collapse

Advertisement


Author Topic: Ask RBros Thread  (Read 50972 times)

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 439
  • Location: Olympia, Wa
Ask RBros Thread
« on: August 22, 2016, 05:30:49 PM »
This is for questions regarding shooting, reloading, build advice, etc.........no ethics discussions please
R Bros Rifles
www.rbrosrifles.com

Offline jackelope

  • Administrator
  • Trade Count: (+23)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 43185
  • Location: Duvall, WA
  • Groups: WSB RMGA NRA RMEF BHA
Re: Ask RBros Thread
« Reply #1 on: August 22, 2016, 05:33:22 PM »
I'd like to know if you guys do any work on existing rifles. I.E. I have a Remington 700 Long Range and I think it shoots pretty good but I know it could be better. I had it shooting in the .8" range with factory HSM ammo and I'd like to know if there's anything you'd recommend doing to it to tighten those groups up and do you do stuff like that one someone else's rifle. Working up a load it shoots well is definitely in the plan, but what about things like bedding, trigger work, etc or do you only build rifles from the ground up? I'd also be interested in fluting the barrel and bolt just for that cool look. Curious to know your thoughts on that.

Thanks. This should be a good thread to follow.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline Karl Blanchard

  • Trade Count: (+10)
  • Old Salt
  • ******
  • Join Date: Aug 2008
  • Posts: 7695
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: Ask RBros Thread
« Reply #2 on: August 22, 2016, 05:35:27 PM »
Cool idea!  Dont really have any questions at the moment but always thirsty for knowledge feom guys like you.  Tagging along :hello:
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 439
  • Location: Olympia, Wa
Re: Ask RBros Thread
« Reply #3 on: August 22, 2016, 06:08:26 PM »
I'd like to know if you guys do any work on existing rifles. I.E. I have a Remington 700 Long Range and I think it shoots pretty good but I know it could be better. I had it shooting in the .8" range with factory HSM ammo and I'd like to know if there's anything you'd recommend doing to it to tighten those groups up and do you do stuff like that one someone else's rifle. Working up a load it shoots well is definitely in the plan, but what about things like bedding, trigger work, etc or do you only build rifles from the ground up? I'd also be interested in fluting the barrel and bolt just for that cool look. Curious to know your thoughts on that.

Thanks. This should be a good thread to follow.

From what I have seen on the Rem 700 LR Rifles, the following typically adds some improvement:
Skim Bed action and lug
Jewell Trigger
Brake and re-crown
Saddle cheekpiece

This is all stuff we can do.  I don't do any "accurizing" as some call it where they lap lugs, claim to true up the action and spin your barrel back on.  If your going to true the action, put a new barrel on it and really get the performance.


I wouldn't flute the barrel, a guy really wants to leave that up to the barrel manufacturers.  To big of a risk to have it go wrong.  Fluting the bolt is a pretty common thing however.  Its more cosmetic on Remingtons, but will reduce a little bit of weight.
R Bros Rifles
www.rbrosrifles.com

Online huntandjeep

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: May 2009
  • Posts: 2498
  • Location: West Valley , Yakima
Re: Ask RBros Thread
« Reply #4 on: August 22, 2016, 06:56:29 PM »
How long does it take to build a rifle ? Always wondered about the test targets builders show ?When you show test targets are those factory ammo or reloads , if reloads do all your rifles like the same recipe or do you work up a load for each individual rifle ?
Anyone that thinks a Glock is better than a 1911 paints his toenails.
Yakima Valley Mountaineers

Offline Bushcraft

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2008
  • Posts: 888
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Ask RBros Thread
« Reply #5 on: August 22, 2016, 06:58:08 PM »
Great idea for a thread!

Where is the best/correct place to measure sight height (center bore to center scope) when using a base with 20 MOA built into the base? And, how much does it really matter?
Liberalism is the philosophy of Western suicide. 

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 439
  • Location: Olympia, Wa
Re: Ask RBros Thread
« Reply #6 on: August 23, 2016, 05:23:16 AM »
How long does it take to build a rifle ? Always wondered about the test targets builders show ?When you show test targets are those factory ammo or reloads , if reloads do all your rifles like the same recipe or do you work up a load for each individual rifle ?

With the machining, stock fitting, bedding, coating, etc....there is usually about approx. 12-14hr per rifle.

Most of my test targets are with handloads, but some I use factory ammo with as well.  A lot of the 6.5 Creedmoors, 260's, 280AI's, and 338 Lapua's, I will use factory ammo with.

Now, here is the part that bugs me about other builders.  That charge they bill for "load development"....its a complete BS deal.  Just a way to get a little extra money for actually shooting the rifle.  The load recipe never changes from rifle to rifle.  In the last 10yrs the only thing that has changed is that I had to back down my charge weight on my 7 Mag load since Retumbo became a little faster burn rate in the last couple years.  Other than that, every rifle that I build runs the same loads and they are very well proven for accuracy.
R Bros Rifles
www.rbrosrifles.com

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 439
  • Location: Olympia, Wa
Re: Ask RBros Thread
« Reply #7 on: August 23, 2016, 05:30:30 AM »
Great idea for a thread!

Where is the best/correct place to measure sight height (center bore to center scope) when using a base with 20 MOA built into the base? And, how much does it really matter?

Here is an easy way to do it.  Lets use the following scenario:

You barrel shank is 1.25" diameter, so half that is: .625"
Your scope is a 30mm tube or 1.181", so half that is: .5905"
The distance from the top of your barrel at the recoil lug area to the bottom of the 30mm tube section is: .729"

Add those all together and you come up with 1.9445", round that to 1.95" and put that into you ballistic app.  A slight difference in height won't make that much difference, but if you leave it at the default number of 1.5" of most apps, you would be a bit off at distance using this example.
R Bros Rifles
www.rbrosrifles.com

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6036
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Ask RBros Thread
« Reply #8 on: August 23, 2016, 05:50:10 AM »
Tagging
243Round ct. 142
338rc 773
338 lapua rc 230
37XC rc 231
2020 Rifle rc 614

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline jkthomps

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 910
  • Location: Edmonds
Re: Ask RBros Thread
« Reply #9 on: August 23, 2016, 12:11:50 PM »
tagging in. I have a Rem 700 LR 300rum that may need your love.  :chuckle: :tup:

Why do you recommend a jewel triggers over timney triggers on the Rem 700s? 

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 439
  • Location: Olympia, Wa
Re: Ask RBros Thread
« Reply #10 on: August 23, 2016, 01:06:48 PM »
tagging in. I have a Rem 700 LR 300rum that may need your love.  :chuckle: :tup:

Why do you recommend a jewel triggers over timney triggers on the Rem 700s?

Overall they are a better trigger as long as they are adjusted correctly.  A Jewell will always feels crisper than a Timney no matter what the weight of pull is.
R Bros Rifles
www.rbrosrifles.com

Offline Gringo31

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2009
  • Posts: 5417
Re: Ask RBros Thread
« Reply #11 on: August 23, 2016, 01:12:00 PM »
 :tup:
We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker. It is time to restore the American precept that each individual is accountable for his actions.
-Ronald Reagan

Offline 2MANY

  • Political Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Jun 2013
  • Posts: 3218
  • Location: Yup
Re: Ask RBros Thread
« Reply #12 on: August 23, 2016, 01:22:44 PM »
I have a question for Travis.

Why the hell doesn't everyone just bite the bullet and buy a new RBros rifle????

JUST DO IT!!

Offline Bob33

  • Global Moderator
  • Trade Count: (+2)
  • Explorer
  • *****
  • Join Date: Apr 2009
  • Posts: 19418
  • Groups: SCI, RMEF, NRA
Re: Ask RBros Thread
« Reply #13 on: August 23, 2016, 01:48:26 PM »
How light could you make a rifle for big game that would meet your accuracy expectations?
Nature. It's cheaper than therapy.

Offline JLR

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Sep 2011
  • Posts: 46
  • Location: Wenatchee, WA
Re: Ask RBros Thread
« Reply #14 on: August 23, 2016, 01:55:08 PM »
How light could you make a rifle for big game that would meet your accuracy expectations?

Our long action Lightweight Hunters are 6.75# without glass or bipod. 
http://rbrosrifles.com/rifle-packages/lw-hunter/

 


* Advertisement

* Recent Topics

Deer Cape in the freezer by huntandjeep
[Today at 06:10:31 PM]


2020 Mudlfow Archery Elk Success & Write Up by SpicyTacos
[Today at 06:06:33 PM]


General season - public land Monster Washington whitetail by hunter399
[Today at 05:43:43 PM]


WTS: New Alps Outdoorz Yukon -30 Degree Sleeping Bag by zugbug
[Today at 05:36:45 PM]


Rl 26 by str8meat
[Today at 05:18:52 PM]


New State Record Ram by huntnphool
[Today at 05:10:27 PM]


How do the pheasant/chukkar game-farms work? by BD1
[Today at 05:08:25 PM]


Costco LEM Chamber Sealer by bigdub257
[Today at 05:05:37 PM]


Deer processing in Western WA by WapitiTalk1
[Today at 04:48:30 PM]


Shanks by Tight Spin
[Today at 04:47:01 PM]


2018 bear by BULLBLASTER
[Today at 04:40:05 PM]


Gear Failure Horror Stories by Stein
[Today at 04:25:14 PM]


Best Grizzly defense weapon by Woodhunter
[Today at 04:25:09 PM]


Let's talk Turkey day apps by OutHouse
[Today at 04:23:31 PM]


Heckuva November! by bassquatch
[Today at 04:20:16 PM]


Douglas 108 Cow Moose by nwskier
[Today at 04:16:11 PM]


Any info about this rifle by Woodhunter
[Today at 04:05:08 PM]


Drop camp Caribou by go4steelhd
[Today at 03:45:39 PM]


Rifle Choice SE Alaska Brown Bear by go4steelhd
[Today at 03:40:02 PM]


113 Late WT Season by Moe the Sleaze
[Today at 03:34:23 PM]