Hunting Washington Forum

Big Game Hunting => Bow Hunting => Topic started by: Jimmy33 on December 17, 2017, 07:44:32 AM


Advertise Here
Title: Adjustment Screw
Post by: Jimmy33 on December 17, 2017, 07:44:32 AM
Anyone know how many pounds per revolution on the Mission Zone. Pulling 28”.


Sent from my iPhone using Tapatalk
Title: Re: Adjustment Screw
Post by: lokidog on December 17, 2017, 10:17:39 AM
It won't be a 1:1 ratio, as you tighten it down each turn will be either more or less of an increase, I would think.  You probably just have to try it and see. Unless you are talking about something other than the limb bolt/screw, I don't have one of those bows....
Title: Re: Adjustment Screw
Post by: Old Dog on December 17, 2017, 11:08:16 AM
I've been retired for a couple of years now, but for nearly 20 years I sold and serviced archery tackle.  In all that time I always figured 3 pounds per turn.  Brand didn't matter.  Of course I had a bow scale to double check, but it was rarely needed except to confirm. 
Title: Re: Adjustment Screw
Post by: WapitiTalk1 on December 17, 2017, 11:49:12 AM
Rec you contact Mission for the specifics.  And, there is a max amount of turns on the limb bolts (loosen/lighten) that most bow manufacturers recommends before unfortunate things happen  ;)
SimplePortal 2.3.7 © 2008-2024, SimplePortal