collapse

Advertisement


Author Topic: Honrady Bore Drive Eldx Performance  (Read 2866 times)

Offline Buck86

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2016
  • Posts: 64
  • Location: Tumwater
    • No
  • Groups: NRA
Honrady Bore Drive Eldx Performance
« on: October 21, 2023, 10:57:33 AM »
I decided to use these bullets this year.  I shot my bull at 162 yards, see post in elk hunting tread of quality mudflow bull.  Anyhow I know there has been a lot about good bullets etc. on here.  I wanted to give my experience from this season. I still use the Barnes 290 grain bullets and use the other Hornady 300 red saboted bullets for follow up loads.

As for these bullets they say they weigh 340 grains.  They do load easy as stated. and they seemed very accurate to me while shooting them during practice.  So, I shot my bull at 162 yards. he turned and laid down and before I was finished getting capped, he was sliding down the hill.  Upon getting to him and gutting and skinning I recovered the bullet. and that petal was in the top of the heart.  This bull looked like I shot him with a 300 win mag.  I have not in my experience seen that kind of trauma with a muzzleloader in the few bulls I have shot with my muzz. 3 so far.  All I can say is I was very impressed with the bullet performance. The recovered bullet and petal was 239.5 grains. so, it lost 100 grains, but went through both lungs and part of the heart and was on the offside under the hide.  I will try to post more pics

Offline Buck86

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2016
  • Posts: 64
  • Location: Tumwater
    • No
  • Groups: NRA
Re: Honrady Bore Drive Eldx Performance
« Reply #1 on: October 21, 2023, 10:59:10 AM »
More pics of performance

Offline JS444

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Dec 2013
  • Posts: 7
Re: Honrady Bore Drive Eldx Performance
« Reply #2 on: October 25, 2023, 04:33:07 PM »
I had similar results on my buck this year at 120yds. Hard quartering away shot when he stood up in his bed and he fell right back into it.  Impressed with their accuracy and terminal performance so far.

Offline Rob

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 4890
  • Location: Sandpoint ID
Re: Honrady Bore Drive Eldx Performance
« Reply #3 on: October 26, 2023, 07:00:10 AM »
I shot a Mulie last year - 325 yards with an ELD-X from my 6.5 Creedmoor.  Walked 10 steps and fell over dead.

I shot a bear this year with my 7mm RM  (175 ELDx).  I shot high and it put a hole thru the spine that was at least 1.5 inches in diameter. (approx 200 yards)

I am sold!

I especially like that Hornady did a great job keeping bullets available for reloaders during the covid derth.   
_______________________________________
Sit tall in the saddle, hold you head up high.
Keep your eyes fixed on where the trail meets the sky.
Live like you ain’t afraid to die.
Just sit back and enjoy your ride
  - Chris Ledoux

Online Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1967
Re: Honrady Bore Drive Eldx Performance
« Reply #4 on: October 27, 2023, 05:14:46 AM »
Are they easier to load than the SST's?  As easy as PB's?

Offline Buck86

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2016
  • Posts: 64
  • Location: Tumwater
    • No
  • Groups: NRA
Re: Honrady Bore Drive Eldx Performance
« Reply #5 on: October 27, 2023, 05:52:25 PM »
I think they are very easy to load and yes probably easier than the SST's I have no idea about PB I have never tried using those.   At the range for practice, they loaded very easy even after several shots. They load a lot easier than the Barnes with the blue T-EZ 290's. I should add that I use 110 grans of tapped down triple 7, this is my go-to load and just seems to work with whatever bullet I shoot.

Offline dub870

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Hunter
  • ***
  • Join Date: Oct 2010
  • Posts: 102
Re: Honrady Bore Drive Eldx Performance
« Reply #6 on: October 27, 2023, 09:18:41 PM »
I use the standard bore drivers for deer and like them. Load easily and shoot great. Only one deer so far and did not get much information on damage.

 


* Advertisement

* Recent Topics

First Bull! by BLH69
[Yesterday at 10:38:10 PM]


2025 Canning by finnman
[Yesterday at 10:23:07 PM]


Old Fred Bear Elk Hunt by cjjcb
[Yesterday at 08:57:42 PM]


Cow with pedicales by kodiak06
[Yesterday at 08:45:06 PM]


High Hunt by Ridgerunner
[Yesterday at 08:34:08 PM]


Eggs. by cjjcb
[Yesterday at 07:24:54 PM]


Mortgage Rates As Low As They've Been In A Year by Bareback
[Yesterday at 07:08:24 PM]


Vortex scope by hookr88
[Yesterday at 06:32:39 PM]


Cow Tag Special Permit - Need help or ideas by DeathMarch
[Yesterday at 05:16:03 PM]


Chronic wasting testing in NE Washington by hunter399
[Yesterday at 05:13:39 PM]


FFL preferences or warnings in Olympia or south Sound area? by Dirty Dingus Dave
[Yesterday at 04:26:59 PM]


Area 11 2025 - Well? by Mfowl
[Yesterday at 03:00:16 PM]


2025 NWTF South Sound Strutters Banquet by wadu1
[Yesterday at 01:36:41 PM]


Major Changes coming to Idaho for Non-Resident Hunters by teanawayslayer
[Yesterday at 12:06:13 PM]


Nosler vs Hornady by 10mmg
[Yesterday at 11:26:52 AM]


Roadless Rule Public Comment by steeleywhopper
[Yesterday at 10:54:38 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal