Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: Tenkara on January 10, 2021, 10:51:28 AM


Advertise Here
Title: ADG Brass
Post by: Tenkara on January 10, 2021, 10:51:28 AM
Anyone have any input them? im thinking about ordering some.
Title: Re: ADG Brass
Post by: Crunchy on January 10, 2021, 11:04:35 AM
I am on the 2nd firing of ADG brass and so far I very pleased.  An improvement over the Norma brass I was using.  It is thicker and heavier brass than Norma, so I suspect less volume, but performance has been good.
Title: Re: ADG Brass
Post by: Bushcraft on January 10, 2021, 11:05:16 AM
It's GTG.  You'll probably need to decrease the powder charge you've been using and regular annealing is VERY beneficial (critical) for maintaining consistent neck tension.
Title: Re: ADG Brass
Post by: b23 on January 10, 2021, 12:20:13 PM
I've also heard it's sometimes a little smaller on case volume and I think ADG even says something about this too.  Also been told by guys that have used it quite a lot it's pretty tough stuff and you can stand on it fairly hard without it giving up primer pockets which is good but can also be bad if you get drunk on chasing velocity too.
Title: Re: ADG Brass
Post by: NWShooter on January 20, 2021, 08:42:33 PM
It took seven firings with ADG .300 Win Mag brass before I had to kiss the shoulder with a die. Excellent stuff!
SimplePortal 2.3.7 © 2008-2024, SimplePortal