Hunting Washington Forum
Other Activities => Fishing => Topic started by: bowtech721 on April 07, 2010, 11:32:01 AM
-
When people talk about fishing the rivers at different flows i have a basic understanding of what they mean but what do you monitor... the median flow or the discharge? I have been looking at http://waterdata.usgs.gov/WA/nwis/current/?type=flow (http://waterdata.usgs.gov/WA/nwis/current/?type=flow)
-
I would look at current flows at the graph then compare that to the mean flows below the graph...
this one is of the skykomish at gold bar.
-
http://waterdata.usgs.gov/wa/nwis/uv/?site_no=12134500&PARAmeter_cd=00060,00065 (http://waterdata.usgs.gov/wa/nwis/uv/?site_no=12134500&PARAmeter_cd=00060,00065)
the median(average) is 3600cfs so right now the Sky at Gold Bar is at 2840 which is lower than average.
.
is this what you're wondering?
-
Ya pretty much... thanks for the example i was kinda also wondering what that typically would mean as far as fishing. Like if its above or below and how that affects the fishing.
-
my take...
Low water means clear water(usually) which means tougher fishing(usually) which also will limit the amount of fish coming up the river if you're talking about salmon or steelhead I guess. Once the water comes up a little and gets a little color, you'll get a little better fishing(less visibility/less line-shy fish) plus the increased flow will usually trigger fresh fish coming from the salt.
I will also say that if you ask 5 different fishermen you'll get 5 different opinions.
:chuckle:
This would all apply till the rivers are totally blown at which point all you can do is watch lumber floating down the river.
-
Makes sense
-
WHAT WOULD BE THE BEST WATER FLOW NUMBERS FOR THE SKY FOR EXAMPLE. IM SURE ALL RIVERS WOULD BE DIFFERANT