: Glass beding?
Post by: fishingnut71 on December 13, 2009, 04:48:42 PM: is this better for accuracy? What is the diffference between glass beding and free floating? It sounds stupid but I gota know!
Title: Re: Glass beding?
Post by: C-Money on December 13, 2009, 04:56:15 PM: Glass bedding is filling in all holes and imperfections inside the stock. It gives the barrell and action a perfict "bed" to lay on. Works good!
Title: Re: Glass beding?
Post by: robescc on December 13, 2009, 04:59:13 PM: Free floating means that your barrel is not touching the stock at all. This is great for heavy contours but for most sporter and smaller contours, it is good to glass bed the barrel too :twocents:
Title: Re: Glass beding?
Post by: JackOfAllTrades on December 13, 2009, 04:59:41 PM: That act of glass bedding the action and free floating the barrel are usually one process.

Free floating, is making sure that no part of the barrel touches the stock forward of the chamber.

Glass bedding is creating a custom tight fit of the action in the stock. (not the same as gluing it in the stock)

Pillar beading is the act of glass bedding and creating sleaves for the action screws to tighten 'onto' as they are screwed into the action. The benefit of this is that you can torque the screws evenly without wood or composite stock flex.

http://www.stockysstocks.com/pdf/pillarbedding.pdf

http://www.scorehighgunsmithing.com/

Does this always lead to more accuracy? Quite often it does. But a bad barrel will not be more accurate from just bedding the action. An action that is 'easily' removed from the stock will usually benefit from a bedding and freefloating job.

-Steve