collapse

Advertisement


Author Topic: Sighting in rifle  (Read 5136 times)

Offline blackpowderhunter

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Apr 2014
  • Posts: 1201
  • Location: Renton
Re: Sighting in rifle
« Reply #15 on: September 22, 2021, 09:09:40 AM »
i'd borrow a chronograph.
not saying your vel. is 2200 fps as calcs would suggest, but its hard to guess around velocity.
some barrels like something more than another, could be a funny batch of powder, whole bunch of stuff.
the weird part is that whatever velocity you're getting, they're grouping nicely  :chuckle: :dunno: :dunno:

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #16 on: September 22, 2021, 10:01:29 AM »
If you arent able to collect actual velocity data, you probably arent going to be able to resolve your issue.  In that case you may be well advised to buy a couple boxes of factory ammo for sight in and hunt until you have a chance to resolve the issues.  If the factory ammo does the same thing then you have other problems to resolve.   :twocents:

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #17 on: September 22, 2021, 10:17:57 AM »
Thanks I never had a issue before with factory ammo, just haven’t found any for over a year and half I have a custom cds dial for that specific ammo not sure if it would throw it off using different ammo with that cds dial .


Sent from my iPhone using Tapatalk

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #18 on: September 22, 2021, 10:35:42 AM »
If the velocity data you used for the dials doesnt match collected data from your handloads, you will be off your mark.  If your dials were cut from "box" data from your factory ammo, you may have the same problem, however if its close enough it wont show that much until 500 yards or more.

Ill add, yes, I have had CDS dials and have tested 2 rifles that both had them out to 650 yards.
« Last Edit: September 22, 2021, 10:46:05 AM by buckfvr »

Offline Damnimissed

  • Political & Covid-19 Topics
  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Dec 2013
  • Posts: 624
  • Location: Salmon, ID
Re: Sighting in rifle
« Reply #19 on: September 22, 2021, 08:55:43 PM »
FWIW, that is an extremely mild load for RUM. I don’t know anyone running under 90gr of Retumbo. I’m pushing 200gr AccuBonds at 3135fps with 92gr of Retumbo with no real pressure.

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #20 on: September 22, 2021, 09:10:14 PM »
I was just going off the Barnes load data it showed 86 grains as max, I called and talked to customer service he did say I can up it a bit just watch pressures . I did try 86 grains It just isn’t grouping like I am at 84 grains.


Sent from my iPhone using Tapatalk

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1170
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Sighting in rifle
« Reply #21 on: September 22, 2021, 09:26:55 PM »
No offense intended, but how much experience do you have with handloading?  Everyone starts somewhere. It's good that you are asking questions.  I recommend stopping what you're doing and asking a lot more questions.  ;)
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

 


* Advertisement

* Recent Topics

Fishing the East Cape in Baja? by jamesfromseattle
[Today at 09:57:19 AM]


Idaho youth Jr mentored hunter question. by jbuck
[Today at 09:54:27 AM]


Late Season Elk Unit 672 by Stubbornmoose
[Today at 08:56:11 AM]


Wasted Bethel bull by firepin
[Today at 08:25:00 AM]


My daughters first deer. by pashok23
[Today at 08:23:28 AM]


117 moose Nov. tags! by bearpaw
[Today at 08:15:57 AM]


F150 Ecoboost Guys by CP
[Today at 08:15:11 AM]


Any MT deer updates? by mburrows
[Today at 08:13:04 AM]


Big old and heavy by hunter399
[Today at 08:01:37 AM]


As He Lay by pianoman9701
[Yesterday at 09:01:46 PM]


Afraid of the Wasteways by crabcreekhunter
[Yesterday at 06:45:19 PM]


Roosevelt Elk. Please nudge me in the right direction. I feel hopeless. by Boss .300 winmag
[Yesterday at 06:08:51 PM]


FS Surbu BFG 50 by Tacticalhammer
[Yesterday at 06:03:47 PM]


East Side Quail Numbers? by metlhead
[Yesterday at 05:26:58 PM]


My Entiat Late tag thread by Timberstalker
[Yesterday at 04:12:48 PM]


Harlequin in weird places? by WildfireArcher
[Yesterday at 03:52:54 PM]


LINCOLN !! by cryder
[Yesterday at 02:54:21 PM]


Late huckelberry bull by shootnrun
[Yesterday at 11:52:52 AM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by pianoman9701
[Yesterday at 08:43:16 AM]


Youth mason tag…. Not going great by millerwheeler
[Yesterday at 06:44:23 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal