Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: Huntboy on March 09, 2012, 11:20:11 AM


Advertise Here
Title: Recipes for reloading for 300 RUM
Post by: Huntboy on March 09, 2012, 11:20:11 AM
Does anybody have any they currently use. And are you willing to share them.

Thanks, Scott
Title: Re: Recipes for reloading for 300 RUM
Post by: BULLBLASTER on March 09, 2012, 12:08:31 PM
Last year I was shooting 90 grains retumbo with 210 Berger CCI 250 and oal of 3.69 was a fairly mild load but shoots under 0.5 moa. I'm having some work done to my rifle and have some.215 Berger's loaded up for load development when it comes back. I couldn't get 200 accubonds and retumbo much under moa but didn't try all that hard. Ill save the 200 accubonds for my 06.
Title: Re: Recipes for reloading for 300 RUM
Post by: MDGrand on March 09, 2012, 12:10:29 PM
210 Berger VLD
Nosler Brass
Fed GM 215 primer
RL 25 - 87.9 grains
seated -0.02 from the lands

MOA for me.
Title: Re: Recipes for reloading for 300 RUM
Post by: hoyt2002 on March 10, 2012, 05:47:49 PM
165 gr. accubond
remington brass
remington 9m primers
90 grains of imr7828

In my rifle it shoots moa. I killed a buck and a spike bull with them this year. This is a max load in the Nosler loading book so start low and work you way up. good luck.
Title: Re: Recipes for reloading for 300 RUM
Post by: johnnyaustin44 on March 10, 2012, 07:15:05 PM
I shoot almost the same load as bullblaster with the exception of 180 grain nosler accubond instead of the Berger. shoots well outta my Browning
Title: Re: Recipes for reloading for 300 RUM
Post by: Huntboy on March 10, 2012, 09:34:15 PM
Thank you for the help, Gentlemen.
Title: Re: Recipes for reloading for 300 RUM
Post by: Jamieb on March 10, 2012, 10:39:44 PM
My rifle loves 95.5gr of retumbo under a 200gr accubond. 95,5gr is too much for a couple of freinds rifles but I'm not seeing any press. signs and the brass is lasting at least 10 fireings.
Title: Re: Recipes for reloading for 300 RUM
Post by: hunting4sanity on March 10, 2012, 11:33:50 PM
Remington 700 in 300RUM
Retumbo 90.8grs
Berger VLD 210grs
Fed 215M primers
Remington brass loaded to 3.665"
Title: Re: Recipes for reloading for 300 RUM
Post by: Huntboy on March 19, 2012, 08:22:55 AM
Anybody load imr 4350 for the 300 RUM.
Title: Re: Recipes for reloading for 300 RUM
Post by: Biggerhammer on March 19, 2012, 11:28:55 AM
165 gr. accubond
remington brass
remington 9m primers
90 grains of imr7828

In my rifle it shoots moa. I killed a buck and a spike bull with them this year. This is a max load in the Nosler loading book so start low and work you way up. good luck.

I bet that is one flat shooting load! :tup:  Your smoking that 165 out there.
Title: Re: Recipes for reloading for 300 RUM
Post by: JimmyHoffa on March 19, 2012, 11:37:09 AM
Remington brass
Primer Remington 9 1/2M
165 gr Swift Scirocco
101.2 gr Retumbo
Title: Re: Recipes for reloading for 300 RUM
Post by: BULLBLASTER on March 19, 2012, 11:45:38 AM
I have only tried retumbo in my rum. I use imr  4350 in most other calibers though. 243 7 mag and 30-06
Title: Re: Recipes for reloading for 300 RUM
Post by: Jamieb on March 19, 2012, 08:21:31 PM
IMR and H-4350 are too fast for the RUM
Title: Re: Recipes for reloading for 300 RUM
Post by: BULLBLASTER on March 20, 2012, 10:32:23 AM
IMR and H-4350 are too fast for the RUM
That's what I was thinking. But may work with light bullets. I like heavy bullets for my RUM.
Title: Re: Recipes for reloading for 300 RUM
Post by: high country on March 20, 2012, 10:42:59 AM
I use 7828 with good results when I was loading xlc's and sgk's. It produced good accuracy and velocity. My personal favorite load is 110gr 8700 under a 180tsx. It's a real pleasure in a 6lb gun too....lol.
Title: Re: Recipes for reloading for 300 RUM
Post by: Huntboy on March 20, 2012, 11:05:50 AM
In the new Nosler reloading manual, they said it worked real well with the lighter bullets. They show it for 165 and 180 gr., thinking about accubonds.
Title: Re: Recipes for reloading for 300 RUM
Post by: gadwall on March 21, 2012, 06:33:20 AM
Huntboy,

7828, 8700 and Retumbo are all good choices.  I will be starting with 7828 and a 180 Accubond to work up a load for a friends rifle this summer.  Good luck and let us know how yours shoots.

Title: Re: Recipes for reloading for 300 RUM
Post by: high country on March 21, 2012, 07:59:33 AM
You won't find any 8700. Accurate decided to kill it off, and I bought every bottle I could find. If you do find some....I only have a few pounds left.
Title: Re: Recipes for reloading for 300 RUM
Post by: buckhorn2 on March 21, 2012, 08:12:22 AM
My friend and I both load with H1000 his gun uses 891/2 and mine uses 92 with the 200 accubonds we have got good groups and has worked good for game.
SimplePortal 2.3.7 © 2008-2025, SimplePortal