Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: KFhunter on March 06, 2021, 10:15:36 AM


Advertise Here
Title: P365 not locking slide back on last round (gen 1) **solved**
Post by: KFhunter on March 06, 2021, 10:15:36 AM
2  dfferent mags, same issue

Hornady critical defense and speer gold dot, same issue.

2 different shooters, both experts and 1 a trainer.


Ideas? It didn't lock 100% of the time.

Total round count less than 100



Title: Re: P365 not locking slide back on last round (gen 1)
Post by: wadu1 on March 06, 2021, 10:33:11 AM
I know some of the early one's had issues prior to 2018 or 19. It sounds like the magazines are not all the way in, they can lock in place and still be a tad short. I've got one 15 round mag for my 320 that wont stay open the others work fine. :twocents:
Title: Re: P365 not locking slide back on last round (gen 1)
Post by: TooTallMike on March 06, 2021, 10:35:30 AM
Check the spring tension on the slide release. If it's wonky then it might not be letting the mag follower push it completely up on the last round and letting the slide slip through.

Just a thought.

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: fishngamereaper on March 06, 2021, 11:30:52 AM
 Will it lock with an empty mag inserted if you pull the slide back. ?

That's test one for dirty/ broken parts. Or poor mag seating.

If it locks that way it's possible grip position is a causing factor during live fire. High, thumbs forward style grip will migrate to the slide release as a happy place for your thumbs.

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 06, 2021, 11:58:57 AM
Will it lock with an empty mag inserted if you pull the slide back. ?

That's test one for dirty/ broken parts. Or poor mag seating.

If it locks that way it's possible grip position is a causing factor during live fire. High, thumbs forward style grip will migrate to the slide release as a happy place for your thumbs.

The grip was watched by firearm instructor while firing and thumbs weren't hitting slide lock, he was watching for that specifically.


The slide works as normal, with empty mag it'll lock back,  but I can't recall if I was pushing up the slidelock button at the time with a thumb.  Habits.
Title: Re: P365 not locking slide back on last round (gen 1)
Post by: fishngamereaper on March 06, 2021, 12:02:06 PM
Will it lock with an empty mag inserted if you pull the slide back. ?

That's test one for dirty/ broken parts. Or poor mag seating.

If it locks that way it's possible grip position is a causing factor during live fire. High, thumbs forward style grip will migrate to the slide release as a happy place for your thumbs.

The grip was watched by firearm instructor while firing and thumbs weren't hitting slide lock, he was watching for that specifically.


The slide works as normal, with empty mag it'll lock back,  but I can't recall if I was pushing up the slidelock button at the time with a thumb.  Habits.

Does it lock on an empty mag without shooting it.
Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 06, 2021, 12:02:48 PM
Check the spring tension on the slide release. If it's wonky then it might not be letting the mag follower push it completely up on the last round and letting the slide slip through.

Just a thought.
I'll  check that

Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 06, 2021, 12:03:13 PM
Will it lock with an empty mag inserted if you pull the slide back. ?

That's test one for dirty/ broken parts. Or poor mag seating.

If it locks that way it's possible grip position is a causing factor during live fire. High, thumbs forward style grip will migrate to the slide release as a happy place for your thumbs.

The grip was watched by firearm instructor while firing and thumbs weren't hitting slide lock, he was watching for that specifically.


The slide works as normal, with empty mag it'll lock back,  but I can't recall if I was pushing up the slidelock button at the time with a thumb.  Habits.

Does it lock on an empty mag without shooting it.
Yes

Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 09, 2021, 10:44:57 AM
Empty mag function test, it locks back every time.

Dunno, wondering if my mag springs got weak.

I got a buddy that'll have the answer.

Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: fishngamereaper on March 09, 2021, 11:01:43 AM
Empty mag function test, it locks back every time.

Dunno, wondering if my mag springs got weak.

I got a buddy that'll have the answer.

Sent from my SM-G965U using Tapatalk

Forgot about this.

Ya pretty common for the mag springs to be one of the issues. Try a one round test. Load a round into the chamber and make sure the mag is empty. Shoot and see what happens.
Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 09, 2021, 11:09:52 AM
Empty mag function test, it locks back every time.

Dunno, wondering if my mag springs got weak.

I got a buddy that'll have the answer.

Sent from my SM-G965U using Tapatalk

Forgot about this.

Ya pretty common for the mag springs to be one of the issues. Try a one round test. Load a round into the chamber and make sure the mag is empty. Shoot and see what happens.
Just did that, it locked back as it should.

Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: fishngamereaper on March 09, 2021, 11:15:34 AM
Empty mag function test, it locks back every time.

Dunno, wondering if my mag springs got weak.

I got a buddy that'll have the answer.

Sent from my SM-G965U using Tapatalk

Forgot about this.

Ya pretty common for the mag springs to be one of the issues. Try a one round test. Load a round into the chamber and make sure the mag is empty. Shoot and see what happens.
Just did that, it locked back as it should.

Sent from my SM-G965U using Tapatalk

 :tup:

I would add a round at a time and see at what point the spring develops its weak memory at.
Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 09, 2021, 11:37:06 AM
I'm upgrading my mags with +2 springs, follower and floorplate

Make them 12rd mags with same concealment factor as the factory 10 rd with finger tab.  Slightly longer than the factory flush bottom plate, but I prefer having a home for my pinky finger anyways. 

(https://uploads.tapatalk-cdn.com/20210309/8776a4c045068bf15310447289a14c9b.jpg)

Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: KFhunter on March 09, 2021, 12:05:16 PM
Mag springs weak, def the problem.

Took apart the mags and the springs were not much longer then the mags themselves, 1 coil protruding instead of 3

Pulled on them a bit to lengthen them out, now they got more push.

Just did a full mag dump and it locked back, so problem found.

New mag springs are the solution, they're on order.


Stretching them a bit is temporary.

Sent from my SM-G965U using Tapatalk
Title: Re: P365 not locking slide back on last round (gen 1) **solved**
Post by: MountainWalk on March 09, 2021, 12:20:54 PM
Kinda along the same lines, but is there any truth to magazine springs losing strength  by staying loaded for long periods?

   I've only owned a few auto pistols. I have a Glock 10mm, and 6 mags. 3 stay loaded. Every other week I swap mags.
 Is this unnecessary? Thank you sirs.
Title: Re: P365 not locking slide back on last round (gen 1) **solved**
Post by: KFhunter on March 09, 2021, 12:26:54 PM
Kinda along the same lines, but is there any truth to magazine springs losing strength  by staying loaded for long periods?

   I've only owned a few auto pistols. I have a Glock 10mm, and 6 mags. 3 stay loaded. Every other week I swap mags.
 Is this unnecessary? Thank you sirs.
Yes, I've replaced all my G20 springs with +10% mag springs and load them fully minus 1 round.

I was having failures on the G20




Sent from my SM-G965U using Tapatalk

Title: Re: P365 not locking slide back on last round (gen 1)
Post by: Meatlover on March 10, 2021, 10:26:28 AM
I'm upgrading my mags with +2 springs, follower and floorplate

Make them 12rd mags with same concealment factor as the factory 10 rd with finger tab.  Slightly longer than the factory flush bottom plate, but I prefer having a home for my pinky finger anyways. 

(https://uploads.tapatalk-cdn.com/20210309/8776a4c045068bf15310447289a14c9b.jpg)

Sent from my SM-G965U using Tapatalk

I have a sig365 ms and I haven't had any issue with the slide so far.
Is there a reason you're getting the conversion to 12 rd mag instead of buying the 12 rd mag and still have that 10 rd to use? The price is almost the same. https://osagecountyguns.com/sig-sauer-mag-365-9-12.html
Title: Re: P365 not locking slide back on last round (gen 1) **solved**
Post by: KFhunter on March 10, 2021, 01:04:18 PM
Its the same thing, and my 10 rd springs are shot so I won't run em anyways....

But mostly it's because you didn't post that quick enough lol
SimplePortal 2.3.7 © 2008-2024, SimplePortal