Hunting Washington Forum
Equipment & Gear => Guns and Ammo => Topic started by: hoyt5199 on October 29, 2010, 01:07:31 PM
-
Does anyone own this gun yet? I bought it in the 223 caliber and I was told by savage it takes #46 scope base mounts and a gun shop says it takes a 46 for the front and 61 in back. Any info on this situation.
-
Should be no problem to find bases for that rifle. Savage round top front and back bases. They are not the same base. There's a front and a back.
Same as for a regular old Savage with accutrigger.
-
I was able to put the mounts on but my scope will not seat right on the rings, would I need a different scope or am I doing something wrong
-
I was able to put the mounts on but my scope will not seat right on the rings, would I need a different scope or am I doing something wrong
I need more info.
There's bases and rings then your scope. Give us the specifics of everything you have and we'll see if we can put it together for you.
-
I have #46 and #61 bases, 1" weaver rings that fit up to a 40mm, and a nikon prostaff 3x9x40
-
Weaver bases too?
-
#46 is correct for the rear.
Your 61 is wrong I believe. It shows as the rear base on non-accutrigger models. I think you have 2 rear bases.
-
U know, actually I don't think that's what he gave me, I don't remember what kind and am not around to see
-
The guy told me 46 goes in the front,is is it possible to have 2 46 bases
-
you need 2 46's.
http://www.ordertree.com/cms/savage/11810.html (http://www.ordertree.com/cms/savage/11810.html)
10, 12, 110, 112 series, w/ AccuTrigger, Stevens 200 22
46 (48046)
$3.95
46 (48046)
$3.95
-
Thanks alot
-
So how does the edge shoot? Like it?
-
Check out the EGW one-piece picatinny base. I have one on my .308 Edge. A lot more versatile than standard mounts. :twocents:
http://egw-guns.com/store/index.php?main_page=product_info&products_id=495 (http://egw-guns.com/store/index.php?main_page=product_info&products_id=495)