Hunting Washington Forum

Community => Photo & Video => Topic started by: top pin1 on April 02, 2010, 09:01:08 PM

Advertise Here

Title: sony w series camera software (photo Editing
Post by: top pin1 on April 02, 2010, 09:01:08 PM

Okay in a post about a year ago from BOBR. He mentioned that you could add the flash to pictures via the software that comes with the camera. I've bought a few of these on ebay and have copies of the cd that came with camera. Is the software BOBR talking about called "Picture Motion Browser". If so can someone tell me where you can add the flash to pictures? I'm not seeing it in any of the choices for editing pictures. It seems a pretty basic editing program and adding flash doesnt seem like a ability it has. Do I have the right program?

I'd ask BOBR but his Inbox has been full for 3 months.

Thanks

Top Pin

Here is the part of the post from BOBR 

http://hunting-washington.com/smf/index.php/topic,19183.msg221511/topicseen.html#msg221511 (http://hunting-washington.com/smf/index.php/topic,19183.msg221511/topicseen.html#msg221511)

 
"On automatic, the camera always sets the ISO for night flash pictures at 800. This flash with this ISO is good to about 20 feet. With ISO 400, the flash is good to about 10 feet, and ISO 100 is about 5 feet. The pictures are much clearer and sharper with the power ISO's, and the softer flash does not cause as much eye shine on the critters. You can add the flash to the pictures with the software. YOU NEED this software. I have made copies of this software for BigDave and bow4elk. If anyone else needs this send a PM with your address.
   Yeti board dipswitch settings. I run my cameras on rapid pics mode. All switches are off except # 6 is on. But this makes the camera take lots of pictures in a hurry. If you cannot check your camera often, you need to set the board for a longer delay.
Bob"