collapse

Advertisement


Author Topic: 6.5 Creedmoor Barrel length  (Read 9123 times)

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
6.5 Creedmoor Barrel length
« on: February 25, 2017, 07:44:43 PM »
 :) What length barrel would you want on a 6.5 Creedmoor? I have been looking at the Browning XBolt LR with a 26 inch barrel. That is a fairly small case so is the long barrel needed?
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: 6.5 Creedmoor Barrel length
« Reply #1 on: February 25, 2017, 07:52:48 PM »
I have been using 22" barrels in the gas guns.

I think 26 is trying to compensate for other deficiencies.


Online jrebel

  • Non-Hunting Topics
  • Trade Count: (+20)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 10602
  • Location: East Wenatchee
Re: 6.5 Creedmoor Barrel length
« Reply #2 on: February 25, 2017, 08:27:54 PM »
Most factory bolt guns run the 6.5 creedmoor at 22".  I have seen a few at 24" Savage Stealth and I believe Ruger precision.....and these are suppose to be their precision rifles so I would believe they have probably optimized the barrel length for that round.   :dunno:  Would be very interested to hear others opinions as it will probably be my next rifle and I was looking at the savage stealth.   

Offline TheHunt

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Sep 2007
  • Posts: 6238
  • Location: Western Washington
Re: 6.5 Creedmoor Barrel length
« Reply #3 on: February 25, 2017, 10:03:32 PM »
You can order a heavy barrel 26 inch length from the Ruger Precision.
275 down 2

Offline 257 Wby Mag

  • Non-Hunting Topics
  • Trade Count: (-1)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1974
  • Location: Chehalis
Re: 6.5 Creedmoor Barrel length
« Reply #4 on: February 25, 2017, 10:51:12 PM »
20" absolutely no longer than 22"....
Tod Riechert fan club.

Offline JBar

  • The Family "Guide"
  • Non-Hunting Topics
  • Trade Count: (+14)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 2095
  • Location: Puyallup
Re: 6.5 Creedmoor Barrel length
« Reply #5 on: February 26, 2017, 04:17:46 AM »
I have the xbolt western hunter in 6.5 with a 22" and it drives tacks. I'd say 26 isn't necessary on a hunting rig if that's your intention.
Shut up and Hunt!

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: 6.5 Creedmoor Barrel length
« Reply #6 on: February 26, 2017, 06:32:50 AM »
Keep in mind that accuracy really isn't dependent on barrel length at all. So depending on what the gun is for, don't feel tied to a long barrel
Kindly do not attempt to cloud the issue with too many facts.

Offline Bob33

  • Global Moderator
  • Trade Count: (+2)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21190
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: 6.5 Creedmoor Barrel length
« Reply #7 on: February 26, 2017, 06:42:20 AM »
The primary, and in many cases only advantage of a longer barrel is increased velocity. It may also balance better and reduce perceived muzzle blast.
Nature. It's cheaper than therapy.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: 6.5 Creedmoor Barrel length
« Reply #8 on: February 26, 2017, 10:13:04 AM »
to reword my question:
Considering the size of the case, burn time of powder, what would be the optimal barrel length? I am aware that barrel travel after all propellant is burnt actually slows the projectile down due to friction. I am also aware that the burn rate of the powder will have an impact.
With the small volume of the 6.5 case I am wondering if 26 might be too long.
 I am looking at Bolt guns and like nice guns that Browning caught my eye. Tikka apparently does not chamber the 6.5 Creedmoor, they do offer the 6.5X55.
thanks for your help
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: 6.5 Creedmoor Barrel length
« Reply #9 on: February 26, 2017, 10:39:20 AM »
to reword my question:
Considering the size of the case, burn time of powder, what would be the optimal barrel length? I am aware that barrel travel after all propellant is burnt actually slows the projectile down due to friction. I am also aware that the burn rate of the powder will have an impact.
With the small volume of the 6.5 case I am wondering if 26 might be too long.
 I am looking at Bolt guns and like nice guns that Browning caught my eye. Tikka apparently does not chamber the 6.5 Creedmoor, they do offer the 6.5X55.
thanks for your help
Carl

22" seems to be the point of diminishing returns with factory ammunition.

You could go shorter if shooting suppressed.

If speed is a big concern I'd think about 6.5 SAUM or 6.5 Short mag

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: 6.5 Creedmoor Barrel length
« Reply #10 on: February 26, 2017, 02:32:33 PM »
OK then! A stainless stalker Browning X bolt 22 inch, Leupold VX3 4.5X14, side focus, with either drop in dial or dots on the cross hair. I think I like dots on the cross hair better.
Carl

thanks to all
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: 6.5 Creedmoor Barrel length
« Reply #11 on: February 26, 2017, 05:16:43 PM »
Those x-bolts are pretty smooth rifles. Out of the box they are really good!
Kindly do not attempt to cloud the issue with too many facts.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: 6.5 Creedmoor Barrel length
« Reply #12 on: February 27, 2017, 03:57:13 PM »
just found out you can get the Tikka T3x in 6.5 Creedmoor, in the CTR model, 24 inch barrel, ten round mag. 8 lbs. (you can get 20 inch also)
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline 257 Wby Mag

  • Non-Hunting Topics
  • Trade Count: (-1)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1974
  • Location: Chehalis
Re: 6.5 Creedmoor Barrel length
« Reply #13 on: February 27, 2017, 04:09:03 PM »
A pard has the 20", dandy....
Tod Riechert fan club.

Offline Yondering

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 504
  • Location: Sedro Woolley
Re: 6.5 Creedmoor Barrel length
« Reply #14 on: February 28, 2017, 11:53:24 AM »
to reword my question:
Considering the size of the case, burn time of powder, what would be the optimal barrel length? I am aware that barrel travel after all propellant is burnt actually slows the projectile down due to friction. I am also aware that the burn rate of the powder will have an impact.
With the small volume of the 6.5 case I am wondering if 26 might be too long.
 

With that criteria, no, 26" is not too long; it will still give higher velocity than the same barrel at 22".

Most people recommending shorter barrels are doing so based on a convenient size of the gun, not a ballistically ideal length for maximum velocity.

Offline jnordwell

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2012
  • Posts: 114
  • Location: Camas Washington
Re: 6.5 Creedmoor Barrel length
« Reply #15 on: October 02, 2017, 09:31:09 PM »
I have a 6.5 in a weatherby vanguard with 24" barrel I'd think 22-24 is damn near perfect unless you want a lighter brush if u want a light at brush gun.

Offline savagehunter

  • Non-Hunting Topics
  • Trade Count: (+18)
  • Longhunter
  • *****
  • Join Date: Jan 2013
  • Posts: 746
  • Location: everett
Re: 6.5 Creedmoor Barrel length
« Reply #16 on: October 02, 2017, 10:42:40 PM »
I'm right around 2800 fps with 143 gr bullets out of a 20 inch barrel that should shoot as far as I'm able

Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1362
  • Location: Gig Harbor
Re: 6.5 Creedmoor Barrel length
« Reply #17 on: October 03, 2017, 05:35:17 AM »
I'm right around 2800 fps with 143 gr bullets out of a 20 inch barrel that should shoot as far as I'm able

Savagehunter - what powder are you running to get 2800 fps from a 20" with 143 grain bullets? RL17?

The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1362
  • Location: Gig Harbor
Re: 6.5 Creedmoor Barrel length
« Reply #18 on: October 03, 2017, 05:48:54 AM »
Carl - that tikka would make for a nice carry weight rifle and the 24" tube is a good compromise length. I haven't done any studies with the 6.5CM in various barrel lengths to know where the point of diminishing returns is on barrel length but I can tell you that my 26" varmint contour can accurately push 140 VLD's beyond 2900 fps with H4350. I find that pretty remarkable from that case. Now that rifle is purpose built for long range target work and varminting and not one I'd want to stalk through the woods with.   
The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+11)
  • Frontiersman
  • *****
  • Join Date: Oct 2009
  • Posts: 4484
  • Location: Eatonville wa
Re: 6.5 Creedmoor Barrel length
« Reply #19 on: October 03, 2017, 07:06:09 AM »
I have a Browning xbolt Hells Canyon in 6.5 with a 22" barrel. From what I found on the interwebs, the gains from a longer barrel are negligible at best for speed past 22". So if it's a hunting gun I wouldn't go any longer. My gun shoots really well with HSM Berger factory ammo and the Winchester LR.

Offline JLR

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2011
  • Posts: 46
  • Location: Wenatchee, WA
Re: 6.5 Creedmoor Barrel length
« Reply #20 on: October 03, 2017, 10:45:50 AM »
I have had both 24" and 26" versions for my comp guns and I didn't feel like I was giving anything up with the 24".  I ran 140s at 2800 in both guns as that was the sweet spot, and I think you could get there with a 22" barrel most likely as well and still maintain good barrel/brass life.  My recommendation would be the 24" for all around use as you will have more flexibility in powder/bullet/performance use.

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: 6.5 Creedmoor Barrel length
« Reply #21 on: October 03, 2017, 11:22:07 AM »
maybe accuracy is a plus thru the longer barrels.  It might be the mfgr found something as a bonus for the longer lengths.  Velocity isn't king, accuracy is.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: 6.5 Creedmoor Barrel length
« Reply #22 on: October 03, 2017, 07:48:34 PM »
20" - 22"  Velocity is great, accuracy is final. I've watched some amazing stuff done at distance with a 20" .338 Lapua.

Most don't realize powder selection is key when it comes to barrel length.

Offline kbrowne14

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2010
  • Posts: 194
Re: 6.5 Creedmoor Barrel length
« Reply #23 on: October 08, 2017, 05:42:35 PM »
I believe that most of the PRS guys running the 6.5 CM or 6.5x47, and others are running the 26 inch barrel for 1 reason or another, but check out this link.  http://precisionrifleblog.com/2013/07/16/6-5-creedmoor-barrel-length-and-muzzle-velocity/

The precision rifle blog does a lot of just comparing, and not so much having opinions. 

Check it out.
"We got a little distracted by somebody doin' the Repeater."

 "Huh. That'll happen.  That will happen."

 


* Advertisement

* Recent Topics

Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


Springer Fishing Opportunity 3/29 & 3/30 by xXLojackXx
[Today at 10:13:39 AM]


Bearpaw Season - Spring 2024 by Machias
[Today at 09:19:44 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal