Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: Rob on January 20, 2011, 11:18:11 AM

Title: Anyone got a source for rifle stocks for a 10/22?
Post by: Rob on January 20, 2011, 11:18:11 AM: I picked up an older reger 10/22 a while back and just updated the barrel to a .920 diameter barrel. I need to swap out to a new stock that can handle the wider barrel.

Midway, Brownells and Cabelas all have a large selection of 10/22 stocks, however what I really want is a nice looking solid wood stock, not a synthetic or laminate stock.

Does anyone know of a place that sells a decent selection of wooden 10/22 stocks?
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: quadrafire on January 20, 2011, 11:20:24 AM: You could easily rasp/sand the contour of the old stock to fit. Work slowly, but it is not hard
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: jackelope on January 20, 2011, 11:42:26 AM: Rob-
Do you want a stock that looks like the O/E stock or something a little more tricked out looking?

http://cgi.ebay.com/RUGER-10-22-FACTORY-LAMINATED-VARMINT-STOCK-/110631521302?pt=LH_DefaultDomain_0&hash=item19c2270c16 (http://cgi.ebay.com/RUGER-10-22-FACTORY-LAMINATED-VARMINT-STOCK-/110631521302?pt=LH_DefaultDomain_0&hash=item19c2270c16)

:dunno:

http://cgi.ebay.com/Ruger-10-22-NUTMEG-Yukon-Extreme-Stock-Custom-W-STUD920-/180604997683?pt=LH_DefaultDomain_0&hash=item2a0ce59033 (http://cgi.ebay.com/Ruger-10-22-NUTMEG-Yukon-Extreme-Stock-Custom-W-STUD920-/180604997683?pt=LH_DefaultDomain_0&hash=item2a0ce59033)
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: tritt007 on January 20, 2011, 11:53:15 AM: i would definetly try boyd's gunstocks, just look it up on google youll find it, very nice stocks reasonable prices.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: thinkingman on January 20, 2011, 12:04:47 PM: google Richards Microfit.
Guys on Rimfirecentral have used them.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: BlackRidge on January 20, 2011, 12:27:59 PM: +1 for Boyd's and Keystone

Here are some links so you can check them out

Boyd's 10/22 stocks (http://www.cabelas.com/product/Boyds-1022-SS-Evolution-Stock/741962.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3D10%252F22%2Bstock%26WTz_l%3DHeader%253BSearch-All%2BProducts&Ntt=10%2F22+stock&WTz_l=Header;Search-All%20Products)

Keystone 10/22 Extreme stocks (http://www.cabelas.com/product/Keystone-Sporting-Arms-Revolution-Extreme-1022174-Thumbhole-Stock/741641.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3D10%252F22%2Bstock%26WTz_l%3DHeader%253BSearch-All%2BProducts&Ntt=10%2F22+stock)

Keystone 10/22 Yukon stocks (http://www.cabelas.com/product/Keystone-Sporting-Arms-Revolution-Yukon-1022174-Thumbhole-Stock/741646.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3D10%252F22%2Bstock%26WTz_l%3DHeader%253BSearch-All%2BProducts&Ntt=10%2F22+stock)
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: carpsniperg2 on January 20, 2011, 12:40:24 PM: Boyd's are sweet. Sometimes gunbroker and ebay have some nice ones.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: Rob on January 20, 2011, 03:28:11 PM: Thanks for the leads, I'll check them out.

I was probably a bit unclear in my initial post, but I am not really looking for a laminate stock. I want a stock made of a single piece of wood as I am looking for a more traditional look and feel for this gun.

Good point about rasping out the stock to accommodate the larger barrel, however my question on that would be, what about the little retainer on the foreend of the stock that holds the barrel in? it is molded to a factory diameter barrel, and I would need one that would fit on the stock as well as above the barrel without any significant gaps (see photo).
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: jackelope on January 20, 2011, 03:33:48 PM: the .920 barrel setups don't use the barrel clamp. My 10/22 wood stock at home doesn't use a barrel clamp. If you could find a stock like that, that'd be the ticket. I have a nice wood stock I'd sell you if you're interested but it utilizes a barrel clamp if I remember correctly. The wood is a little nicer than normal though.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: jackelope on January 20, 2011, 03:36:31 PM: www.stockysstocks.com/...SOLID-WOOD...Riflestocks/Categories (http://www.stockysstocks.com/...SOLID-WOOD...Riflestocks/Categories)

Look at this link too. I don't know if it's any good because it's blocked by this dang firewall here at work. You might see something there.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: quadrafire on January 20, 2011, 07:45:25 PM: Quote from: Rob on January 20, 2011, 03:28:11 PM
Thanks for the leads, I'll check them out.

I was probably a bit unclear in my initial post, but I am not really looking for a laminate stock. I want a stock made of a single piece of wood as I am looking for a more traditional look and feel for this gun.

Good point about rasping out the stock to accommodate the larger barrel, however my question on that would be, what about the little retainer on the foreend of the stock that holds the barrel in? it is molded to a factory diameter barrel, and I would need one that would fit on the stock as well as above the barrel without any significant gaps (see photo).
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: stumprat on January 20, 2011, 08:16:55 PM: Check the classifieds on www.rimfirecentral.com (http://www.rimfirecentral.com)
Alot of nice stocks for sale there foor the 10/22
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: Rob on January 21, 2011, 08:46:01 AM: That rimfire site is GREAT.

tons of options in the classifieds too.

Thanks!
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: stumprat on January 21, 2011, 01:38:27 PM: You bet. Hope you find what your after.
Title: Re: Anyone got a source for rifle stocks for a 10/22?
Post by: quadrafire on January 24, 2011, 01:48:13 PM: Quote from: Rob on January 20, 2011, 03:28:11 PM
Thanks for the leads, I'll check them out.

I was probably a bit unclear in my initial post, but I am not really looking for a laminate stock. I want a stock made of a single piece of wood as I am looking for a more traditional look and feel for this gun.

Good point about rasping out the stock to accommodate the larger barrel, however my question on that would be, what about the little retainer on the foreend of the stock that holds the barrel in? it is molded to a factory diameter barrel, and I would need one that would fit on the stock as well as above the barrel without any significant gaps (see photo).

You don't need the barrel band. I took mine off and it shoots better. I just have the standard contour barrel, not the bull barrel