Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: HairTrigger on March 11, 2012, 12:56:57 PM

Title: Here is my camo paint job!
Post by: HairTrigger on March 11, 2012, 12:56:57 PM: My Savage model 112 bull barrel,
Nikon Buckmaster 4.5X14
Had 4 or 5" cut off the barrel an still weighs 12#s
I used H.S. Specialties paint.
also used the painters blue tape to cover the numbers an glass.
Title: Re: Here is my camo paint job!
Post by: HairTrigger on March 11, 2012, 01:09:14 PM: :tup:
Title: Re: Here is my camo paint job!
Post by: HairTrigger on March 11, 2012, 01:10:31 PM: :tup:
Title: Re: Here is my camo paint job!
Post by: TwoSixFourWins on March 12, 2012, 08:55:50 AM: Looks pretty good! Nice idea with the tape over the numbers on the scope.
Title: Re: Here is my camo paint job!
Post by: HairTrigger on March 12, 2012, 11:34:53 AM: Thanks I put like three coats of paint on it, I even painted the inside part of the front of the scope in picture 6
Title: Re: Here is my camo paint job!
Post by: wraithen on April 01, 2012, 09:11:24 AM: I saw that paint inside and cringed until I read you did it on purpose. I remembered to mask over the scope numbers on mine but forgot about serial numbers on the gun :bash: Took quite a while to get the 3-4 coats off of the spot to read the s/n in order to register it on post. :chuckle: