Hunting Washington Forum

Other Activities => Trapping => Topic started by: critterswanted on May 05, 2018, 10:30:48 PM


Advertise Here
Title: fleshing beams
Post by: critterswanted on May 05, 2018, 10:30:48 PM
i plan on redoing my fleshing beam. i am wounding how others have there beam set up and angel of there beam.
any ideas and suggestions would be greatly appreciated. 
Title: Re: fleshing beams
Post by: fatslinger on May 07, 2018, 11:13:36 PM
I have been using one that has a metal bracket mounted to the wall and the beam is removable when not being used. They are available at the summer rendezvous. It's really handy. Sorry, I can't post pictures to this site.
Title: Re: fleshing beams
Post by: Skyvalhunter on May 08, 2018, 05:13:29 AM
Welcome to the Forum
Title: Re: fleshing beams
Post by: lewy on May 08, 2018, 06:31:00 AM
Here’s my set up, built a base with a slotted key that will accept different size beams I made from plastic pipe. I played with the height and angle until it was comfortable for me.
Title: Re: fleshing beams
Post by: Machias on May 08, 2018, 09:07:10 AM
Nice lewy!
Title: Re: fleshing beams
Post by: critterswanted on May 10, 2018, 09:29:59 PM
thanks everyone.
Lewy what are the dimensions of your beams?
Title: Re: fleshing beams
Post by: Skyvalhunter on May 11, 2018, 05:18:52 AM
 :tup:
Title: Re: fleshing beams
Post by: AWS on May 25, 2018, 06:36:02 AM
here's one that I use coyote hunting as I don't get back home for weeks at a time.   It is a 2x6 with angle iron on the bottom.  The angle iron had multiple holes to adjust the angle when it hooks over the hitch.

https://imageshack.com/a/img924/9195/uY94eG.jpg
SimplePortal 2.3.7 © 2008-2024, SimplePortal